Uwe,
Are you using rig split? Richard is.
There is a problem in there for rig split.
Mike W9MDB
On Sunday, January 16, 2022, 11:03:11 AM CST, DG2YCB, Uwe via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
Richard,
Can you rule out that this is not an RF interference? Because my FT-991 runs
flawlessly with WSJTX v2.5.4 on Linux Mint 20.2.
73 de Uwe DG2YCB
Von: Richard Shaw via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net]
Gesendet: Sonntag, 16. Januar 2022 17:05
An: WSJT software development
Cc: Richard Shaw
Betreff: [wsjt-devel] FT-991A WSJT-X unusable for me
Fedora Linux 35
hamlib master (as of a couple of days ago)
WSJT-X 2.5.4
That being said, this has been a problem for some time for me over the last
couple of hamlib releases and several WSJT-X releases. Mike has worked with me
a couple of times to fix this, but it never STAYS fixed.
When trying to TX in WSJT-X I get rapid relay clatter. Sometimes it's only been
when using flrig, sometimes with both flrig and hamlib, which is the case right
now.
Running Flrig + Fldigi works fine.
Running rigctl{,d} and putting the radio in TX works fine.
Trying "Test PTT" in WSJT-X works fine
But anytime I try to make a contact or press the PTT button I get rapid TX
relay clatter. The audio is turned all the way down so it can't be too much
audio signal, and anyway that usually goes into TX fine and then shuts down the
radio when that happens.
Here's a link to the rigctl log:
https://www.dropbox.com/s/js4fiixbnzm9tsg/WSJT-X_RigControl.log
Thanks,
Richard
KF5OIM
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
