On 9/29/21 5:58 PM, jarmo via wsjt-devel wrote:
Hi Marco, Jarmo and all,
Unfortunately not working. Compiled
hamlib-4.4~git-dd1376be-20210929.tar.gz and same behaviour.
If try to use NetHamlib rictl, audio does not go into radio.
CAT is not related to Audio.
Cat control works ok.
This is fine. hamlib does the job.
But if chosen Kenwood ts-590SG in WSJTX radio preferences, audio works
ok...
Please debug the audio matter. My suggestion, at first:
aplay -l
aplay -L
arecord -l
arecord -L
pactl list
Please examine the output.
As mentioned previously, if the "sound card" is connected via USB,
verify that gpsd (or another program) doesn't grasp the "sound card".
The output of dmesg can help.
Best wishes,
Claude (DJ0OT)
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
