I have some new information regarding my problem ( I couldn't find any mention of a problem like mine) so I fiddled some more. I plugged the S-Video to Composite adapter and I get a picture....only its black and white. I read that the composite and s-video were hooked up to the same place in the card so if the s-video works (even in black and white) then I assume the composite should work. If I'm right about composite and s-video being wired into the same place then my card dongle is bad (in which case how do I fix the B&W problem). If I'm wrong then I'm still hoping you all might have some clue.
Nathan. > > From: <[EMAIL PROTECTED]> > Date: 2004/12/22 Wed PM 05:19:52 EST > To: <[email protected]> > Subject: [ivtv-devel] 350 composite out problem > > i finally got to the point that I was happy with my setup and ready to hook > it up to the livingroom tv (the wife even asked for it). I hooked everything > up and the 350 TV out stoped working. > I think the problem lies in S-Video out. I was thinking ahead and I plugged > in the S-Video from the cable box to the 350. The mistake I made was that I > plugged the output from the cable box into the OUTPUT of the 350! Odviously > this was a mistake shich I changed (plugged it ointo the input instead. > But the Composite hasn't worked since. I even pulled in the tv and monitor I > was using to test woth, but no go. I went back through Jarod's information > again, but although each command reports success nothing is happening. > > I think I changed something, but don'e knmow what. My only thought is that I > made the card think the S-Video was the new output, and it won't switch back. > The command below shows this: > > ioctl: VIDIOC_ENUMOUTPUT > Output : 0 > Name : S-Video + Composite > Type : 0x00000002 > Audioset: 0x00000001 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > > It makes me think the output has changed from Composite to S-Video. > > Here is the command: > > [EMAIL PROTECTED] mythtv]# /usr/bin/ivtvctl -a > ioctl: IVTV_IOC_G_CODEC > Codec parameters > aspect : 2 > audio : 0x00e9 > bframes : 3 > bitrate_mode: 0 > bitrate : 8000000 > bitrate_peak: 9600000 > dnr_mode : 0 > dnr_spatial : 0 > dnr_temporal: 0 > dnr_type : 0 > framerate : 0 > framespergop: 15 > gop_closure : 1 > pulldown : 0 > stream_type : 0 > ioctl: VIDIOC_G_FMT > Type : Video Capture > Width : 720 > Height : 480 > ioctl: VIDIOC_QUERYCAP > Driver name : ivtv > Card type : Vanilla iTVC15 card > Bus info : 0 > Driver version: 512 > Capabilities : 0x01070033 > ioctl: VIDIOC_ENUMINPUT > Input : 0 > Name : Composite 0 > Type : 0x00000002 > Audioset: 0x00000003 > Tuner : 0x00000000 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > Status : 0 > > Input : 1 > Name : Composite 1 > Type : 0x00000002 > Audioset: 0x00000003 > Tuner : 0x00000000 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > Status : 0 > > Input : 2 > Name : Composite 2 > Type : 0x00000002 > Audioset: 0x00000003 > Tuner : 0x00000000 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > Status : 0 > > Input : 3 > Name : Composite 3 > Type : 0x00000002 > Audioset: 0x00000003 > Tuner : 0x00000000 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > Status : 0 > > Input : 4 > Name : Tuner 0 > Type : 0x00000001 > Audioset: 0x00000003 > Tuner : 0x00000000 > Standard: 0x0000000000003000 ( NTSC ) > Status : 0 > > Input : 5 > Name : Composite 4 > Type : 0x00000002 > Audioset: 0x00000003 > Tuner : 0x00000000 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > Status : 0 > > Input : 6 > Name : S-Video 0 > Type : 0x00000002 > Audioset: 0x00000003 > Tuner : 0x00000000 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > Status : 0 > > Input : 7 > Name : S-Video 1 > Type : 0x00000002 > Audioset: 0x00000003 > Tuner : 0x00000000 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > Status : 0 > > Input : 8 > Name : S-Video 2 > Type : 0x00000002 > Audioset: 0x00000003 > Tuner : 0x00000000 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > Status : 0 > > Input : 9 > Name : S-Video 3 > Type : 0x00000002 > Audioset: 0x00000003 > Tuner : 0x00000000 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > Status : 0 > ioctl: VIDIOC_G_INPUT > Input = 4 > ioctl: VIDIOC_ENUMOUTPUT > Output : 0 > Name : S-Video + Composite > Type : 0x00000002 > Audioset: 0x00000001 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > > Output : 1 > Name : Composite > Type : 0x00000002 > Audioset: 0x00000001 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > > Output : 2 > Name : S-Video > Type : 0x00000002 > Audioset: 0x00000001 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > > Output : 3 > Name : RGB > Type : 0x00000002 > Audioset: 0x00000001 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > > Output : 4 > Name : YUV C > Type : 0x00000002 > Audioset: 0x00000001 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > > Output : 5 > Name : YUV V > Type : 0x00000002 > Audioset: 0x00000001 > Standard: 0x00000000007F3FFF ( PAL NTSC SECAM ) > ioctl: VIDIOC_G_OUTPUT > Output = 0 > ioctl: VIDIOC_ENUMAUDIO > Input : 0 > Name : Tuner Audio In > > Input : 1 > Name : Audio Line In > ioctl: VIDIOC_G_AUDIO > Input = 0: Tuner Audio In > ioctl: VIDIOC_G_FREQUENCY > Frequency = 10676 > ioctl: VIDIOC_ENUMSTD > index : 0 > ID : 0x0000000000003000 > Name : NTSC > Frame period: 1001/30000 > Frame lines : 525 > > index : 1 > ID : 0x00000000000000FF > Name : PAL > Frame period: 1/25 > Frame lines : 625 > > index : 2 > ID : 0x00000000007F0000 > Name : SECAM > Frame period: 1/25 > Frame lines : 625 > ioctl: VIDIOC_G_STD > Standard = 0x00003000 > ioctl: VIDIOC_QUERYCTRL > Brightness = 127 > Contrast = 63 > Saturation = 63 > Hue = 0 > Volume = 58880 > Mute = 0 > > > Here is my message output: > > [EMAIL PROTECTED] log]# /bin/dmesg | grep ivtv > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.2.0 (rc2z) loading > ivtv: Linux version: 2.6.8-1.521 686 REGPARM 4KSTACKS gcc-3.3 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 350 card > ivtv: Found an iTVC15 based chip > ivtv: XXX PCI device: 0x7190 vendor: 0x8086 > ivtv: i2c attach [client=tveeprom[0],ok] > ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x00a93493, > Revision 0x00000001 > ivtv: NTSC tuner detected > ivtv: Radio detected > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > ivtv: i2c attach [client=saa7115[0],ok] > ivtv: i2c attach [client=saa7127[0],ok] > ivtv: i2c attach [client=MSP3448W-A2,ok] > ivtv: Encoder revision: 0x02040024 > ivtv: Encoder Firmware is buggy, use version 0x02040011 > ivtv: Decoder revision: 0x02020023 > ivtv: Configuring WinTV PVR 350 card with 9 streams > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 1 using 8 131072 byte buffers 1048576 kbytes total > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 3 using 16 131072 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total > ivtv: Registered v4l2 device, streamtype 5 minor 16 > ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total > ivtv: Registered v4l2 device, streamtype 6 minor 228 > ivtv: Create stream 7 > ivtv: Registered v4l2 device, streamtype 7 minor 232 > ivtv: Create DMA stream 8 using 16 65536 byte buffers 1048576 kbytes total > ivtv: Registered v4l2 device, streamtype 8 minor 48 > ivtv: ivtv_enc_thread: pid = 2058, itv = 0x12c6eaa0 > ivtv: Setting Tuner 2 > ivtv: ivtv_dec_thread: pid = 2059, itv = 0x12c6eaa0 > tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv > i2c driver #0 > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to NTSC. > ivtv: Initialized WinTV PVR 350, card #0 > ivtv: ==================== END INIT IVTV ==================== > ivtv: i2c attach [client=Hauppauge IR,ok] > ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0) > ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has > 1704960 bytes. > ivtv-osd: screen coords: [0 0] -> [720 480] > ivtv-osd: original global alpha = 208 > ivtv-osd: current OSD state = 39 > ivtv-osd: new global alpha = 208 (1 255 0) > ivtv-osd: framebuffer at 0xe5510000, mapped to 0x13a23000, size 1350k > ivtv-osd: mode is 720x480x32, linelength=2880 > ivtv-osd: fb0: iTVC15 TV out frame buffer device > > > Any thoughts? > I'm at a loss. If the card hasn't switched to S-Voideo out then all I can > think of is that I fried some part of the card which isn't reporting back an > error. > > Thanks for your help. > > Nathan. > > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://productguide.itmanagersjournal.com/ > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
