Hello, I'm trying out zd1211rw in mainline and I'm having some problems.
As soon as I plug the dongle and udev loads the firmware the leds are shutting down and I can't subsequently use the wi-fi lan. [18375.748000] usb 1-1: USB disconnect, address 8 [18376.516000] eth0: no IPv6 routers present [18634.644000] usb 1-1: new full speed USB device using uhci_hcd and address 9 [18634.824000] usb 1-1: new device found, idVendor=6891, idProduct=a727 [18634.824000] usb 1-1: new device strings: Mfr=16, Product=32, SerialNumber=0 [18634.824000] usb 1-1: Product: 3CRUSB10075 [18634.824000] usb 1-1: Manufacturer: 3COM [18634.824000] usb 1-1: configuration #1 chosen from 1 choice [18635.136000] zd1211rw 1-1:1.0: firmware version 4605 [18635.216000] zd1211rw 1-1:1.0: zd1211 chip 6891:a727 v4330 full 00-14-7c RF2959_RF pa0 g-- [18635.244000] zd1211rw 1-1:1.0: eth1 I'm attaching the log of a debug enabled kernel. It seems iwlist eth1 scanning works, just the dongle can't get an IP. I'll be happy to test any patch or report more info. Thanks -- mattia :wq!
[ 0.000000] Linux version 2.6.18-rc1-mm2-3 ([EMAIL PROTECTED]) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #13 PREEMPT Sat Jul 15 20:12:24 CEST 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009e800 end: 000000000009e800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] add_memory_region(0000000000000000, 000000000009e800, 1) [ 0.000000] copy_e820_map() start: 000000000009e800 size: 0000000000001800 end: 00000000000a0000 type: 2 [ 0.000000] add_memory_region(000000000009e800, 0000000000001800, 2) [ 0.000000] copy_e820_map() start: 00000000000c0000 size: 0000000000010000 end: 00000000000d0000 type: 2 [ 0.000000] add_memory_region(00000000000c0000, 0000000000010000, 2) [ 0.000000] copy_e820_map() start: 00000000000d8000 size: 0000000000008000 end: 00000000000e0000 type: 2 [ 0.000000] add_memory_region(00000000000d8000, 0000000000008000, 2) [ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2 [ 0.000000] add_memory_region(00000000000e4000, 000000000001c000, 2) [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000000fdf0000 end: 000000000fef0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] add_memory_region(0000000000100000, 000000000fdf0000, 1) [ 0.000000] copy_e820_map() start: 000000000fef0000 size: 000000000000f000 end: 000000000feff000 type: 3 [ 0.000000] add_memory_region(000000000fef0000, 000000000000f000, 3) [ 0.000000] copy_e820_map() start: 000000000feff000 size: 0000000000001000 end: 000000000ff00000 type: 4 [ 0.000000] add_memory_region(000000000feff000, 0000000000001000, 4) [ 0.000000] copy_e820_map() start: 000000000ff00000 size: 0000000000080000 end: 000000000ff80000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] add_memory_region(000000000ff00000, 0000000000080000, 1) [ 0.000000] copy_e820_map() start: 000000000ff80000 size: 0000000000080000 end: 0000000010000000 type: 2 [ 0.000000] add_memory_region(000000000ff80000, 0000000000080000, 2) [ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000400000 end: 00000000ffc00000 type: 2 [ 0.000000] add_memory_region(00000000ff800000, 0000000000400000, 2) [ 0.000000] copy_e820_map() start: 00000000fffffc00 size: 0000000000000400 end: 0000000100000000 type: 2 [ 0.000000] add_memory_region(00000000fffffc00, 0000000000000400, 2) [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fef0000 (usable) [ 0.000000] BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data) [ 0.000000] BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000000ff00000 - 000000000ff80000 (usable) [ 0.000000] BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] 255MB LOWMEM available. [ 0.000000] On node 0 totalpages: 65408 [ 0.000000] DMA zone: 4096 pages, LIFO batch:0 [ 0.000000] Normal zone: 61312 pages, LIFO batch:15 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6cd0 [ 0.000000] ACPI: RSDT (v001 SONY C0 0x20010809 PTL 0x00000000) @ 0x0fefa88f [ 0.000000] ACPI: FADT (v001 SONY C0 0x20010809 PTL 0x01000000) @ 0x0fefef64 [ 0.000000] ACPI: BOOT (v001 SONY C0 0x20010809 PTL 0x00000001) @ 0x0fefefd8 [ 0.000000] ACPI: DSDT (v001 SONY C0 0x20010809 PTL 0x0100000d) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:ef800000) [ 0.000000] Detected 994.275 MHz processor. [ 7.571386] Built 1 zonelists. Total pages: 65408 [ 7.571392] Kernel command line: root=/dev/hda1 ro vga=extended video=radeonfb:[EMAIL PROTECTED] fbcon=font:Acorn8x8 lapic resume=/dev/hda2 [ 7.571994] Local APIC disabled by BIOS -- reenabling. [ 7.571999] Found and enabled local APIC! [ 7.572005] mapped APIC to ffffd000 (fee00000) [ 7.572012] Enabling fast FPU save and restore... done. [ 7.572017] Enabling unmasked SIMD FPU exception support... done. [ 7.572022] Initializing CPU#0 [ 7.572092] CPU 0 irqstacks, hard=c0436000 soft=c0437000 [ 7.572099] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 7.574683] Console: colour VGA+ 80x50 [ 7.577058] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 7.577379] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 7.592630] Memory: 255228k/261632k available (2147k kernel code, 5844k reserved, 590k data, 188k init, 0k highmem) [ 7.592693] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 7.672012] Calibrating delay using timer specific routine.. 1989.90 BogoMIPS (lpj=3979806) [ 7.672133] Security Framework v1.0.0 initialized [ 7.672204] Mount-cache hash table entries: 512 [ 7.672422] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.672435] CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.672452] CPU: L1 I cache: 16K, L1 D cache: 16K [ 7.672524] CPU: L2 cache: 512K [ 7.672565] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 [ 7.672577] Intel machine check architecture supported. [ 7.672623] Intel machine check reporting enabled on CPU#0. [ 7.672679] CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01 [ 7.672786] Checking 'hlt' instruction... OK. [ 7.688104] ACPI: Core revision 20060707 [ 7.690393] tbxface-0107 [01] load_tables : ACPI Tables successfully acquired [ 7.700470] Parsing all Control Methods: [ 7.700821] Table [DSDT](id 0005) - 555 Objects with 54 Devices 191 Methods 21 Regions [ 7.700911] ACPI Namespace successfully loaded at root c04692f0 [ 7.734671] evxfevnt-0089 [02] enable : Transition to ACPI mode successful [ 7.843009] NET: Registered protocol family 16 [ 7.843186] ACPI: bus type pci registered [ 7.846771] PCI: PCI BIOS revision 2.10 entry at 0xfd9aa, last bus=2 [ 7.846817] Setting up standard PCI resources [ 7.856394] evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 [ 7.856520] evgpeblk-0951 [04] ev_create_gpe_block : GPE 10 to 1F [_GPE] 2 regs on int 0x9 [ 7.857460] evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 0 Runtime GPEs in this block [ 7.857903] evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 1 Wake, Enabled 0 Runtime GPEs in this block [ 7.862115] Completing Region/Field/Buffer/Package initialization:.............................................................. [ 7.867839] Initialized 20/21 Regions 0/0 Fields 25/25 Buffers 17/27 Packages (564 nodes) [ 7.867940] Initializing Device/Processor/Thermal objects by executing _INI methods:... [ 7.875242] Executed 3 _INI methods requiring 3 _STA executions (examined 58 objects) [ 7.875360] ACPI: Interpreter enabled [ 7.875401] ACPI: Using PIC for interrupt routing [ 7.876430] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 7.876478] PCI: Probing PCI hardware (bus 00) [ 7.909850] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 7.909898] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 7.909995] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 7.910281] Boot video device is 0000:01:00.0 [ 7.910501] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 7.910618] PCI: Transparent bridge - 0000:00:1e.0 [ 7.910743] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') [ 7.910797] Please report the result to linux-kernel to fix this permanently [ 7.910911] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') [ 7.910965] Please report the result to linux-kernel to fix this permanently [ 7.911038] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 7.918070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 7.919320] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 7.923302] ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode. [ 7.962504] ACPI: PCI Interrupt Link [LNKA] (IRQs *9) [ 7.963559] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled. [ 7.964682] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled. [ 7.965982] ACPI: PCI Interrupt Link [LNKD] (IRQs *9) [ 7.967231] ACPI: PCI Interrupt Link [LNKE] (IRQs *9) [ 7.968485] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0 [ 7.969578] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled. [ 7.970689] ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled. [ 7.971225] Linux Plug and Play Support v0.97 (c) Adam Belay [ 7.971309] Intel 82802 RNG detected [ 7.971547] PCI: Using ACPI for IRQ routing [ 7.971591] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 7.976569] PCI: Bridge: 0000:00:01.0 [ 7.976614] IO window: 3000-3fff [ 7.976658] MEM window: d0100000-d01fffff [ 7.976702] PREFETCH window: d8000000-dfffffff [ 7.976761] PCI: Bus 3, cardbus bridge: 0000:02:05.0 [ 7.976805] IO window: 00004400-000044ff [ 7.976848] IO window: 00004800-000048ff [ 7.976893] PREFETCH window: 20000000-21ffffff [ 7.976937] MEM window: 24000000-25ffffff [ 7.976981] PCI: Bus 7, cardbus bridge: 0000:02:05.1 [ 7.977024] IO window: 00004c00-00004cff [ 7.977068] IO window: 00001400-000014ff [ 7.977112] PREFETCH window: 22000000-23ffffff [ 7.977157] MEM window: 26000000-27ffffff [ 7.977200] PCI: Bridge: 0000:00:1e.0 [ 7.977243] IO window: 4000-4fff [ 7.977287] MEM window: d0200000-d02fffff [ 7.977332] PREFETCH window: 20000000-23ffffff [ 7.977392] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 7.978516] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9 [ 7.978562] PCI: setting IRQ 9 as level-triggered [ 7.978568] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9 [ 7.978685] PCI: Setting latency timer of device 0000:02:05.0 to 64 [ 7.979786] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9 [ 7.979831] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKG] -> GSI 9 (level, low) -> IRQ 9 [ 7.979946] PCI: Setting latency timer of device 0000:02:05.1 to 64 [ 7.979988] NET: Registered protocol family 2 [ 8.015818] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 8.016031] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 8.016142] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 8.016219] TCP: Hash tables configured (established 8192 bind 4096) [ 8.016264] TCP reno registered [ 8.016514] Simple Boot Flag at 0x36 set to 0x1 [ 8.017959] Initializing Cryptographic API [ 8.018011] io scheduler noop registered [ 8.018089] io scheduler anticipatory registered [ 8.018166] io scheduler deadline registered [ 8.018258] io scheduler cfq registered (default) [ 8.019964] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 [ 8.020012] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 8.031715] radeonfb: Retrieved PLL infos from BIOS [ 8.031761] radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz [ 8.031814] radeonfb: PLL min 12000 max 35000 [ 8.966934] Non-DDC laptop panel detected [ 9.962101] radeonfb: Monitor 1 type LCD found [ 9.962145] radeonfb: Monitor 2 type no found [ 9.964562] radeonfb: panel ID string: Samsung LTN150P1-L02 [ 9.964607] radeonfb: detected LVDS panel size from BIOS: 1400x1050 [ 9.964652] radeondb: BIOS provided dividers will be used [ 10.197903] radeonfb: Dynamic Clock Power Management enabled [ 10.380535] Console: switching to colour frame buffer device 100x75 [ 10.470537] radeonfb (0000:01:00.0): ATI Radeon LY [ 10.472903] ACPI: AC Adapter [ACAD] (on-line) [ 10.481459] ACPI: Battery Slot [BAT1] (battery present) [ 10.483676] ACPI: Battery Slot [BAT2] (battery absent) [ 10.483798] ACPI: Lid Switch [LID] [ 10.483883] ACPI: Power Button (CM) [PWRB] [ 10.484186] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 2.784000] ACPI: Thermal Zone [ATF0] (54 C) [ 2.784000] isapnp: Scanning for PnP cards... [ 3.136000] isapnp: No Plug & Play device found [ 3.184000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 3.184000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.184000] ICH3M: IDE controller at PCI slot 0000:00:1f.1 [ 3.184000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 3.184000] ACPI: Unable to derive IRQ for device 0000:00:1f.1 [ 3.184000] ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI [ 3.184000] ICH3M: chipset revision 1 [ 3.184000] ICH3M: not 100% native mode: will probe irqs later [ 3.184000] ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio [ 3.188000] ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio [ 3.188000] Probing IDE interface ide0... [ 3.476000] hda: FUJITSU MHV2080AH, ATA DISK drive [ 4.148000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.152000] Probing IDE interface ide1... [ 4.720000] Probing IDE interface ide1... [ 5.288000] hda: max request size: 128KiB [ 5.360000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [ 5.364000] hda: cache flushes supported [ 5.368000] hda: hda1 hda2 hda3 hda4 < hda5 hda6 > [ 5.412000] PNP: No PS/2 controller found. Probing ports directly. [ 5.420000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.424000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.428000] mice: PS/2 mouse device common for all mice [ 5.432000] TCP bic registered [ 5.436000] NET: Registered protocol family 1 [ 5.440000] NET: Registered protocol family 17 [ 5.444000] Testing NMI watchdog ... OK. [ 5.488000] Using IPI Shortcut mode [ 5.492000] input: AT Translated Set 2 keyboard as /class/input/input0 [ 5.496000] Time: tsc clocksource has been installed. [ 5.500000] ACPI: (supports S0 S3 S4 S5) [ 5.504000] Time: acpi_pm clocksource has been installed. [ 5.508000] Freeing unused kernel memory: 188k freed [ 5.580000] Attempting manual resume [ 5.656000] ReiserFS: hda1: found reiserfs format "3.6" with standard journal [ 5.660000] ReiserFS: hda1: using ordered data mode [ 5.680000] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 5.688000] ReiserFS: hda1: checking transaction log (hda1) [ 5.748000] ReiserFS: hda1: Using r5 hash to sort names [ 6.884000] warning: process `touch' used the removed sysctl system call [ 7.080000] warning: process `touch' used the removed sysctl system call [ 9.908000] Linux agpgart interface v0.101 (c) Dave Jones [ 9.992000] agpgart: Detected an Intel 830M Chipset. [ 10.012000] agpgart: AGP aperture is 256M @ 0xe0000000 [ 10.428000] input: PC Speaker as /class/input/input1 [ 10.452000] e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI [ 10.456000] e100: Copyright(c) 1999-2005 Intel Corporation [ 10.460000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 [ 10.464000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 [ 10.492000] e100: eth0: e100_probe: addr 0xd0204000, irq 9, MAC addr 08:00:46:26:50:59 [ 10.528000] usbcore: registered new interface driver usbfs [ 10.532000] usbcore: registered new interface driver hub [ 10.536000] usbcore: registered new device driver usb [ 10.628000] Yenta: CardBus bridge found at 0000:02:05.0 [104d:80e7] [ 10.652000] USB Universal Host Controller Interface driver v3.0 [ 10.656000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 10.660000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 10.660000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 10.664000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 10.668000] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001800 [ 10.672000] usb usb1: new device found, idVendor=0000, idProduct=0000 [ 10.676000] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.680000] usb usb1: Product: UHCI Host Controller [ 10.684000] usb usb1: Manufacturer: Linux 2.6.18-rc1-mm2-3 uhci_hcd [ 10.688000] usb usb1: SerialNumber: 0000:00:1d.0 [ 10.692000] usb usb1: configuration #1 chosen from 1 choice [ 10.696000] hub 1-0:1.0: USB hub found [ 10.700000] hub 1-0:1.0: 2 ports detected [ 10.808000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 10.812000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 10.816000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 10.816000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 10.820000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9 [ 10.824000] Socket status: 30000006 [ 10.828000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 10.832000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 10.836000] cs: IO port probe 0x4000-0x4fff: clean. [ 10.840000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff [ 10.848000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 10.852000] uhci_hcd 0000:00:1d.1: irq 9, io base 0x00001820 [ 10.856000] usb usb2: new device found, idVendor=0000, idProduct=0000 [ 10.860000] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.864000] usb usb2: Product: UHCI Host Controller [ 10.868000] usb usb2: Manufacturer: Linux 2.6.18-rc1-mm2-3 uhci_hcd [ 10.872000] usb usb2: SerialNumber: 0000:00:1d.1 [ 10.876000] usb usb2: configuration #1 chosen from 1 choice [ 10.880000] hub 2-0:1.0: USB hub found [ 10.884000] hub 2-0:1.0: 2 ports detected [ 10.888000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff [ 10.892000] Yenta: CardBus bridge found at 0000:02:05.1 [104d:80e7] [ 10.992000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 [ 10.996000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 [ 11.000000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 11.000000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 11.004000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 11.008000] uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001840 [ 11.012000] usb usb3: new device found, idVendor=0000, idProduct=0000 [ 11.016000] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.020000] usb usb3: Product: UHCI Host Controller [ 11.024000] usb usb3: Manufacturer: Linux 2.6.18-rc1-mm2-3 uhci_hcd [ 11.028000] usb usb3: SerialNumber: 0000:00:1d.2 [ 11.032000] usb usb3: configuration #1 chosen from 1 choice [ 11.036000] hub 3-0:1.0: USB hub found [ 11.040000] hub 3-0:1.0: 2 ports detected [ 11.048000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9 [ 11.052000] Socket status: 30000006 [ 11.056000] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 11.060000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 11.064000] cs: IO port probe 0x4000-0x4fff: clean. [ 11.068000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff [ 11.072000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff [ 11.148000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 11.152000] ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 11.156000] PCI: Enabling device 0000:00:1f.5 (0000 -> 0001) [ 11.160000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 11.164000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 11.232000] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 11.412000] usb 2-1: new device found, idVendor=046d, idProduct=c001 [ 11.416000] usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 11.420000] usb 2-1: Product: USB Mouse [ 11.424000] usb 2-1: Manufacturer: Logitech [ 11.428000] usb 2-1: configuration #1 chosen from 1 choice [ 11.676000] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 11.720000] cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x37f [ 11.724000] cs: IO port probe 0x3e0-0x4ff: excluding 0x3f8-0x3ff 0x4d0-0x4d7 [ 11.728000] cs: IO port probe 0x820-0x8ff: clean. [ 11.732000] cs: IO port probe 0xc00-0xcf7: clean. [ 11.736000] intel8x0_measure_ac97_clock: measured 68621 usecs [ 11.740000] intel8x0: clocking to 48000 [ 11.744000] cs: IO port probe 0xa00-0xaff: clean. [ 11.756000] cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x37f [ 11.760000] cs: IO port probe 0x3e0-0x4ff: excluding 0x3f8-0x3ff 0x4d0-0x4d7 [ 11.764000] cs: IO port probe 0x820-0x8ff: clean. [ 11.772000] cs: IO port probe 0xc00-0xcf7: clean. [ 11.780000] cs: IO port probe 0xa00-0xaff: clean. [ 11.848000] usb 3-1: new device found, idVendor=054c, idProduct=0056 [ 11.852000] usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 [ 11.856000] usb 3-1: Product: USB Memory Stick Slot [ 11.860000] usb 3-1: Manufacturer: Sony [ 11.864000] usb 3-1: configuration #1 chosen from 1 choice [ 11.888000] input: Logitech USB Mouse as /class/input/input2 [ 11.896000] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1 [ 11.900000] usbcore: registered new interface driver usbhid [ 11.904000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 11.988000] SCSI subsystem initialized [ 12.012000] Initializing USB Mass Storage driver... [ 12.016000] scsi0 : SCSI emulation for USB Mass Storage devices [ 12.020000] usb-storage: device found at 2 [ 12.020000] usb-storage: waiting for device to settle before scanning [ 12.020000] usbcore: registered new interface driver usb-storage [ 12.024000] USB Mass Storage support registered. [ 12.216000] warning: process `touch' used the removed sysctl system call [ 12.248000] warning: process `touch' used the removed sysctl system call [ 12.616000] Adding 248996k swap on /dev/hda2. Priority:-1 extents:1 across:248996k [ 17.020000] Vendor: Sony Model: MSC-U02 Rev: 1.00 [ 17.024000] Type: Direct-Access ANSI SCSI revision: 00 [ 17.036000] usb-storage: device scan complete [ 17.140000] SCSI device sda: 7904 512-byte hdwr sectors (4 MB) [ 17.148000] sda: Write Protect is off [ 17.152000] sda: Mode Sense: 00 6a 10 00 [ 17.152000] sda: assuming drive cache: write through [ 17.168000] SCSI device sda: 7904 512-byte hdwr sectors (4 MB) [ 17.176000] sda: Write Protect is off [ 17.180000] sda: Mode Sense: 00 6a 10 00 [ 17.180000] sda: assuming drive cache: write through [ 17.184000] sda: sda1 [ 17.200000] sd 0:0:0:0: Attached scsi removable disk sda [ 18.128000] warning: process `touch' used the removed sysctl system call [ 21.044000] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 21.060000] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [ 21.064000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [ 21.068000] sonypi: device allocated minor is 63 [ 21.088000] input: Sony Vaio Jogdial as /class/input/input3 [ 21.156000] input: Sony Vaio Keys as /class/input/input4 [ 21.296000] tun: Universal TUN/TAP device driver, 1.6 [ 21.300000] tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]> [ 21.352000] ACPI Sony Notebook Control Driver v0.2 successfully installed [ 21.392000] Real Time Clock Driver v1.12ac [ 21.440000] device-mapper: ioctl: 4.8.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED] [ 21.864000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2548b1, caps: 0x804753/0x0 [ 21.900000] input: SynPS/2 Synaptics TouchPad as /class/input/input5 [ 29.000000] ReiserFS: hda3: found reiserfs format "3.6" with standard journal [ 29.004000] ReiserFS: hda3: using ordered data mode [ 29.020000] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 29.028000] ReiserFS: hda3: checking transaction log (hda3) [ 29.092000] ReiserFS: hda3: Using r5 hash to sort names [ 29.308000] JFS: nTxBlock = 1996, nTxLock = 15970 [ 39.156000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 39.308000] ip_conntrack version 2.4 (2044 buckets, 16352 max) - 224 bytes per conntrack [ 39.740000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 45.672000] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). [ 45.800000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 45.808000] NFSD: starting 90-second grace period [ 48.676000] NET: Registered protocol family 10 [ 48.680000] IPv6 over IPv4 tunneling driver [ 58.808000] eth0: no IPv6 routers present [ 104.508000] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 104.680000] usb 1-1: new device found, idVendor=6891, idProduct=a727 [ 104.684000] usb 1-1: new device strings: Mfr=16, Product=32, SerialNumber=0 [ 104.688000] usb 1-1: Product: 3CRUSB10075 [ 104.692000] usb 1-1: Manufacturer: 3COM [ 104.696000] usb 1-1: configuration #1 chosen from 1 choice [ 104.776000] ieee80211_crypt: registered algorithm 'NULL' [ 104.792000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 104.800000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> [ 104.904000] usb_init() [ 104.904000] usb 1-1: print_id() 6891:a727 v4330 full [ 104.904000] zd1211rw 1-1:1.0: zd_netdev_alloc() netdev->flags 0x1002 [ 104.904000] zd1211rw 1-1:1.0: zd_netdev_alloc() netdev->features 0x00000000 [ 104.908000] usb 1-1: request_fw_file() fw name zd1211/zd1211_ub [ 104.968000] usb 1-1: upload_firmware() firmware device id 0x4330 is equal to the actual device id [ 104.968000] usb 1-1: request_fw_file() fw name zd1211/zd1211_uphr [ 104.992000] usb 1-1: upload_code() transfer size 4096 [ 105.004000] usb 1-1: upload_code() transfer size 1024 [ 105.008000] usb 1-1: upload_code() firmware confirm return value 0x01 [ 105.012000] zd1211rw 1-1:1.0: zd_usb_enable_int() [ 105.012000] zd1211rw 1-1:1.0: zd_usb_enable_int() submit urb c5d722c0 [ 105.012000] zd1211rw 1-1:1.0: zd_chip_init_hw() [ 105.012000] zd1211rw 1-1:1.0: dump_cr() CR_AFTER_PNP 0x00000000 [ 105.016000] zd1211rw 1-1:1.0: dump_cr() CR_GPI_EN 0x00000000 [ 105.020000] zd1211rw 1-1:1.0: dump_cr() CR_INTERRUPT 0x00000000 [ 105.024000] zd1211rw 1-1:1.0: zd_usb_init_hw() fw_base_offset: 0xf7d4 [ 105.028000] zd1211rw 1-1:1.0: read_pod() E2P_POD 0x0000011d [ 105.028000] zd1211rw 1-1:1.0: read_pod() RF RF2959_RF 0xd PA type 0x0 patch CCK 1 patch CR157 0 patch 6M 0 [ 105.028000] zd1211rw 1-1:1.0: hw_init() [ 105.028000] zd1211rw 1-1:1.0: zd1211_hw_reset_phy() [ 105.032000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0x00 -> 0x00 [ 105.048000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x00 -> 0x80 [ 105.048000] zd1211rw 1-1:1.0: zd1211_hw_init_hmac() [ 105.052000] zd1211rw 1-1:1.0: get_aw_pt_bi() aw 0 pt 0 bi 0 [ 105.056000] zd1211rw 1-1:1.0: set_aw_pt_bi() aw 0 pt 99 bi 100 [ 105.056000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 105.064000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0000007 bits 24 [ 105.064000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x007dd43 bits 24 [ 105.068000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0080959 bits 24 [ 105.072000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x00e6666 bits 24 [ 105.076000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0116a57 bits 24 [ 105.076000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x017dd43 bits 24 [ 105.080000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819f9 bits 24 [ 105.084000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 105.088000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0214554 bits 24 [ 105.088000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x025e7fa bits 24 [ 105.092000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x027fffa bits 24 [ 105.096000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0294128 bits 24 [ 105.100000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x02c0000 bits 24 [ 105.100000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0300000 bits 24 [ 105.104000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0340000 bits 24 [ 105.108000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0381e0f bits 24 [ 105.112000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x06c180f bits 24 [ 105.116000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 105.116000] zd1211rw 1-1:1.0: firmware version 4605 [ 105.124000] zd1211rw 1-1:1.0: dump_fw_registers() FW_FIRMWARE_VER 0x4605 [ 105.124000] zd1211rw 1-1:1.0: dump_fw_registers() FW_USB_SPEED 0x0000 [ 105.124000] zd1211rw 1-1:1.0: dump_fw_registers() FW_FIX_TX_RATE 0x0000 [ 105.124000] zd1211rw 1-1:1.0: dump_fw_registers() FW_LINK_STATUS 0x0000 [ 105.124000] zd1211rw 1-1:1.0: dump_cr() CR_AFTER_PNP 0x00000001 [ 105.128000] zd1211rw 1-1:1.0: dump_cr() CR_GPI_EN 0x00000000 [ 105.132000] zd1211rw 1-1:1.0: dump_cr() CR_INTERRUPT 0x00000000 [ 105.196000] zd1211rw 1-1:1.0: zd1211 chip 6891:a727 v4330 full 00-14-7c RF2959_RF pa0 g-- [ 105.204000] zd1211rw 1-1:1.0: zd_write_mac_addr() mac addr 00:14:7c:67:cc:ef [ 105.208000] zd1211rw 1-1:1.0: zd_read_regdomain() regdomain: 0x10 [ 105.208000] zd1211rw 1-1:1.0: regdomain 0x10 [ 105.212000] zd1211rw 1-1:1.0: zd_usb_disable_int() urb c5d722c0 killed [ 105.212000] zd1211rw 1-1:1.0: probe() successful [ 105.212000] zd1211rw 1-1:1.0: eth1 [ 105.216000] usbcore: registered new interface driver zd1211rw [ 105.224000] zd1211rw initialized [ 175.884000] zd1211rw 1-1:1.0: zd_usb_enable_int() [ 175.884000] zd1211rw 1-1:1.0: zd_usb_enable_int() submit urb cda9f620 [ 175.892000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 175.896000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 175.896000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 175.900000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 1 [ 175.900000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181979 bits 24 [ 175.900000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 175.904000] zd1211rw 1-1:1.0: update_pwr_int() channel 1 pwr_int 0xa8 [ 175.908000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 175.912000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 175.912000] zd1211rw 1-1:1.0: zd_usb_enable_rx() [ 175.912000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 182.584000] SoftMAC: Associate: Scanning for networks first. [ 182.588000] SoftMAC: Start scanning with channel: 1 [ 182.588000] SoftMAC: Scanning 11 channels [ 182.592000] zd1211rw 1-1:1.0: set_channel() channel 1 [ 182.592000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 182.592000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 1 [ 182.592000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181979 bits 24 [ 182.596000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 182.600000] zd1211rw 1-1:1.0: update_pwr_int() channel 1 pwr_int 0xa8 [ 182.600000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 182.604000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 182.616000] ieee80211_crypt: registered algorithm 'WEP' [ 182.628000] zd1211rw 1-1:1.0: set_channel() channel 2 [ 182.628000] zd1211rw 1-1:1.0: set_security() [ 182.628000] zd1211rw 1-1:1.0: set_security() .active_key = 0 [ 182.628000] zd1211rw 1-1:1.0: set_security() .level = 1 [ 182.628000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 182.628000] zd1211rw 1-1:1.0: set_security() .enabled = 1 [ 182.628000] zd1211rw 1-1:1.0: set_security() .encrypt = 1 [ 182.628000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 2 [ 182.628000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181989 bits 24 [ 182.632000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 182.636000] zd1211rw 1-1:1.0: update_pwr_int() channel 2 pwr_int 0xb0 [ 182.636000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 182.640000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 182.660000] zd1211rw 1-1:1.0: set_channel() channel 3 [ 182.660000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 182.660000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 3 [ 182.660000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181999 bits 24 [ 182.664000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 182.668000] zd1211rw 1-1:1.0: update_pwr_int() channel 3 pwr_int 0xb0 [ 182.672000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 182.676000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 182.696000] zd1211rw 1-1:1.0: set_channel() channel 4 [ 182.696000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 182.696000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 4 [ 182.696000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819a9 bits 24 [ 182.700000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 182.704000] zd1211rw 1-1:1.0: update_pwr_int() channel 4 pwr_int 0xb0 [ 182.708000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 182.712000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 182.732000] zd1211rw 1-1:1.0: set_channel() channel 5 [ 182.732000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 182.732000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 5 [ 182.732000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819b9 bits 24 [ 182.736000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 182.740000] zd1211rw 1-1:1.0: update_pwr_int() channel 5 pwr_int 0xa8 [ 182.744000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 182.748000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 182.768000] zd1211rw 1-1:1.0: set_channel() channel 6 [ 182.768000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 182.768000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 6 [ 182.768000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819c9 bits 24 [ 182.772000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 182.776000] zd1211rw 1-1:1.0: update_pwr_int() channel 6 pwr_int 0xb0 [ 182.780000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 182.784000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 182.804000] zd1211rw 1-1:1.0: set_channel() channel 7 [ 182.804000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 182.804000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 7 [ 182.804000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819d9 bits 24 [ 182.808000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 182.812000] zd1211rw 1-1:1.0: update_pwr_int() channel 7 pwr_int 0xb0 [ 182.816000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 182.820000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 182.840000] zd1211rw 1-1:1.0: set_channel() channel 8 [ 182.840000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 182.840000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 8 [ 182.840000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819e9 bits 24 [ 182.844000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 182.848000] zd1211rw 1-1:1.0: update_pwr_int() channel 8 pwr_int 0xb0 [ 182.852000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 182.856000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 182.876000] zd1211rw 1-1:1.0: set_channel() channel 9 [ 182.876000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 182.876000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 9 [ 182.876000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819f9 bits 24 [ 182.880000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 182.884000] zd1211rw 1-1:1.0: update_pwr_int() channel 9 pwr_int 0xa8 [ 182.888000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 182.892000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 182.912000] zd1211rw 1-1:1.0: set_channel() channel 10 [ 182.912000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 182.912000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 10 [ 182.912000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181a09 bits 24 [ 182.916000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 182.920000] zd1211rw 1-1:1.0: update_pwr_int() channel 10 pwr_int 0xb0 [ 182.920000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 182.924000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 182.948000] zd1211rw 1-1:1.0: set_channel() channel 11 [ 182.948000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 182.948000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 11 [ 182.948000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181a19 bits 24 [ 182.952000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 182.956000] zd1211rw 1-1:1.0: update_pwr_int() channel 11 pwr_int 0xb0 [ 182.956000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 182.960000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 182.984000] SoftMAC: Scanning finished [ 182.988000] SoftMAC: Queueing Authentication Request to 00:16:b6:55:01:31 [ 182.992000] SoftMAC: Cannot associate without being authenticated, requested authentication [ 182.996000] zd1211rw 1-1:1.0: set_channel() channel 11 [ 182.996000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 182.996000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 11 [ 182.996000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181a19 bits 24 [ 183.000000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 183.004000] zd1211rw 1-1:1.0: update_pwr_int() channel 11 pwr_int 0xb0 [ 183.008000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 183.012000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 183.012000] SoftMAC: Sent Authentication Request to 00:16:b6:55:01:31. [ 183.016000] SoftMAC: Open Authentication completed with 00:16:b6:55:01:31 [ 183.020000] zd1211rw 1-1:1.0: set_channel() channel 11 [ 183.020000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 183.020000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 11 [ 183.020000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181a19 bits 24 [ 183.024000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 183.028000] zd1211rw 1-1:1.0: update_pwr_int() channel 11 pwr_int 0xb0 [ 183.028000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 183.032000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 183.036000] SoftMAC: sent association request! [ 183.040000] SoftMAC: associated! [ 183.044000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 193.452000] eth1: no IPv6 routers present [ 234.408000] zd1211rw 1-1:1.0: iw_get_range() [ 234.408000] SoftMAC: Start scanning with channel: 1 [ 234.408000] SoftMAC: Scanning 11 channels [ 234.412000] zd1211rw 1-1:1.0: set_channel() channel 1 [ 234.412000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 234.416000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 1 [ 234.416000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181979 bits 24 [ 234.416000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 234.420000] zd1211rw 1-1:1.0: update_pwr_int() channel 1 pwr_int 0xa8 [ 234.424000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 234.428000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 234.448000] zd1211rw 1-1:1.0: set_channel() channel 2 [ 234.448000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 234.448000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 2 [ 234.448000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181989 bits 24 [ 234.452000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 234.456000] zd1211rw 1-1:1.0: update_pwr_int() channel 2 pwr_int 0xb0 [ 234.456000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 234.460000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 234.484000] zd1211rw 1-1:1.0: set_channel() channel 3 [ 234.484000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 234.484000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 3 [ 234.484000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181999 bits 24 [ 234.488000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 234.492000] zd1211rw 1-1:1.0: update_pwr_int() channel 3 pwr_int 0xb0 [ 234.492000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 234.496000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 234.520000] zd1211rw 1-1:1.0: set_channel() channel 4 [ 234.520000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 234.520000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 4 [ 234.520000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819a9 bits 24 [ 234.524000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 234.528000] zd1211rw 1-1:1.0: update_pwr_int() channel 4 pwr_int 0xb0 [ 234.528000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 234.532000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 234.556000] zd1211rw 1-1:1.0: set_channel() channel 5 [ 234.556000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 234.556000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 5 [ 234.556000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819b9 bits 24 [ 234.560000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 234.564000] zd1211rw 1-1:1.0: update_pwr_int() channel 5 pwr_int 0xa8 [ 234.564000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 234.568000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 234.592000] zd1211rw 1-1:1.0: set_channel() channel 6 [ 234.592000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 234.592000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 6 [ 234.592000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819c9 bits 24 [ 234.596000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 234.600000] zd1211rw 1-1:1.0: update_pwr_int() channel 6 pwr_int 0xb0 [ 234.600000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 234.604000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 234.628000] zd1211rw 1-1:1.0: set_channel() channel 7 [ 234.628000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 234.628000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 7 [ 234.628000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819d9 bits 24 [ 234.632000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 234.636000] zd1211rw 1-1:1.0: update_pwr_int() channel 7 pwr_int 0xb0 [ 234.636000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 234.640000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 234.664000] zd1211rw 1-1:1.0: set_channel() channel 8 [ 234.664000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 234.664000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 8 [ 234.664000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819e9 bits 24 [ 234.668000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 234.672000] zd1211rw 1-1:1.0: update_pwr_int() channel 8 pwr_int 0xb0 [ 234.672000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 234.676000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 234.700000] zd1211rw 1-1:1.0: set_channel() channel 9 [ 234.700000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 234.700000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 9 [ 234.700000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819f9 bits 24 [ 234.704000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 234.708000] zd1211rw 1-1:1.0: update_pwr_int() channel 9 pwr_int 0xa8 [ 234.708000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 234.712000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 234.736000] zd1211rw 1-1:1.0: set_channel() channel 10 [ 234.736000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 234.736000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 10 [ 234.736000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181a09 bits 24 [ 234.740000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 234.744000] zd1211rw 1-1:1.0: update_pwr_int() channel 10 pwr_int 0xb0 [ 234.744000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 234.748000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 234.772000] zd1211rw 1-1:1.0: set_channel() channel 11 [ 234.772000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 234.772000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 11 [ 234.772000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181a19 bits 24 [ 234.776000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 234.780000] zd1211rw 1-1:1.0: update_pwr_int() channel 11 pwr_int 0xb0 [ 234.780000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 234.784000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 234.808000] SoftMAC: Scanning finished [ 234.812000] zd1211rw 1-1:1.0: set_channel() channel 11 [ 234.812000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 234.816000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 11 [ 234.816000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181a19 bits 24 [ 234.816000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 234.820000] zd1211rw 1-1:1.0: update_pwr_int() channel 11 pwr_int 0xb0 [ 234.824000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 234.828000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 256.820000] zd1211rw 1-1:1.0: set_channel() channel 11 [ 256.820000] zd1211rw 1-1:1.0: set_security() [ 256.820000] zd1211rw 1-1:1.0: set_security() .active_key = 0 [ 256.820000] zd1211rw 1-1:1.0: set_security() .level = 1 [ 256.820000] zd1211rw 1-1:1.0: set_security() .enabled = 1 [ 256.820000] zd1211rw 1-1:1.0: set_security() .encrypt = 1 [ 256.820000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 256.824000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 11 [ 256.824000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181a19 bits 24 [ 256.824000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 256.828000] zd1211rw 1-1:1.0: update_pwr_int() channel 11 pwr_int 0xb0 [ 256.832000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 256.836000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 256.836000] SoftMAC: sent association request! [ 256.840000] SoftMAC: associated! [ 262.784000] zd1211rw 1-1:1.0: iw_get_range() [ 262.784000] SoftMAC: Start scanning with channel: 1 [ 262.784000] SoftMAC: Scanning 11 channels [ 262.788000] zd1211rw 1-1:1.0: set_channel() channel 1 [ 262.788000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 262.788000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 1 [ 262.788000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181979 bits 24 [ 262.792000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 262.796000] zd1211rw 1-1:1.0: update_pwr_int() channel 1 pwr_int 0xa8 [ 262.796000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 262.800000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 262.824000] zd1211rw 1-1:1.0: set_channel() channel 2 [ 262.824000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 262.824000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 2 [ 262.824000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181989 bits 24 [ 262.828000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 262.832000] zd1211rw 1-1:1.0: update_pwr_int() channel 2 pwr_int 0xb0 [ 262.832000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 262.836000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 262.860000] zd1211rw 1-1:1.0: set_channel() channel 3 [ 262.860000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 262.860000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 3 [ 262.860000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181999 bits 24 [ 262.864000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 262.868000] zd1211rw 1-1:1.0: update_pwr_int() channel 3 pwr_int 0xb0 [ 262.868000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 262.872000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 262.896000] zd1211rw 1-1:1.0: set_channel() channel 4 [ 262.896000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 262.896000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 4 [ 262.896000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819a9 bits 24 [ 262.900000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 262.904000] zd1211rw 1-1:1.0: update_pwr_int() channel 4 pwr_int 0xb0 [ 262.904000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 262.908000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 262.932000] zd1211rw 1-1:1.0: set_channel() channel 5 [ 262.932000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 262.932000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 5 [ 262.932000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819b9 bits 24 [ 262.936000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 262.940000] zd1211rw 1-1:1.0: update_pwr_int() channel 5 pwr_int 0xa8 [ 262.940000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 262.944000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 262.968000] zd1211rw 1-1:1.0: set_channel() channel 6 [ 262.968000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 262.968000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 6 [ 262.968000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819c9 bits 24 [ 262.972000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 262.976000] zd1211rw 1-1:1.0: update_pwr_int() channel 6 pwr_int 0xb0 [ 262.976000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 262.980000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 263.004000] zd1211rw 1-1:1.0: set_channel() channel 7 [ 263.004000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 263.004000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 7 [ 263.004000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819d9 bits 24 [ 263.008000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 263.012000] zd1211rw 1-1:1.0: update_pwr_int() channel 7 pwr_int 0xb0 [ 263.012000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 263.016000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 263.040000] zd1211rw 1-1:1.0: set_channel() channel 8 [ 263.040000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 263.040000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 8 [ 263.040000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819e9 bits 24 [ 263.044000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 263.048000] zd1211rw 1-1:1.0: update_pwr_int() channel 8 pwr_int 0xb0 [ 263.048000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 263.052000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 263.076000] zd1211rw 1-1:1.0: set_channel() channel 9 [ 263.076000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 263.076000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 9 [ 263.076000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01819f9 bits 24 [ 263.080000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 263.084000] zd1211rw 1-1:1.0: update_pwr_int() channel 9 pwr_int 0xa8 [ 263.084000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 263.088000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 263.112000] zd1211rw 1-1:1.0: set_channel() channel 10 [ 263.112000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 263.112000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 10 [ 263.112000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181a09 bits 24 [ 263.116000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 263.120000] zd1211rw 1-1:1.0: update_pwr_int() channel 10 pwr_int 0xb0 [ 263.120000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 263.124000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 263.148000] zd1211rw 1-1:1.0: set_channel() channel 11 [ 263.148000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 263.148000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 11 [ 263.148000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181a19 bits 24 [ 263.152000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 263.156000] zd1211rw 1-1:1.0: update_pwr_int() channel 11 pwr_int 0xb0 [ 263.160000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 263.164000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 263.184000] SoftMAC: Scanning finished [ 263.188000] zd1211rw 1-1:1.0: set_channel() channel 11 [ 263.188000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 263.188000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 11 [ 263.188000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181a19 bits 24 [ 263.192000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 263.196000] zd1211rw 1-1:1.0: update_pwr_int() channel 11 pwr_int 0xb0 [ 263.200000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 263.204000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 268.584000] zd1211rw 1-1:1.0: set_channel() channel 11 [ 268.584000] zd1211rw 1-1:1.0: set_security() [ 268.584000] zd1211rw 1-1:1.0: set_security() .active_key = 0 [ 268.584000] zd1211rw 1-1:1.0: set_security() .level = 1 [ 268.584000] zd1211rw 1-1:1.0: set_security() .enabled = 1 [ 268.584000] zd1211rw 1-1:1.0: set_security() .encrypt = 1 [ 268.584000] zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 [ 268.584000] zd1211rw 1-1:1.0: zd_rf_set_channel() channel: 11 [ 268.584000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x0181a19 bits 24 [ 268.588000] zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x01e6666 bits 24 [ 268.592000] zd1211rw 1-1:1.0: update_pwr_int() channel 11 pwr_int 0xb0 [ 268.596000] zd1211rw 1-1:1.0: patch_cck_gain() patching value 12 [ 268.600000] zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 [ 268.600000] SoftMAC: sent association request! [ 268.604000] SoftMAC: associated!
------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
