Lerma and I are going to man an Elecraft booth the Hamcom convention (
http://www.hamcom.org/ ) in Arlington, TX, this weekend (Fri-Sat, 6/18-19). If
any of you would like to hang out at the booth showing off your rig and
meeting current and prospective Elecrafters, please email me
( [EMAIL
I just noticed the K2 reviews at eHam are getting a little old. If you are a
new (or old!) K2 or K2/100 owner please feel free to post your thoughts at:
http://www.eham.net/reviews/detail/2357
73, Eric WA6HHQ
___
Elecraft mailing list
Post to:
Just a short note to say that we are now stocking the FingerDimple knob
spinner attachment for the K1 and K2 from K8FF. It can now be ordered via the
Elecraft web order form.
See: http://www.elecraft.com/accessories/fingerdimple.htm
73, Eric WA6HHQ
Hi Paul,
We also offer the K60XV internal transverter interface option for the K2. It
has a separate low level output for the driving transverters and automatically
switches to that output from the K2's HF output when you select a transverter
band.
To correct for the 100 Hz offset go into
Correction - The last 'l' in 'html' was dropped from the original link:
http://www.elecraft.com/Apps/K2info.html
Eric
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
Original Message
Subject: RU-QRP'edition
Date: Tue, 13 Jul 2004 19:26:21 +0400
From: Oleg V. Borodin [EMAIL PROTECTED]
Organization: RV3GM
My dear friends!
I'm glad to inform about the RU-QRP Club expedition devoted to
2'nd Club Anniversary. July 16 to 21 we will operate from
you wrote:
Am Presently using the k2 proset but my audio reports are less than
flattering ..John K1GUN
Hi John,
If are getting poor audio reports with the Proset-K2 this indicates that your
transmit BFO settings (BF1t) for both USB and LSB are not optimally adjusted.
The default BF1t
We have just discovered that we had a server problem and our parts
request email address, [EMAIL PROTECTED], was not properly forwarding
requests to us from 11:30 AM California time yesterday, Aug. 4th,
through 10:12 AM today, Aug. 5th.
You may have received an automatic email confirmation,
41 SMT related posts in the last couple of days. Wow! Looks like we've
beaten it to death.
Time to let this thread rest. :-)
73, Eric WA6HHQ
Elecraft List moderator
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
I've just added a new Tech notes article on our web page:
'K2MC'
A Mobile computer for you K2
by Jim Brown, K5JAZ
Jim has done a great job designing a small computer for use with his K2.
This article includes details on how it is all put together.
See the Tech Notes link at
As a thank you to our great customers, we will be offering 33% (1/3 off)
discounts on our internal ATUs and Desk Microphones (when purchased with
a K1, K2 or KX1) at the ARRL S/W Convention this weekend.
To make this more exciting, we have decided to make this offer to
-everyone- purchasing a
Gary (AB7MY) and I will be manning the Elecraft booth at the ARRL
Southwest Convention in Phoenix this weekend, Aug. 27-29th. Please come
by to visit and see out latest offerings and show specials!
Also, if you are interested in meeting interested people, showing off
your building skills or
I forgot to mention in my last post that we are also including a free
Elecraft engraved pocket knife with all orders of $150 or more received
between today, 8/25, and Sept. 30th (or when we run out of knives :-)
One knife per customer as we only have a limited quantity. (We will
include these
Hi Roy,
This is not true. The K2's internal ALC is ALWAYS active on PTT closure,
regardless of where the K2 meter is set.
There is no issue with linearity or overdriving an external linear. If
anything, we are conservative after power up or a band change and err
initially on the low side at
Hi David,
I'm out of town this weekend. (I'm writing this email on my Treo 600
phone/pda.) I'll try to fix this problem when I get on my main PC at work
tomorrow.
It may take some detective work as many people subscribe via an email alias, so
their physical address doesn't show up on my
Check to make sure you do not have the K2 menu item OPT = 'Batt' mode.
That mode overrides the bar mode and places it in dot mode.
You want OPT = Perf.
73, Eric
Henning V. Mikkelsen wrote:
Hello all
I have a peculiar failure on the LED bar. It is only showing dot
even when it is put in
For those of you like me, who use your K1 and K2s heavily and want to
touch up those 'love scratches' ;-) , we have just added gray matching
touch up paint for the K1 and K2 to our spare parts order form at:
http://www.elecraft.com/order_form_parts.htm
It took some work with our powder coat
Just in case you have been procrastinating :-) , here's a reminder that
our summer specials end next thursday, Sept. 30.
73, Eric WA6HHQ
==
Eric Swartz wrote:
As a thank you to our great customers, we will be offering 33% (1/3 off)
discounts on our internal ATUs and Desk Microphones
Hi Don,
See http://www.elecraft.com/images/KRC2config2.JPG
This picture is of my last revision of the KRC2 config program. I'm now
adding at cutsomer request the ability to save several KRC2 mapping
setups to both quick memories and to a file, along with the ability to
download complete
Hi Tony,
Rob Sherwood has posted updated IMD test numbers for the K2 on his web
page. We now are listed by Rob in the very top tier of rigs for third
order IMD at even a 2 kHz signal spacing. He now lists our IMDDR3 at 2
kHz spacing as 80 dB, which is 11 dB better than he originally posted.
We are pleased to announce that Elecraft is now offering the Buddipole
and Buddistick portable antennas from W3FF antennas. (These will replace
the Superantennas that we previously carried.)
I've only had time to add them to the Elecraft order form at
http://www.elecraft.com . I will be
We have just added the new ARRL release of Low Power Communication --
The Art and Science of QRP by Richard Arland, K7SZ to our Radio Books
page at http://www.elecraft.com/books/books.htm
This is the latest edition of Rich's great book on QRP operating. It
features a number of new chapters
Yes. Its on our manual download page at the bottom.
See: http://www.elecraft.com/manual/KIO2%20Pgmrs%20Ref%20rev%20E.pdf
73, Eric WA6HHQ
---
Barry, Steve wrote:
Is there a complete, in one file, list of all K2 commands and queries
including the PA, SSB, DSP, etc. modules?
Dan,
If you can't get through to Heil we will certaily handle it. Contact
Scott at [EMAIL PROTECTED] and he will get you a replacement and have
you send the old one back to him for evaluation.
73, Eric
--
Dan Barker wrote:
Well, the Heil Hospital page is for returning (at $12 or more)
Hi Johnny,
He must be dreaming :-) That would be impossible since a K3 prototype
does not exist. And I would know. Also, we do not have any operations in
Singapore or anywhere else in Asia..
We are always working on potential new products in the lab, but I
certainly do not see another main
Hi Fred,
The K2 has this delay function built into its firmware. Look up '8R
Hold' in the current manual. Once enabled in the menu it will keep 8R
(and the Keyout line on the KPA100) keyed as long as the keying hang
time is set for.
73, Eric WA6HHQ
wayne burdick wrote:
I have the
I've noticed a pleasant increase in orders for K1, K2, KX1 radios and
accessories recently from Europe. Much more so than I usually see
during this time of year. I guess we must be doing something right, or
we're getting a little help from somewhere.. :-)
Can anyone tell me if there has been a
We have just uploaded a new Tech Notes article to the Elecraft web site
titled:
The SP2 External Speaker Project for your K2, By Dave White, VE6DRW
Thanks Dave!
73, Eric WA6HHQ
http://www.elecraft.com
___
Elecraft mailing list
Post to:
We have just added a new article to our Tech Notes page at
http://www.elecraft.com
A 100W Z-Match for 160m - 10m, By Geoff Cottrell, G3XGC
Geoff includes pictures and schematics of his cool home-brew 100W
Z-Match Tuner project.
73, Eric WA6HHQ
We've just added two new books to the Elecraft Radio Book page at:
http://www.elecraft.com/books/books.htm
---
Up Two, Adventures of a DXpeditioner by Roger Western, G3SXW
Are you a DX'er? Have you longed to be on the other side of the
pile-ups? Do you dream of taking a rig to exotic
For all of you last minute shoppers (like me :-) , to receive your
Elecraft order (U.S. destinations) by Dec. 24th, please order by:
Wed. Dec 15th UPS Ground, USPS Priority Mail
Mon. Dec 20th UPS 3 Day (Orange)
Tues. Dec 21st UPS 2 Day (Blue), Fed Ex 2nd Day
Wed. Dec 22nd UPS 1 Day
Original Message
Subject: [NCCC] T32
Date: Wed, 15 Dec 2004 22:59:57 +
From: Alan Eshleman [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Here's the T32 report:
Doug (N6TQS) and I with our respective XYLs arrived on Christmas Island
on December 7. Christmas Island is a 5-hour
Interesting topic, but we're overloading the list with way too many
postings.
Let's let these threads rest for now :-)
73, Eric WA6HHQ
List Moderator
Brian Wruble wrote:
Guys, Steve was kidding, and I took the bait. My face continues to redden
as the thread goes on. In my own defense ---
Elecraft will be closed from this Friday, 12/24, through Friday 12/31
for a much needed rest.
Please place orders before 12/24 if you wish to receive them before the
end of this month.
Our on line order page and tech support ( [EMAIL PROTECTED] and
[EMAIL PROTECTED] ) will still be active
We received our latest shipment of HEXKEYs today and we are now shipping
new orders from stock :-)
All remaining backlog orders will be shipped as of today.
For more information on the Elecraft Edition HEXKEY, see:
http://www.elecraft.com/hexkey/elecraft_hexkey.htm
73, Eric WA6HHQ
The K2/100 already includes a high voltage output keying line for linear
amplifiers on its KPA100 back panel. It can handle up to 200V and 1A
max. Most amps with -positive- keying voltages can be T/R keyed from the
K2/100.
I think the SB-220 uses a positive voltage so it should work.
The few
Correction - The correct link for the partial kit of parts to build this
circuit is to our spare parts order
page: http://www.elecraft.com/order_form_parts.htm
Go to the K2 section and order the AMPKEYKIT.
73, Eric WA6HHQ
==
___
Elecraft
I've just created a new category for the Elecraft HexKey on the eHam
reviews section. Feel free to post! :-)
See:
http://www.eham.net/reviews/detail/4843
73, Eric
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to
Hi Michael,
Try the phone number and email listed below. We just received an email
from them noting that they had changed email addresses.
[EMAIL PROTECTED]
(920) 566-1900
73, Eric WA6HHQ
From: Ellen Melland [mailto:[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: shirts
Dear Lisa,
I just noticed the reviews on eHam for the K2/100 category are getting a
little old. If you have a minute (and a K2/100) feel free to post your
thoughts there. The direct link is:
http://www.eham.net/reviews/detail/2357
73, Eric
___
Elecraft mailing
I've uploaded our new KRC2 download utility for Windows and the latest
KRC2 firmware hex files for the V1.2 KRC2 and KRC2ACC code to the
Elecraft web page.
See http://www.elecraft.com/K2_Manual_Download_Page.htm#krc2
73,
Eric
___
Elecraft mailing
As a follow up to my post on the KRC2 windows download utility and new
KRC2 f/w, now that I'm back on s/w I am also finishing up the long (and
patiently) awaited KRC2 configuration utility this week.
The download code is common between the new f/w download utility and the
upcoming KRC2
8.84 kHz os OK.
73, Eric WA6HHQ
Glenn McNeil wrote:
Hi Group,
I'm just at the Test and Alignment Part II Stage on my Second K2.
Up until now, all smooth sailing.
On doing the PLL Ref Oscillator Test however, I come up with 12.100.48
kHz for the high frequency and 12.091.64 for the
8.84 kHz is OK.
73, Eric WA6HHQ
Glenn McNeil wrote:
Hi Group,
I'm just at the Test and Alignment Part II Stage on my Second K2.
Up until now, all smooth sailing.
On doing the PLL Ref Oscillator Test however, I come up with 12.100.48
kHz for the high frequency and 12.091.64 for the
Hi Brendan,
A couple of questions:
1. Were you using the new V1.2 download hex files from the web page? If
not, and you were using earlier ones sent out by Jack, they will have
too many records and can cause this error.
(If the earlier hex files, with too many records, were sent by a dumb
I've uploaded a new version (1.1) of the KRC2 download utility to the
Elecraft web page. This version includes an option to disable the
requirement for KRC2 ACK's on each download line. It may solve the
download problem owners of earlier KRC2s were seeing.
See
Hi Don,
A PLL range of 9.47 kHz is OK. 8.8 kHz is the minimum range.
73, Eric WA6HHQ
Donald K. Duncan wrote:
Pardon the earlier malformed subject...
Hi all -
I'm working on K2 #4607. I'm to the point of Alignment and Test,
Part II. A couple of problems have come up.
1) The K2 is
Folks,
Top posting is officially OK here. It is by far the fastest way (with
fewest scrolling key-strokes) for me to read the high volume of emails I
receive daily from the Elecraft list. Bottom posting is a killer for me.
(I'm using Mozilla Thunderbird email..)
Please, lets kill this
Original Message
Subject: KK7P Web Pages Moved
Date: Sun, 09 Jan 2005 17:18:09 -0800
From: Lyle Johnson [EMAIL PROTECTED]
To: Eric Swartz [EMAIL PROTECTED]
Hello Eric!
I just moved my website stuff from my old ISP to a new one.
Please replace any linked references on the
Hi Marcus,
The XV50 is relay T/R switched and like most transverters can not handle
a T/R setting that allows hearing between letters at 20 WPM. I suggest
setting the K2 T/R time a little longer.
73, Eric WA6HHQ
Marcus Busch [DL1EKC] wrote:
Hi Elecrafters,
just finished my XV50 and
I've just added the T1 manual, FAQ (frequently asked questions) and Data
Sheet to our the T1 page at:
http://www.elecraft.com/T1/T1.htm
73, Eric WA6HHQ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
I've just uploaded a new assembled T1 interior picture to the T1 page at:
http://www.elecraft.com/T1/T1.htm
73, Eric WA6HHQ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
That should not be a problem. Trademarks are product category specific.
A 'K2' trademark for cattle will not be in the same category as the 'K2'
tm for Radio Equipment. :-)
73, Eric WA6HHQ
Kirby Nesbitt wrote:
Actually.. you will have an issue. K2 is an official registered
brand used
We designed the KDSP2 to improve ultimate SSB filter ultimate rejection
in the K2.
The KDSP2, with its brick wall SSB filter settings, when cascaded after
the KSB2 filter, totally eliminates any residual leakage from strong
signals outside the passband. It also tightens the net filter shape
115dB. Is this a result of the KSB2 being outboard?
Larry N8LP
Eric Swartz - WA6HHQ, Elecraft wrote:
We designed the KDSP2 to improve ultimate SSB filter ultimate
rejection in the K2.
The KDSP2, with its brick wall SSB filter settings, when cascaded
after the KSB2 filter, totally eliminates
Oops! - I missed one point in your email. Yes, the above board mounting
of the KSB2 reduces ultimate rejection due to its longer ground return
paths. But as you noted, with 80 dB of ultimate rejection, following it
with the KDSP2 kills any residual blow by.
A number of the $3K and above DSP
Sounds like you are looking at the qth.net Elecraft archive. We have two
different archives.
The one on qth.net is -not- searchable.
The one on ac6rm.net is more advanced and -is- searchable by keyword.
It also displays each day of postings by subject in a web format for
easy daily scanning.
ELECRAFT email LIST GUIDELINES
For those of you who are new to the list, (and for those of us who have
rapidly failing memories..), here is a quick list of things to remember when
posting to this list. Please save this for future reference.
The most important thing to remember is that this is
From the OPDX Bulletin #700:
ZB2, GIBRALTAR. Tom/GM4FDM and Ronald/PA3EWP will be staying in the
Caleta Hotel in Gibraltar from March 21-28th. They will operate as
ZB2/GM4FDM and ZB2/PA3EWP, respectively. Plans are to have antennas for
80-10 meters and possibly 160 meters. Look for activity on
Hi Adi,
There must be something wrong with your K2 or measurement set up. As can be seen
from the phase noise plot on our web page (under radio comparisons) the K2 TX
signal is better than -130 dBc when you get 10-20 kHz away from the carrier.
Also, what b/w and span were you using on your
for Your answer.
The measurment setup is :
VBW 100Hz
RBW 10kHz
Span 500KHz
Any ideas what went wrong
Adi
- Original Message -
From: Eric Swartz - WA6HHQ, Elecraft [EMAIL PROTECTED]
To: S55M [EMAIL PROTECTED]
Cc: Elecraft elecraft@mailman.qth.net
Sent: Thursday, March 10, 2005 6:53
From the OPDX bulletin #701:
8R, GUYANA. Craig, AH8DX, has made an early announcement that he will
be active as 8R1EA in the CQ WW DX SSB Contest (October 29-30th) as a
Single-Op/All-Band/High-Power entry. QSL via AH8DX. His radio will be
an Elecraft K2/100 x 2.
For inquiring minds:
We started shipping the T1-K ATU kit and its assembled T1-FT817 adapter cable
this week. Have fun!
73, Eric WA6HHQ
http://www.elecraft.com
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to
We've just uploaded the latest T1 Manuals on the Manual Download page at
http://www.elecraft.com. These should match the manuals we have been shipping
with the kits. This also includes the latest errata for the T1 Assembly Manual.
73, Eric
___
Hi Jon,
13.31 kHz is OK. The manual is overly conservative. I think we mention this in
the errata and on our builders web page at:
http://www.elecraft.com/Apps/K2info.html. But in any case, we allow for up to at
least 18 kHz max PLL ref range.
73, Eric WA6HHQ
jon howe wrote:
I have made
Hi Julian,
I apologize for the inconvenience on this.
Unfortunately this is a requirement for Internet email list servers these days.
We get hit by literally hundreds of real SPAM messages daily and can not look at
each one manually. If the list engine didn't catch them the list would be
Posted for Julian (Our SPAM engine caught him..)
Eric
---
Subject:RE: [Elecraft] Should You Built It? Not necessarily
From:Julian, G4ILO [EMAIL PROTECTED]
Date:Thu, 31 Mar 2005 12:05:10 +0100
To:Elecraft List elecraft@mailman.qth.net
Perhaps bonding is the wrong word. But when you build a radio
Guys - Let's kill this thread now. It was dealt with and explained more than a
day ago via private email between us and we're all happy :-)
Must be a night for Long Delayed Echoes...
73, Eric WA6HHQ
Elecraft list manager
John {N5BSD} wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
When replying to emails on the list, please remember to edit down the copied
text to the minimum needed to retain context. One or two sentences from the
original post are usually sufficient. This keeps the list and archive volume
down and makes everything much more readable.
*** Don't forget to
I just got back in town from a Long Weekend at the Visalia DX convention. Looks
like we've had a lot of emails on the list this weekend! (It always seems to
happen when I'm off line..)
In any case, lets end this non-K1/K2/T1 etc OT thread for now to relieve the
email pressure on others ;-)
Lets end this one too. :-)
73, Eric WA6HHQ
Elecraft List Moderator
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Let's end the thread of QRO vs QRP and whether amps (at any price) are
necessary. We're taking up way too much list bandwidth on this topic and several
posts have bordered on attacking other posters, which is outside the list
guidelines..
There are good arguments for each type of operation
For those of you with PayPal money burning a hole in your pocket ;-) ,
we now accept payment transfers directly from your PayPal account.
(Funds transfers only - Use our regular credit card option at checkout
for cards.)
Use our regular shopping cart system and then chose the 'Order by
Hi John,
That was more of a general statement and not meant to be specific :-) . It did
not refer to any specific developments. No new radios in the near term for sure.
73, Eric WA6HHQ
Elecraft
---
John [K7SVV] wrote:
The paragraph that caught my eye said:
The company hopes to continue
I'm just about to jump on the plane to Dayton, and realized I had forgotten to
post to the list asking for booth help! :-)
If you are interested in helping out, meeting other Elecraft enthusiasts, and in
spreading the word to possible new inductees, we would love to have your help at
the
Heil discontinued the hand mic. Yes, we are working on a new one, but it will be
a little bit before we get them to market.
73, Eric
Paul Saville wrote:
The MH2 is now listed as discontinued. Will there be an Elecraft-branded replacement for
those who don't fancy pop star type microphones?
Let's end this one. we're drifting -way- off topic :-)
73, Eric WA6HHQ
Elecraft list moderator
EricJ wrote:
Was it ever? I don't remember any classes in horse sense.
Eric
KE6US
-Original Message-
But common ordinary horse sense is no longer taught in the schools.
73,
Just a reminder for those of you planning to get a K1, K2, KX1 or
accessories for use on Field Day this year. Get you orders in soon as we
always get a rush in orders and can temporarily run out of some products
as Field Day approaches. We're in good shape right now (only T1-As are
about a
In the spirit of keeping reflector traffic at a readable volume, lets let this
topic end for the moment. :-)
73, Eric WA6HHQ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
ELECRAFT K2 BUILDER ALERT #22
KPA100 Cap Kit Upgrade
23 June, 2005
APPLICABILITY
This builder alert applies to ALL KPA100s shipped until June 13, 2005. If your
KPA100 was shipped after June 13, 2005, or if it puts out 100W on 20M and 17M
without drawing much more than 20 amps at 13.8V, it
I've just added links to the following Logging programs that now support the K2
on our K2 Software page:
EasyLog5
MILog
RCKLog
See: http://www.elecraft.com/k2_remote.htm
73, Eric WA6HHQ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
I've just posted the results for the 2005 Elecraft QSO Party (EQP) to our web
page. See:
http://www.elecraft.com/Awards/eqp_2005_results.htm
Thanks again to Roger, WA7BOC, for tallying these results!
See everyone next year for EQP 2006!
73, Eric WA6HHQ
T1-A auto-tuners are now back in stock ready for immediate shipment :-)
73, Eric WA6HHQ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
In the interest of keeping list traffic under control and in not drowning out
our regular traffic, let's let this thread rest for now. If everyone posts their
opinion on it well have well over 2000 emails.
I'm sure it will have a very spirited discussion on hundreds of other forums ;-)
73, Eric
Looks like this thread is starting to degenerate a bit. Let's let it rest for
now :-)
73, Eric WA6HHQ
Elecraft list moderator
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
Don't forget that Elecraft Technical Support is always only an email away. When
you have a question that can't be answered on the Elecraft list or are stumped
troubleshooting a problem, make sure to contact our experienced engineers at
[EMAIL PROTECTED] :-)
Gary, Scott, Brian and Richard are
You asked for it. :-)
Hams often wonder how well an HF receiver is really working--or how one
receiver compares to another. One of the most important performance
measurements is sensitivity. But measuring sensitivity usually requires
an expensive, lab-grade signal generator.
Elecraft's new
But wait, there's more.. ;-)
Elecraft Introduces the 2T-gen Two-Tone Test Generator
How do you know how clean your HF SSB transmitter or amplifier is? One
of the most important performance measurements is Transmit
Intermodulation Distortion (IMD).
Elecraft’s new 2T-gen is a 2-tone test
Just spotted this 'I love my K2' button on eBay :-)
73, Eric WA6HHQ
http://snipurl.com/hmaf
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
A number of people have asked how the VP6DX K3s were configured. Here is the
summary of options used on each of their K3s.
K3/100 +
KAT3 antenna tuner
KXV3 second receive antenna option.
KFL3A-250 250 Hz, 8-pole roofing filter
KFL3A-400 400 Hz, 8-pole roofing filter
KFL3A-1.0K 1 kHz,
At long last we have the K3 Enhancements and Application Notes Page, and
K3 enhancements parts kits order form, on-line. :-)
See: http://www.elecraft.com/K3/k3_app_notes.htm
and:
http://www.elecraft.com/order_form_parts.htm#K3%20Parts
There are .pdf documents for each item, along with the
s/n listing in any of the docs?
-- Children aren't happy without something to ignore, And that's what
parents were created for. -Ogden Nash (1902-1971)
On 28 Mar 2008, at 01:09, Eric Swartz - WA6HHQ, Elecraft wrote:
At long last we have the K3 Enhancements and Application Notes Page,
and K3
Lets rest this thread (and related ones) for now. If not, it could
easily take over the reflector. ;-)
73, Eric WA6HHQ
Elecraft List Moderator
-
Matt Patterson wrote:
and then the added agony of trying to get any follow up action. With
the other guys (UPS, DHL, FedEx), if you insure it
Lets rest this thread (and related ones) for now. If not, it could
easily take over the reflector. ;-)
73, Eric WA6HHQ
Elecraft List Moderator
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the
Elecraft Mail LIST GUIDELINES
For those of you who are new to the list, (and for those of us who have
rapidly failing memories..), here is a quick list of things to remember when
posting to this list. Please save this for future reference.
The most important thing to remember is that this is
Let's end this thread for now.
73,
Eric WA6HHQ
Elecraft List Moderator
_..._
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
I thought we ended this thread :-) (It keeps popping up under new
subject lines..)
Lets end this thread for now.
73, Eric WA6HHQ
List Moderator
-
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to
Within a week.
73, Eric
Mike N8XPQ wrote:
Anyone have any idea how far out we are on the next badly needed firmware
update?
-
Mike Koetje N8XPQ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to
I'm posting an alert with details on this by end of day today. (Both on
the web page and to the Elecraft list.) We're just finalizing the docs
right now.
This will include the serial number range and instructions on adding the
ground wire to correct it. We only became aware of this late last
We have just uploaded an important mod to the K3 Mod and App notes page.
This mod adds one wire to the K3 FP board to correct a problem with VOX
operation and low mic gain when Electret mics requiring mic bias on the
mic audio line were used on the front panel connector of the K3.
(Recently
1 - 100 of 2674 matches
Mail list logo