hummm nice check Telnet Com Port Control is defined in RFC2217. Refer to the Help Guide Com Port Control Compliance at http://www.precidia.com/ products/documentation.html for a list of the Com Port Control commands supported by the Ether232Plus.
page 28 of your datasheet i must test, but i think you can use it with onewire, telnet with serial is the rfc2217 check that baud rate and others events are on the same port of data information (RX/TX) you only need one tcp port 2011/6/6 Markus Gaugusch <[email protected]>: > On Jun 6, Roberto Spadim <[email protected]> wrote: > >> hum, you must check if your serial-ethernet allow change o baud rate, > Yes, I can change baud rate via telnet on the box. The serial data is > passed via another port (e.g. 1000, freely defined). > >> rts, cts, etc... using only one port, this is the 'telnet' protocol > Those pins are unused in my 1wire adaptor (only power stealing). So I > really only need RX/TX > >> in raw mode for example, you will never change baud rate, only >> changing parameters of box, or a file... with 'telnet' protocol you >> can change it without disconnecting and changing a file or a >> webpage... > > >> do you have the manual or datashhet of your serial-ethertnet box? > > Yes, this one: > http://www.precidia.com/downloads/user_guides/Ether232PlusUser_02-CML000057.pdf > (I have an Ether232 Solo, but it seems to be identical in firmware) > > thanks! > Markus > > -- > __________________ /"\ > Markus Gaugusch \ / ASCII Ribbon Campaign > markus(at)gaugusch.at X Against HTML Mail > / \ > > ------------------------------------------------------------------------------ > Simplify data backup and recovery for your virtual environment with vRanger. > Installation's a snap, and flexible recovery options mean your data is safe, > secure and there when you need it. Discover what all the cheering's about. > Get your free trial download today. > http://p.sf.net/sfu/quest-dev2dev2 > _______________________________________________ > Owfs-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/owfs-developers > > -- Roberto Spadim Spadim Technology / SPAEmpresarial ------------------------------------------------------------------------------ EditLive Enterprise is the world's most technically advanced content authoring tool. Experience the power of Track Changes, Inline Image Editing and ensure content is compliant with Accessibility Checking. http://p.sf.net/sfu/ephox-dev2dev _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
