On Sun, Jan 16, 2022 at 11:03 AM DG2YCB, Uwe via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote:
> Richard, > > > > Can you rule out that this is not an RF interference? Because my FT-991 > runs flawlessly with WSJTX v2.5.4 on Linux Mint 20.2. > Nothing else appears to be affected. Fldigi running PSK31, pat running ardop, keying CW, etc. On Sun, Jan 16, 2022 at 11:09 AM Tom M0LTE <t...@m0lte.uk> wrote: > Probably one for the main mailing list (https://wsjtx.groups.io/g/main) > rather than the dev mailing list > > That said, can you describe your whole cable setup please? The issue may > be obvious. > I posted here because Mike has helped me on the hamlib front on a couple of occasions already and been able to fix it, but it keeps rearing its ugly head. Nothing fancy, RF output hooked up to an 80m loop w/ 4:1 balun. Computer side is connected via the single USB connected using the radio's on board sound card. ttyUSB0 for CAT and ttyUSB1 for PTT. Radio is in DATA-U mode. Interestingly I don't get the green circle showing SPLIT until I change frequencies using the drop down. I would think it would initiate split on the front end. Thanks, Richard KF5OIM
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
