I've been looking at phillystran for many years now, but never implemented it. I've used 3/16 EHS with associated hardware. I too, have issues with noise.
Any others out there who have, and can give any ideas on how to use it for guying a tower? Hardware used, hints and kinks? Or are there docs or web sites that can be referred to? TIA, Don, KD9PT ----- Original Message ----- From: Nate Duehr To: Repeater-Builder@yahoogroups.com Sent: Thursday, March 12, 2009 7:18 PM Subject: RE: [Repeater-Builder] Re: Quieting duplex noise from a tower This fixes the RF problem, but creates a new one. the guy anchors can now explode in a direct lightning strike if your shorting wires don't give up first. if the lightning thinks the path down the guy wire looks "better" than others. Nate WY0X From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of kerinvale Sent: Thursday, March 12, 2009 4:28 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Re: Quieting duplex noise from a tower
