Patrick,
this is done on the switch, if it supports it.
My switches (HP ProCurve) won't let me sample any more often than every
20st packet :/
regards,
johannes

Am Montag, den 03.11.2008, 08:18 -0800 schrieb Patrick Topping:
> Gerhard,
> 
> I am suffering from the same issue....  Where did you make the change
> for this --> I've configured the rate to 1 on all ports. 
> 
> Thanks in advance.
> 
> -Patrick
> 
> --------------------------
> 
> 
> Gerhard Mourani wrote: 
> > Hello Luca,
> > 
> >  > How did you configure sflow in your foundry?
> > I've configured the rate to 1 on all ports. After doing this, I can see 
> > that captured informations are better accurate but not 100%. For 
> > example, if I transfers 100 MB now, I will see around 90 MB. I think I 
> > cannot do better than that because it use sampling as you said.
> > 
> > Gerhard,
> > 
> > Luca Deri wrote:
> >   
> > > Gerhard
> > > sflow uses sampling. hence if you send let's say 100 you will see 1
> > > using sflow. How did you configure sflow in your foundry?
> > > 
> > > Luca
> > > 
> > > On Oct 31, 2008, at 7:33 PM, Gerhard Mourani wrote:
> > > 
> > >   
> > >     
> > > > Hello List,
> > > > 
> > > > I've activated the sFlow plugin into my ntop version 3.3.8 to capture
> > > > and display sFlow data coming from my "Foundry Network FastIron Edge
> > > > 9604" model. If I check inside the plugin page of sFlow about 'sFlow
> > > > Interface Statistics' everything are correct and reported data
> > > > transfers
> > > > for 'Administrative' or 'Operational' status are ok. But now my
> > > > problem
> > > > is when I check inside the ntop web interface and especially about
> > > > collected data, here the problem is that returned informations about
> > > > amount of data are wrong, I mean the amount of data doesn't correspond
> > > > to what have really been transfered. So for example if I transfer 135
> > > > MBytes I can only see 295.0 KBytes in ntop. Someone know how to fix
> > > > this?
> > > > 
> > > > Thanks for your helps,
> > > > Gerhard,
> > > > _______________________________________________
> > > > Ntop mailing list
> > > > Ntop@unipi.it
> > > > http://listgateway.unipi.it/mailman/listinfo/ntop
> > > >     
> > > >       
> > > _______________________________________________
> > > Ntop mailing list
> > > Ntop@unipi.it
> > > http://listgateway.unipi.it/mailman/listinfo/ntop
> > >   
> > >     
> > _______________________________________________
> > Ntop mailing list
> > Ntop@unipi.it
> > http://listgateway.unipi.it/mailman/listinfo/ntop
> > 
> > 
> >   
> _______________________________________________
> Ntop mailing list
> Ntop@unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
Ntop@unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop

Reply via email to