Hi Glenn, I am lost with your problem, if any. On the operator's point of view WSJT-X does not define any subbands. The whole audio is just a single entity, and the Split operation is totally automatic. You may select any audio frequency pointing on the waterfall and Shift-click. At the transmission wsjt-x applies a correct split depending on the current frequency (subband, if you like). You may also select any Tx frequency using Tx spinner or typing the frequency into that field. The spinner jumps one or ten hertz if you keep Ctrl down at the same time.
73, Reino OH3mA > -----Original Message----- > From: Glenn Williams via wsjt-devel <wsjt- > de...@lists.sourceforge.net> > Sent: Monday, December 2, 2024 4:20 PM > To: wsjt-devel@lists.sourceforge.net > Cc: Glenn Williams <a...@alumni.caltech.edu> > Subject: [wsjt-devel] Trivial FT8 power-up RIG->SPLIT > missing > > Scenario: Rig is TS590SG, 2.7.0 RC7 Win10 USB control, > 17m, RIG->SPLIT is default. > Definition: "audio subbands" 500-999, 1000-1499, etc. > Symptoms: > Power up rig, start FT8 on 17m (was the band in use when > shut down), VFO A only is displayed on rig. SPLIT not > displayed on rig. > Move TX audio a bit inside the same audio subband. No > VFO B & no SPLIT. > Note: TX audio moved with point & SHIFT-CLICK. > How to actuate RIG->SPLIT: (1) Transmit, or (2) move TX > audio to another subband. > --------------------------- > Issue importance: very low. > -Glenn, AF8C > > -- > This email has been checked for viruses by Avast antivirus > software. > www.avast.com > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
