On Wed, 13 Apr 2022, Marius wrote:
Date: Wed, 13 Apr 2022 17:51:10 +0200
From: Marius <mar...@mastercut.co.za>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>,
Peter C. Wallace <p...@mesanet.com>
Subject: Re: [Emc-users] Looking for 7i92 bit file
Your forum page shows 4 axis using stepgens on DB-25 pins
2,3,4,5,6,7,8,9, the 7i92_5ABOB config can configure these on the
pins.
what is the exact issue you have?
I need to assign as follows:
X to 2/3
X Slave to 4/5
Y to 6/7
A to 8/9
pncconf doesn't support a configuration missing Z so you
will probably need make a XXYZA configuration assigned:
Stepgen 0 X
Stepgen 2 Y
Stepgen 3 A
Stepgen 1 X2
Stepgen 4 Z
and then delete all the Z axis stuff in the hal and ini files
Does any of the numbers on the left side of the PnCConf dialog correspond
to the stepgen numbers?
Yes, the numbers to the left of the stepgen function selector are the
stepgen number
I cannot get this result at all. With 7i92_5ABOBx2D I do not get 8/9
assigned at all. It jumps to the next port and then it will put stepgen
4 on the second port. You can see that from my output that I posted on
the forum. I redid the config in many ways but I cannot force this
allocation at all.
On 2022/04/12 16:35, Peter C. Wallace wrote:
On Tue, 12 Apr 2022, Marius wrote:
Date: Tue, 12 Apr 2022 16:22:37 +0200
From: Marius <mar...@mastercut.co.za>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] Looking for 7i92 bit file
I attached a picture. Don't remember if that can be done.
This is the config I need but I will be damned if I can get
PnCConf to do this. Maybe I dont understand the GUI where the pin
allocations happen that well. If only they would show the I/O
number correctly somewhere. There are some numbers on the left
side but they make no sense.
The pinout is determined by the firmware so many
parallel port type 7I92 bitfiles will do
For example 7i92_5ABOBx2D.bit firmware will work here
You associate stepgen numbers to Axis in pncconf
The firmware maps those numbered stepgens to
physical pins
XSTEP - 2 : XDIR -3
X2STEP - 4 : X2DIR - 5
YSTEP - 6 : YDIR - 7
NO Z (or 16 and 17)
ASTEP - 8 : ADIR 9
On 2022/04/12 15:50, andy pugh wrote:
On Tue, 12 Apr 2022 at 13:48, Marius <mar...@mastercut.co.za>
wrote:
The config I have to replicate is this.
Seems to be coming through blank.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
