It's been about a year now and I figured I'd send out a little update for
For density and cost considerations, we ended up going with a custom built
Supermicro "double sided storage" chassis, which can hold 72 drives in 4U. We
initially deployed 10 raidz2 vdevs for about 40TB usable - the remaining 12
drive bays were used for cache, zil, spares. We have been very happy with this
set up and are about to double the capacity with the JBOD version of the same
I went with 3 LSI 9211-8i controllers to match the Supermicro's 3 backplanes.
In the testing phase, we evaluated Solaris 11 and Nexenta - ultimately we went
with Nexenta due to the set of tools pre-written, although performance was
slightly better on Solaris.
On Jul 3, 2012, at 1:49 PM, Anh Quach <a...@blackandcode.com> wrote:
> Thanks Richard and Edmund for the input.
> Looking at the DL380 now...
> On Jul 2, 2012, at 7:57 PM, Richard Elling wrote:
>> On Jul 2, 2012, at 2:40 PM, Edmund White wrote:
>>> This depends upon what you want to do. I've used G6 and G7 ProLiants
>>> extensively in ZFS deployments (Nexenta, mostly). I'm assuming you'd be
>>> using an external JBOD enclosure?
>> When I was at Nexenta, we qualed the DL380 G7, D2600, and D2700.
>> These are some of the better boxes on the market.
>>> All works well. I disable the onboard Smart Array P410 RAID controller and
>>> replace it with an LSI SAS HBA. If using internal disks, I'll use the
>>> 9211-8i. If external, the 9205-8e. Or sometimes, both.
>> FYI, HP also sells an 8-port IT-style HBA (SC-08Ge), but it is hard to
>> with their configurators. There might be a more modern equivalent cleverly
>> hidden somewhere difficult to find.
>> -- richard
>> ZFS Performance and Training
>> zfs-discuss mailing list
zfs-discuss mailing list