Richard,
Can you rule out that this is not an RF interference? Because my FT-991 runs flawlessly with WSJTX v2.5.4 on Linux Mint 20.2. 73 de Uwe DG2YCB Von: Richard Shaw via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net] Gesendet: Sonntag, 16. Januar 2022 17:05 An: WSJT software development Cc: Richard Shaw Betreff: [wsjt-devel] FT-991A WSJT-X unusable for me Fedora Linux 35 hamlib master (as of a couple of days ago) WSJT-X 2.5.4 That being said, this has been a problem for some time for me over the last couple of hamlib releases and several WSJT-X releases. Mike has worked with me a couple of times to fix this, but it never STAYS fixed. When trying to TX in WSJT-X I get rapid relay clatter. Sometimes it's only been when using flrig, sometimes with both flrig and hamlib, which is the case right now. Running Flrig + Fldigi works fine. Running rigctl{,d} and putting the radio in TX works fine. Trying "Test PTT" in WSJT-X works fine But anytime I try to make a contact or press the PTT button I get rapid TX relay clatter. The audio is turned all the way down so it can't be too much audio signal, and anyway that usually goes into TX fine and then shuts down the radio when that happens. Here's a link to the rigctl log: https://www.dropbox.com/s/js4fiixbnzm9tsg/WSJT-X_RigControl.log Thanks, Richard KF5OIM
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
