[mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 03, 2003 4:18 AM
To: [EMAIL PROTECTED]
Subject: Re: [Chevelle-List] harmonic balancer
Don't know how Sarg and the boys did it... But in my poor youth,, I would
bolt a chain to head bolts on each side and use a pipe run through the
loops..
one guy
Title: Message
Charles, try using about a 12 inch long stout screw driver or small pry
bar. The bolts that get threaded to the balancer should give you a little room
between the plate and the balancer after the bolts bottom out. Once you have
taken up all the slack with the center bolt place
:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On Behalf Of
[EMAIL PROTECTED]Sent: Sunday, June 01, 2003 2:17 PMTo:
[EMAIL PROTECTED]Cc: [EMAIL PROTECTED]Subject:
[Chevelle-List] harmonic balancer Hi
listers... Here's a quick question. How do I get
the Harmonic Balancer off? I bought the HB
I'm using the exact same tool, Brad. Its just that the balancer isn't stationary. Its keep turning as it would if the engine was started (just it turns along with the threaded rod and plate on the remover). I'm going to try to jam something between the balancer and the engine front maybe, but it
PROTECTED]
Sent: Sunday, June 01, 2003 4:01
PM
To: [EMAIL PROTECTED]
Subject: Re: [Chevelle-List]
harmonic balancer
Thanx for the response,
Brad.
But that's where my problem lies. Once I start to turn the remover clockwise
the harmonic balancer it self is still moving in a clockwise direction. So
?
RichACES #
05066
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, June 01, 2003 8:01 PM
Subject: Re: [Chevelle-List] harmonic
balancer
Thanx for the response, Brad.But that's where my
problem lies. Once I start to turn the remover
-
From:
Fruhauf Kerry A SSgt 3CS/SCBS
To: [EMAIL PROTECTED]
Sent: Monday, June 02, 2003 11:08
AM
Subject: RE: [Chevelle-List] harmonic
balancer
Is the motor in the
car? If so, put her in gear, and spin the balancer off. It really
should end up being an easy
Message-
From: Spiderman86
[mailto:[EMAIL PROTECTED]
Sent: Monday, June 02, 2003 3:05 PM
To: [EMAIL PROTECTED]
Subject: Re: [Chevelle-List]
harmonic balancer
I removed mine in the car, don't ask
me why, I was going to pull the motor anyway
ok, call me dipshit, I expect
someone
OK Sarge
I want to meet these 2 guys who lifted your motor out..and how in the
hell did you get them in the engine compartment? Unless they were Corporals
just obeying orders !!!
Bill C
-
To Unsubscribe please visit
You don't question an order, you just DO IT. 8^]
Jim
'66 Malibu
--- [EMAIL PROTECTED] wrote:
OK Sarge
I want to meet these 2 guys who lifted your motor
out..and how in the
hell did you get them in the engine compartment?
Unless they were Corporals
just obeying orders !!!
Bill
PROTECTED]
Sent: Tuesday, June 03, 2003 7:40 AM
Subject: Re: [Chevelle-List] harmonic balancer
OK Sarge
I want to meet these 2 guys who lifted your motor out..and how in
the
hell did you get them in the engine compartment? Unless they were
Corporals
just obeying orders !!!
Bill C
Hi listers...
Here's a quick question. How do I get the Harmonic Balancer off? I bought the HB Remover and now every time I turn the Harmonic Balancer Remover to get it off, the entire Balancer moves and spins. How can I stop it from moving so I can get it off?
And suggestions would be
From: [EMAIL PROTECTED]
Date: Sun, 1 Jun 2003 14:16:51 EDT
Subject: [Chevelle-List] harmonic balancer
Here's a quick question. How do I get the Harmonic Balancer off? I bought
the HB Remover and now every time I turn the Harmonic Balancer Remover to
get it off, the entire Balancer moves
Thanx for the response, Brad.
But that's where my problem lies. Once I start to turn the remover clockwise the harmonic balancer it self is still moving in a clockwise direction. So it seems as though I'm not actually tightening remover to pull the balancer off.
I've tried to wedge something
while you take off the balancer.
Ðäññÿ ..
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, June 01, 2003 6:01 PM
Subject: Re: [Chevelle-List] harmonic
balancer
Thanx for the response, Brad.But that's where my
problem
From: [EMAIL PROTECTED]
Date: Sun, 1 Jun 2003 20:01:27 EDT
Subject: Re: [Chevelle-List] harmonic balancer
But that's where my problem lies. Once I start to turn the remover clockwise
the harmonic balancer it self is still moving in a clockwise direction. So it
seems as though I'm not actually
Oh yeah.. one more question. On an automatic car, what is the best way to keep the
crank from turning?
Gary
-
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]
, 2002 8:09 PM
To: [EMAIL PROTECTED]
Subject: Re: [Chevelle-List] Harmonic Balancer Installation (part 2)
How does the installation tool work?
Gary
-
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail
Gary,
Get a about a 3 all thread bolt with the proper threads (grade 8).
Put a nut and large washer on the bolt. Start the balancer over the key,
put the bolt in and bottom it out in the crank, then snug the nut and
washer up to the balancer and drive it on by tightening the nut. The
only
-List] Harmonic Balancer Installation (part 2)
How does the installation tool work?
Gary
-
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED
20 matches
Mail list logo
