Hi Gary Have a look at these, which will hopefully help.
https://wsjt.sourceforge.io/Echo_Mode_in_WSJT-X_2.6.0.pdf http://www.bobatkins.com/radio/EME_WSJTX_echo_mode_basic_guide.html 73 Charlie DL3WDG On Wed, 22 Feb 2023 at 16:37, K9RX via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > I like to use ECHO to test the station on 6M EME. > > > > But the latest version has changed enough I was wondering if there was a > short help file for it? > > > > Also: The Echo graph will at times show the echo centered – and other > times show it offset. I have a jpg showing a recent echo run where the echo > was very strong – and it was showing it as the right numeric doppler shift, > 96 Hz, but it was showing it on the graph as -96Hz and there was no SNR > value reported (-99.0 shown). You can see the echo on the wide graph – you > can see the echo on the echo graph – but both have it lower than it should > be… > > > > A few minutes earlier I had 2 echos at -14.6 and others in to the low 20’s > – these were all showing on the spreadsheet – and “properly” on both the > wide and echo graphs. > > > > Gary Myers > > K9RX > > > > > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
