I'm trying to set up a couple rrd data sources and graphs for a few
devices and oids that are integers, one is the off a Cisco CSS returning
the number of current connections to a given service and the other is
off a dialup device reporting how many DS0s are currently being used.
An example is below;
$ snmpget -v 2c -c xxx 10.25.254.4
1.3.6.1.4.1.2467.1.15.2.1.63.5.112.101.97.114.108
SNMPv2-SMI::enterprises.2467.1.15.2.1.63.5.112.101.97.114.108 = INTEGER: 34
$ snmpget -v 2c -c xxx 10.25.254.4
1.3.6.1.4.1.2467.1.15.2.1.63.5.112.101.97.114.108
SNMPv2-SMI::enterprises.2467.1.15.2.1.63.5.112.101.97.114.108 = INTEGER: 63
$ snmpget -v 2c -c xxx 10.25.254.4
1.3.6.1.4.1.2467.1.15.2.1.63.5.112.101.97.114.108
SNMPv2-SMI::enterprises.2467.1.15.2.1.63.5.112.101.97.114.108 = INTEGER: 57
My question is, in the PerfConf menu what should be my "Type" setting
what should be my format sting?
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
