I have a manual chair with ez lock

> On 02/19/2024 5:53 PM EST wheelch...@aol.com <wheelch...@aol.com> wrote:
>  
>  
>  
> Greetings,
> I've never seen a manual wheelchair, using a single post on an EZ Lock 
> System, for driving or riding.   I have seen double wheel securement for 
> riding wheelchairs.  The design of an EZ lock system was designed for drivers 
> and riders using powered chairs.  I would consider going directly to EZ Lock 
> Securement and getting an answer directly from them rather than a dealer.
> Best Wishes.
>  
>  
> On Monday, February 19, 2024 at 03:33:35 PM CST, SHIRLEY BELL 
> <sbell...@cox.net> wrote:
>  
>  
> Hi Shelly, are you in the new England area? 
> 
> > On 02/19/2024 2:40 PM EST Shelly Kerchner <shelly.kerch...@yahoo.com> wrote:
> >  
> >  
> > hi to all ! Past two years been having health issues/skin breakdown, 
> > rotator cuff surgery, recovery, etc. so I have been absent from this group! 
> > I hope everyone is well! 
> >  
> > Currently, I’m driving my motorized chair using the easy lock system. 
> >  
> > I want to be able to use my manual chair and was advised that I would need 
> > the new Q straint lock down system ( state agreed to install and pay for 
> > the pin for my manual chair. ) the reason being because the easy lock does 
> > not make a pin for my manual chair.
> >  
> > One last thought, the salesman/company who recommended the new lock down 
> > system at First told me it be no problem for me to use my current motorized 
> > chair with the new system( qstraint) 
> >  
> > Then weeks later flipped on me and said because of liability the only chair 
> > I could drive from would be my manual chair, and could no longer  use the 
> > motorized chair……….
> >  
> > ( many months ago also he told me this is just between you and I, but we 
> > looked at the pins and there’s no difference between the pens except colors 
> > and the only trouble I may run into is if I had an accident and tried to 
> > come back on the company who made the pin because I had did not have the 
> > pin the manufacturer requires us to use.
> >  
> > It’s a cumbersome process to navigate so I would appreciate any one willing 
> > to share their experience and would appreciate some assistance!
> >  
> > Thanks ahead of time !!
> >  
> > Shelly Kerchner
> >  
> > 
> > 
> > Sent from Yahoo Mail for iPad 
> > https://mail.onelink.me/107872968?pid=nativeplacement&c=Global_Acquisition_YMktg_315_Internal_EmailSignature&af_sub1=Acquisition&af_sub2=Global_YMktg&af_sub3=&af_sub4=100000604&af_sub5=EmailSignature__Static_
> > 
> 

Reply via email to