Speaking as someone who has run digital modes going back far enough to
have used a physical teletype machine with an ST-6....
I wouldn't bother with PTT. Sure, it seems right, but unless you're
trying to run AMTOR (which has an extremely short TX time), I'd just run
VOX. It works fine.
The audio signal from the soundcard, generated by the program is the PTT.
73 -- Lynn
On 7/22/2017 11:30 AM, Tommy wrote:
I have tried every way possible to this point. When I have CAT
selected I get a green test cat button, pushing it does nothing but turn
it white then after a few seconds it goes to green. Pushing test PTT
keys the rig, the button turns RED and I see no signal going out of the
radio. Choosing the VOX setting does nothing apparently. PTT is grayed
out and the test button does nothing and stays white. My CAT controls
are set like yours are.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com