In a message dated 10/19/04 [EMAIL PROTECTED]:
<>
First, OS X is out. You need at least a PCI Mac even to be unsupported. A G3
B &W is the minimum supported CPU for the latest version of OS X.
With that said, generally you will see a big performance improvement with a
G3 upgrade; depending on
In a message dated 4/26/05 "Jennifer Worgan" <[EMAIL PROTECTED]>:
<< Iomega Zip drive? Mac can read PC formated Zip disks - done it many times
both ways for many reasons - would it work in this case? >>
Good question. The original poster is using OS 7. Does OMEGA have a driver
for PC formatte
<>
No, but I always back up before a major OS install -- just in case something
goes awry.
If you like, I can send to you a CD-ROM 7.5.3 with the 7.5.5 update. I
believe this is legal. If not legal, please someone say so and I will not do
it.
Downloading 15 or so floppy images for 7.5.3 + t
In a message james grant tyner <[EMAIL PROTECTED]> writes:
<>
I quick google search of "CRX170E" gives a link to a g-list post that
identifies the Sony as an ATA device. If this true it won't work in a 6100 you
will
need a SCSI device for a replacement.
To verify this, count the number of pin
In a message NODEraser [EMAIL PROTECTED] writes:
<< I have a PowerMac 6100/66 with a G3-266 daughtercard. I have recently had
to reformat and reinstall Mac OS 9.1. Since the reinstall, I have been unable
to use AppleTalk for networking or printing purposes. Any ideas as to what has
caused this?
In a message NODEraser <[EMAIL PROTECTED]> writes:
<>
My bad, I assumed you were using Ethernet. These old machines will do
Ethernet I have three 6100's on my network, you just need a AAUI transceiver
which
are available used for $5-10. Of course any other computers and devices on your
networ
In a message Geoffrey Loeffler <[EMAIL PROTECTED]> writes:
<>
Good question, my simple answer is I don't know. I have no wireless
experience.
Here is what I can offer:
I don't think your printer will work connected to the printer port with the
other networked Mac's. The printer needs to suppo
In a message Geoffrey Loeffler <[EMAIL PROTECTED]>writes:
<< Glen
> The printer needs to support Ethernet or you will need a
> LocalTalk to Ethernet bridge. I used an AsanteTalk bridge when I had
> LaserWriter NTX and a LaserWriter 360 connected.
So I will need a AsanteeTalk Bridge, LocalTalk to
In a message Geoffrey Loeffler <[EMAIL PROTECTED]> writes:
<< On Sep 14, 2005, at 5:07 , [EMAIL PROTECTED] wrote:
> Ken's printer sharing solution sounds good and a lot less
> complicated than
> the Apple LocalTalk Bridge software.
Yes and that was my first idea as I would like to get the 6100
<<
> It probably is a heat problem - it definately lasts longer with the
> DOS card removed. I've got a small fan that I might mount in there to
> increase the airflow a bit. (or I could watercool it of course ;). Now
> that would be a sight to see)
>
You might also be able to try replacing the
In a message Madcrowwrites:
<<
Hi. I'm Madcrow and I recently got my first Mac in quite some time, a
PowerMac 7100/80 with a video card and an unknown quanity of RAM. I'd like to
be able
use my Samsung SyncMaster 4NE with the computer, but the cable doesn't fit.
Is there a convereter that wil
11 matches
Mail list logo
