I assume that you are using an Xwindows system and have a web browser
installed. Try http://localhost:631/ to pull up the Cups aministration
page. Set your printer defaults there and lp will follow. I find lp too
arcane for my tastes being lazy. At the main page select: Add printer
I hope this is not a duplicate.
I'm not sure whether this is a Drupal web editor problem or a Debian
Exim problem but when automatic messages are sent by my new web site (in
early development) they go nowhere. The pertinent Exim4 log entries are:
2010-09-22 08:29:36 exim 4.72 daemon started:
.
=
On 01/-10/-28163 11:59 AM, Camaleón wrote:
On Wed, 22 Sep 2010 14:27:57 -0700, Gary Roach wrote:
I hope this is not a duplicate.
I'm not sure whether this is a Drupal web editor problem or a Debian
Exim problem but when automatic messages are sent by my new web site (in
early development
to fix it. I use Verizon Fios with an M1424WR router if
that is any help.
Gary R.
On 01/-10/-28163 11:59 AM, deb...@kulisz.net wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 23/09/10 21:35, Gary Roach wrote:
Well, you were correct about the authentication being a problem. I fixed
I use a KVM switch to run 3 computer off the same monitor. I need a way
to change size and position on each graphic card separately. I have an
ATI Radeon 9000, a Sapphire RV250 and an onboard Intel DP55KG mother
board. The ATI is a Win2K box and has an ATI Catalyst Control Center.
The two
I have a dual boot Toshiba Qosmio laptop? that I am upgrading from
Lenny to Squeeze. Everything worked fine (Using Aptitude) until the
installation of netatalk started; a program that I really don't need. I get:
Extracting templates from packages: 100%
Preconfiguring packages ...
On 01/-10/-28163 11:59 AM, Tom H wrote:
On Thu, Nov 11, 2010 at 7:29 PM, Gary Roachgary719_li...@verizon.net wrote:
I have a dual boot Toshiba Qosmio laptop? that I am upgrading from Lenny
to Squeeze. Everything worked fine (Using Aptitude) until the installation
of netatalk started; a
On 01/-10/-28163 11:59 AM, Tom H wrote:
On Fri, Nov 12, 2010 at 2:45 PM, Gary Roachgary719_li...@verizon.net wrote:
On 01/-10/-28163 11:59 AM, Tom H wrote:
On Thu, Nov 11, 2010 at 7:29 PM, Gary Roachgary719_li...@verizon.net
wrote:
I have a dual boot Toshiba Qosmio
I have a dual boot Windows XP / Lenny Toshiba Qosmio G25 laptop. I have
it setup for dual boot with XP on one hard drive and Linux on the other.
I wanted to upgrade to Squeeze. I ran an Aptitude upgrade by changing
Lenny to Squeeze in the /etc/apt/source.list file and then running the
usual
Sorry Simon. When I said that my boot files were trashed I meant that
neither XP or Linux was working anymore. The laptop was a boat anchor.
Gary R.
On 01/-10/-28163 11:59 AM, Simon Hollenbach wrote:
- Original message -
I have a dual boot Windows XP / Lenny Toshiba Qosmio G25
I just installed Unison-gtk 2.32.52 (squeeze) sync tool on a KDE,
Squeeze system. How do you delete or edit a profile. There seems to be
no provisions for either.
Gary R.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Iceweasel 3.5.15 has been running on a Debian Squeeze system for ever,
with no problems. I have been trying to download FreeFileSync_xxx_tar.gz
for Ubuntu from Sourceforge.net. Each time I try the download window
opens normally and the load indicators work normally. When the loading
finishes
There are tons of articles out there on this subject, nearly all of them
either wrong or hopelessly out of date. It's driving me crazy. The
switch from KDE3 to KDE4 has changed everything. So lets start with the
very basic task of getting the linux system to recognize the existence
of the
Hi all;
I need to archive to disk all of my emails from one organization for the
year of 2012. I wish to burn them to CD in a format that others could
read much later. Can anyone tell me how to do this.I think that the real
problems are getting the selected emails out of icedove and then
Hi all,
I have a records archiving problem and don't know where to start. There
are 100 years of records that include hand written material, type
written hard copy, photos and a lot of email. I would like to have a
system based around mysql (if possible) that would allow flexible data
On 04/07/2013 05:56 PM, Zenaan Harkness wrote:
On 4/8/13, Gary Roachgary719_li...@verizon.net wrote:
Hi all,
I have a records archiving problem and don't know where to start. There
are 100 years of records that include hand written material, type
written hard copy, photos and a lot of email.
Hi all,
I needed to expand my Debian Wheezy system by adding a 1 TB drive and
decided to switch over to LVM2 in the process. I rolled up my old 160 GB
drive into the 1 TB drive and called the whole thing bigdisk and
chopped the drive into 3 logical volumes. Everything seemed to work
until I
Hi
My wife let her Debian machine get over 450 packages behind before I
caught it. What a mess. The last problem is that when booting up the
Welcome to Grub notice appears and then:
error:file not found
Entering rescue mode
grubrescue
If I run ls I find that the root
On 05/21/2013 04:24 PM, Gary Roach wrote:
Hi
My wife let her Debian machine get over 450 packages behind before I
caught it. What a mess. The last problem is that when booting up the
Welcome to Grub notice appears and then:
error:file not found
Entering rescue mode
On 05/22/2013 11:20 AM, Gary Roach wrote:
To all the questions.
I reinstalled grub2. The same problem persists.
I have run update-grub2 (a stub that runs grub-mkconfig for grub2)
several times with no improvement. i also ran grub-mkconfig directly.
Same results. See listing below.
I've had
On 05/22/2013 04:45 PM, Sebastian Canagaratna wrote:
Thank uou Frank and Klaus. As you surmised, it was a typo : I meant to
say /dev/sda to be sure I repeated the grub-install
and the version given by bootinfoscript if 1.99 though AI have
2.00-14. When I use grub rescue and type set
On 05/22/2013 05:51 PM, Gary Roach wrote:
On 05/22/2013 04:45 PM, Sebastian Canagaratna wrote:
Thank uou Frank and Klaus. As you surmised, it was a typo : I meant
to say /dev/sda to be sure I repeated the grub-install
and the version given by bootinfoscript if 1.99 though AI have
2.00-14. When
On 05/21/2013 04:24 PM, Gary Roach wrote:
Hi
My wife let her Debian machine get over 450 packages behind before I
caught it. What a mess. The last problem is that when booting up the
Welcome to Grub notice appears and then:
error:file not found
Entering rescue mode
On 05/23/2013 11:30 AM, Sebastian Canagaratna wrote:
Thank you Klaus. /dev/sda is hd0 and is the permanent hard disk. It
has the MBR on which I want to install
Grub. /dev/sdb is the removable hard disk.Its first partition is, as
you say, hd1,msdos1 on which grub2 is installed
under
Hi all,
I have found multiple warnings about Linux and the short head parking
time of the WD Green drives. I have seen multiple instances of the use
of the wdidle.exe package to reset this to say 30 seconds. But Western
Digital emphatically states that that utility in only for about 3
Hi all,
I have found multiple warnings about Linux and the short head parking
time of the WD Green drives. I have seen multiple instances of the use
of the wdidle.exe package to reset this to say 30 seconds. But Western
Digital emphatically states that that utility in only for about 3
On 05/30/2013 04:19 PM, Richard Hector wrote:
On 31/05/13 11:03, Lisi Reisz wrote:
That's a dangerously selective quote. The for all you know, is rather
significant.
Oh, come off it! Dangerous? All he said was that the choice of those
particular words, that particular mode of expression
On 05/30/2013 12:34 PM, Gary Roach wrote:
Hi all,
I have found multiple warnings about Linux and the short head parking
time of the WD Green drives. I have seen multiple instances of the use
of the wdidle.exe package to reset this to say 30 seconds. But Western
Digital emphatically states
On 06/03/2013 06:23 AM, Pertti Kosunen wrote:
On 3.6.2013 15:53, Celejar wrote:
Isn't that for WD drives? Mine's a Hitachi.
Yes, sorry didn't read whole post.
Hi all,
The method used to fix the idle time on WD drives won't work for the
Hitachi. You may want to look at the following url,
Hi all,
I keep having the situation where I want to cut and paste a section from
an email to another document. Is there any way to cut and paste from
iceweasel to the clipboard to a text document?
All help will be sincerely appreciated
Gary R.
--
To UNSUBSCRIBE, email to
My error. I meant icedove not iceweasel and I am using Wheezy. The
center wheel nor the shift+insert work for icedove. (See subject change)
Sorry
Gary R (the dyslexic typist)
On 06/07/2013 02:42 PM, George Standish wrote:
On Fri, Jun 07, 2013 at 02:17:23PM -0700, Gary Roach wrote:
I keep
On 06/08/2013 12:50 AM, Kailash wrote:
On Fri, Jun 07, 2013 at 02:17:23PM -0700, Gary Roach wrote:
I keep having the situation where I want to cut and paste a section
from an email to another document. Is there any way to cut and paste
from iceweasel to the clipboard to a text document?
Hi
On 06/10/2013 02:11 PM, Gary Dale wrote:
On 10/06/13 03:39 PM, Gary Roach wrote:
On 06/08/2013 12:50 AM, Kailash wrote:
On Fri, Jun 07, 2013 at 02:17:23PM -0700, Gary Roach wrote:
I keep having the situation where I want to cut and paste a section
from an email to another document
Not being able to find another mailing list that seems worthwhile I'm
hoping I can get a quick answer here. The following doesn't work.
System info:
wheezy
Apache2
php5
mySQL 5.?
My test web page:
!DOCTYPE html
html
head
meta charset=utf-8 author=Gary L. Roach/
titlePHP
On 06/21/2013 01:21 PM, Jerry Stuckle wrote:
On 6/21/2013 3:54 PM, Gary Roach wrote:
Not being able to find another mailing list that seems worthwhile I'm
hoping I can get a quick answer here. The following doesn't work.
System info:
wheezy
Apache2
php5
mySQL 5.?
My test web page:
!DOCTYPE
On 06/21/2013 02:43 PM, David Guntner wrote:
Gary Roach grabbed a keyboard and wrote:
On 06/21/2013 01:21 PM, Jerry Stuckle wrote:
Does your web page have a .php extension? What do you have in
/etc/apache2/mods-enabled?
The web page has an .html extension. Is a .php extension necessary
On 06/21/2013 02:58 PM, Jerry Stuckle wrote:
On 6/21/2013 5:37 PM, Gary Roach wrote:
On 06/21/2013 01:21 PM, Jerry Stuckle wrote:
On 6/21/2013 3:54 PM, Gary Roach wrote:
Not being able to find another mailing list that seems worthwhile I'm
hoping I can get a quick answer here. The following
On 06/21/2013 03:51 PM, Jerry Stuckle wrote:
On 6/21/2013 6:41 PM, Gary Roach wrote:
On 06/21/2013 02:58 PM, Jerry Stuckle wrote:
On 6/21/2013 5:37 PM, Gary Roach wrote:
On 06/21/2013 01:21 PM, Jerry Stuckle wrote:
On 6/21/2013 3:54 PM, Gary Roach wrote:
Not being able to find another
I found the problem. When using Blowfish I just click on the browser
button to view the page. Blowfish is using the URL file:///var/www/
to access the files. The index.html file doesn't work right when
accessed this way. If I hand enter localhost/index.html everything works
fine. I don't
On 06/21/2013 05:28 PM, Jerry Stuckle wrote:
On 6/21/2013 8:25 PM, Gary Roach wrote:
I found the problem. When using Blowfish I just click on the browser
button to view the page. Blowfish is using the URL file:///var/www/
to access the files. The index.html file doesn't work right when
Hi all.
How can I get KDE to default to iceweasel and not Konqueror. Debian
Wheezy version.
Gary R.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
On 07/07/2013 01:54 PM, Robert Holtzman wrote:
On Sun, Jul 07, 2013 at 12:21:31PM -0700, Gary Roach wrote:
Hi all.
How can I get KDE to default to iceweasel and not Konqueror. Debian
Wheezy version.
Does wheezy include Preferred Applications? If so, call it up and
follow your instincts
*To:* debian-user@lists.debian.org
*Sent:* Sunday, July 7, 2013 4:54 PM
*Subject:* Re: Replacing Konqueror with iceweasel
On Sun, Jul 07, 2013 at 12:21:31PM -0700, Gary Roach wrote:
Hi all.
How can I get KDE to default to iceweasel and not Konqueror. Debian
Wheezy version.
Does wheezy include
On 07/09/2013 11:47 AM, Robert Holtzman wrote:
On Mon, Jul 08, 2013 at 07:08:47PM -0700, Gary Roach wrote:
On 07/07/2013 01:54 PM, Robert Holtzman wrote:
On Sun, Jul 07, 2013 at 12:21:31PM -0700, Gary Roach wrote:
Hi all.
How can I get KDE to default to iceweasel and not Konqueror. Debian
I just upgraded my old Intel P4 system with a 3Ghz multithread (2
processors?) processor and 4 GB ram. I am running Debian Wheezy with a
KDE desktop. My present kernel is Linux-3.8-1=686-pae. From reading, I
think I need to change the kernel to the bigmem version but all of the
packages shown
On 07/09/2013 11:40 PM, Greg Madden wrote:
On Tuesday 09 July 2013 13:46:05 you wrote:
I just upgraded my old Intel P4 system with a 3Ghz multithread (2
processors?) processor and 4 GB ram. I am running Debian Wheezy with
a KDE desktop. My present kernel is Linux-3.8-1=686-pae. From
reading, I
On 07/10/2013 10:39 AM, Robert Holtzman wrote:
On Tue, Jul 09, 2013 at 02:33:13PM -0700, Gary Roach wrote:
On 07/09/2013 11:47 AM, Robert Holtzman wrote:
On Mon, Jul 08, 2013 at 07:08:47PM -0700, Gary Roach wrote:
On 07/07/2013 01:54 PM, Robert Holtzman wrote:
On Sun, Jul 07, 2013 at 12:21
On 07/10/2013 02:53 PM, Joel Rees wrote:
On Thu, Jul 11, 2013 at 1:47 AM, Gary Roach gary719_li...@verizon.net
mailto:gary719_li...@verizon.net wrote:
On 07/09/2013 11:40 PM, Greg Madden wrote:
On Tuesday 09 July 2013 13:46:05 you wrote:
I just upgraded my old Intel
On 07/11/2013 01:47 AM, Chris Davies wrote:
Gary Roachgary719_li...@verizon.net wrote:
Now I am really confused. I have two systems; one with an Intel P4,
3GHz, multi-thread and one with an Intel i5-750. Both are running Wheezy
with a KDE desktop. The i5-750 system recognizes the 4GB of memory
On 07/11/2013 11:03 AM, Jerry Stuckle wrote:
On 7/11/2013 12:05 PM, Gary Roach wrote:
Well I rebooted the system and went to Bios setup. The Bios shows 4, 1GB
memory modules. When boot starts the bios memory test ratchets up to 2.5
GB and stops. The problem seems to be with the bios
On 07/11/2013 06:10 PM, Stan Hoeppner wrote:
On 7/11/2013 6:10 PM, Gary Roach wrote:
Sorry, I've already done this with all possible permutations. They all
seem to be working fine. If I install a pair they show 2GB no matter
which pair I pick. Per the motherboard manual I should be getting
On 07/12/2013 07:52 AM, Rob Owens wrote:
- Original Message -
From: David Guntnerda...@guntner.com
I've been religiously backing up my Windows machine for years with a
program called Acronis True Image. It works well, lets me backup my
system to a second hard drive in the computer,
On 07/12/2013 12:35 AM, Stan Hoeppner wrote:
On 7/11/2013 9:49 PM, Gary Roach wrote:
On 07/11/2013 06:10 PM, Stan Hoeppner wrote:
On 7/11/2013 6:10 PM, Gary Roach wrote:
Sorry, I've already done this with all possible permutations. They all
seem to be working fine. If I install a pair
On 07/12/2013 12:35 AM, Stan Hoeppner wrote:
On 7/11/2013 9:49 PM, Gary Roach wrote:
On 07/11/2013 06:10 PM, Stan Hoeppner wrote:
On 7/11/2013 6:10 PM, Gary Roach wrote:
Sorry, I've already done this with all possible permutations. They all
seem to be working fine. If I install a pair
On 07/13/2013 03:17 PM, Stan Hoeppner wrote:
On 7/13/2013 3:09 PM, Gary Roach wrote:
And don't
forget that as the BIOS self tests it only finds 2.8 GB even though all
4 memory chips are detected.
Finally we're getting somewhere.
The entire length of this thread I was assuming you were seeing
On 07/14/2013 03:39 AM, Stan Hoeppner wrote:
On 7/13/2013 7:06 PM, Gary Roach wrote:
On 07/13/2013 03:17 PM, Stan Hoeppner wrote:
On 7/13/2013 3:09 PM, Gary Roach wrote:
And don't
forget that as the BIOS self tests it only finds 2.8 GB even though all
4 memory chips are detected.
Finally
On 07/17/2013 10:57 PM, Stan Hoeppner wrote:
On 7/16/2013 6:30 PM, Gary Roach wrote:
I can't say
that the memory is absolutely good but can say with a high degree of
certainty that it is the correct memory for the system.
I gave you the exact JEDEC specs the 4x 1GB DIMMs need to be, and you
On 07/18/2013 09:54 AM, Gary Roach wrote:
On 07/17/2013 10:57 PM, Stan Hoeppner wrote:
On 7/16/2013 6:30 PM, Gary Roach wrote:
I can't say
that the memory is absolutely good but can say with a high degree of
certainty that it is the correct memory for the system.
I gave you the exact JEDEC
On 07/17/2013 10:57 PM, Stan Hoeppner wrote:
On 7/16/2013 6:30 PM, Gary Roach wrote:
I can't say
that the memory is absolutely good but can say with a high degree of
certainty that it is the correct memory for the system.
I gave you the exact JEDEC specs the 4x 1GB DIMMs need to be, and you
On 12/06/2013 01:56 AM, Reco wrote:
On Fri, Dec 06, 2013 at 10:35:30AM +0100, François Patte wrote:
with acroread (on start):
(acroread:30504): Gtk-WARNING **: Unable to locate theme engine in
module_path: xfce,
The acroread needs i386 libraries from gtk2-engines-xfce package.
If I try to
On 12/06/2013 02:44 PM, Ralf Mardorf wrote:
On Fri, 2013-12-06 at 14:04 -0800, Gary Roach wrote:
After reading through this topic I find myself ask what happened to KDE.
I know its old and is probably bloated. But, with 500 GB of disk space,
4GB of RAM and a 4 processor CPU, who cares. Its
On 12/07/2013 08:17 AM, Osamu Aoki wrote:
On Wed, Nov 27, 2013 at 10:19:32AM +0100, ha wrote:
Anybody tried installing Debian on Toshiba Satellite U940?
Any know issues?
I cannot find much information on the net.
I can see that some Toshiba laptops are not very Deban-frendly
On 11/25/2013 02:38 AM, Ralf Mardorf wrote:
On Sun, 2013-11-24 at 23:04 +0530, AP wrote:
DEB vs RPM
This are 2 of several formats that are handled by package managers. I
prefer DEB over RPM, but what I like the most, is the package format
used by Arch Linux.
Yes, Linux is the kernel, but the
I just switched from using PHP and Mysql to Python / Django and
Postgresql. I am having trouble with the setup of Postgresql
permissions. I am locked out of some parts of the system and am unsure
when to use postgres login vs user login. Most of the Postgresql
instructions are written for
On 12/10/2013 11:13 PM, Raffaele Morelli wrote:
2013/12/11 Gary Roach gary719_li...@verizon.net
mailto:gary719_li...@verizon.net
I just switched from using PHP and Mysql to Python / Django and
Postgresql. I am having trouble with the setup of Postgresql
permissions. I am locked out
Would someone tell me how to edit the grub2 menu. I have over 10 items
showing including versions of the OS that I don't even use anymore.
Further, the items are out of order and I have to be careful when
rebooting or the wrong OS gets loaded. I'm using Debian Wheezy and AMD
64 OS with an
On 12/25/2013 12:14 PM, Gary Roach wrote:
Would someone tell me how to edit the grub2 menu. I have over 10 items
showing including versions of the OS that I don't even use anymore.
Further, the items are out of order and I have to be careful when
rebooting or the wrong OS gets loaded. I'm
Hi all,
I am running an Intel i5-750, 4 core processor with Debian 3.2.54-2
x86-64 OS and Debian Squeeze. Recent attempts to update the system, with
Aptitude (and dpkg), have failed because of a conflict between libc-bin
and libc-bin-amd64. I have not been able to resolve the conflict. My
On 04/23/2014 03:43 PM, Andrei POPESCU wrote:
On Mi, 23 apr 14, 11:58:49, Gary Roach wrote:
Hi all,
I am running an Intel i5-750, 4 core processor with Debian 3.2.54-2 x86-64
OS and Debian Squeeze. Recent attempts to update the system, with Aptitude
(and dpkg), have failed because
On 04/26/2014 02:57 AM, Andrei POPESCU wrote:
On Vi, 25 apr 14, 17:29:13, Gary Roach wrote:
When running Aptitude, a red bar in the bottom half of the screen
says
Unable to resolve dependencies. If I hit g after I update package list
and Mark Upgradable, the top of the screen lists:
iB
Hi All,
Somewhere along the line all of my iceweasel bookmarks disappeared. The
backup copy is still in the system but doesn't appear to contain any of
my old bookmarks. Would the old bookarks be stored someplace other than
.mozilla/firefox/hxwu63mv.default/bookmarkbackups#? Or am I just out
On 04/30/2014 11:20 AM, Curt wrote:
On 2014-04-29, Gary Roach gary719_li...@verizon.net wrote:
Somewhere along the line all of my iceweasel bookmarks disappeared. The
backup copy is still in the system but doesn't appear to contain any of
my old bookmarks. Would the old bookarks be stored
Hi All
I have given up on Wine for running some of my Windoz only software. Too
many glitches. I am trying to install Virtualbox and am getting
installation errors as follows:
root@supercrunch:/home/gary# aptitude install virtualbox
The following NEW packages will be installed:
dkms{a}
On 05/15/2014 08:43 AM, Gary Roach wrote:
Hi All
I have given up on Wine for running some of my Windoz only software.
Too many glitches. I am trying to install Virtualbox and am getting
installation errors as follows:
root@supercrunch:/home/gary# aptitude install virtualbox
The following
On 05/17/2014 01:27 AM, Filip wrote:
On Fri, 16 May 2014 12:06:51 -0700
Gary Roach gary719_li...@verizon.net wrote:
Here is an attempt to answer all of the questions and suggestions:
I am definitely installing Linux 3.2.0-4-amd64 ( I checked the
grub config files)
You'll have to stop
On 05/17/2014 08:49 AM, Tom Furie wrote:
On Sat, May 17, 2014 at 08:23:07AM -0700, Gary Roach wrote:
Sorry, I thought I had. --print-architecture = i386,
--print-foreign-architectures = amd64
And there it is - you are running a 32-bit system with a 64-bit kernel.
Cheers,
Tom
And how do I
On 05/17/2014 11:04 AM, Andrei POPESCU wrote:
On Sb, 17 mai 14, 10:29:43, Gary Roach wrote:
On 05/17/2014 08:49 AM, Tom Furie wrote:
On Sat, May 17, 2014 at 08:23:07AM -0700, Gary Roach wrote:
Sorry, I thought I had. --print-architecture = i386,
--print-foreign-architectures = amd64
On 05/17/2014 01:14 PM, Andrei POPESCU wrote:
On Sb, 17 mai 14, 12:34:12, Gary Roach wrote:
On 05/17/2014 11:04 AM, Andrei POPESCU wrote:
On Sb, 17 mai 14, 10:29:43, Gary Roach wrote:
On 05/17/2014 08:49 AM, Tom Furie wrote:
On Sat, May 17, 2014 at 08:23:07AM -0700, Gary Roach wrote:
Sorry
On 06/01/2014 11:51 AM, Gary Dale wrote:
On 01/06/14 02:20 PM, Curt wrote:
On 2014-06-01, Gary Dale garyd...@torfree.net wrote:
Curious. I noticed that nepomuk-server and dolphin both had a number of
zombie processes (around 16 each) attached. I killed the parent
processes then did a reinstall
I have a Verizon Fios 50 MBs connection but have noticed of late that
any significant updates (using Aptitude) start out at about 4-5 mBytes/s
and after about 15 - 20% of the files have been transfered the transfer
rate drops to about 1/20th of normal speed. Does anyone have any idea
why this
On 07/01/2014 07:07 PM, Donald Norwood wrote:
On 07/01/2014 08:45 PM, Gary Roach wrote:
I have a Verizon Fios 50 MBs connection but have noticed of late that
any significant updates (using Aptitude) start out at about 4-5
mBytes/s and after about 15 - 20% of the files have been transfered
Hi all
For the last few months I have been plagued by very slow response from
my system. As an example, it takes 2 1/2 minutes to drag and drop 80
files from my email inbox to the trash bin in icedove. It has taken as
high as 5 minutes for iceweasel to load. This problem is not just these
On 09/21/2014 11:54 AM, Gary Roach wrote:
Hi all
For the last few months I have been plagued by very slow response from
my system. As an example, it takes 2 1/2 minutes to drag and drop 80
files from my email inbox to the trash bin in icedove. It has taken as
high as 5 minutes for iceweasel
On 09/21/2014 11:54 AM, Gary Roach wrote:
Hi all
For the last few months I have been plagued by very slow response from
my system. As an example, it takes 2 1/2 minutes to drag and drop 80
files from my email inbox to the trash bin in icedove. It has taken as
high as 5 minutes for iceweasel
After cloning my bad drive to a new one and installing the new drive
(see previous messages titled excessive CPU usage) i am left with the
following problem:
Kate and libreoffice.writer refuse to open and give the errors
soffice.bin[10369]: segfault at 7ffe25921b1c ip 7ffd559f97c3 sp
On 10/07/2014 03:00 PM, Gary Roach wrote:
After cloning my bad drive to a new one and installing the new drive
(see previous messages titled excessive CPU usage) i am left with the
following problem:
Kate and libreoffice.writer refuse to open and give the errors
soffice.bin[10369]: segfault
On 10/11/2014 06:28 PM, Don Armstrong wrote:
On Tue, 07 Oct 2014, Gary Roach wrote:
After cloning my bad drive to a new one and installing the new drive
(see previous messages titled excessive CPU usage) i am left with the
following problem:
Kate and libreoffice.writer refuse to open and give
On 10/11/2014 06:28 PM, Don Armstrong wrote:
On Tue, 07 Oct 2014, Gary Roach wrote:
After cloning my bad drive to a new one and installing the new drive
(see previous messages titled excessive CPU usage) i am left with the
following problem:
Kate and libreoffice.writer refuse to open and give
On 10/12/2014 09:30 AM, Gary Roach wrote:
On 10/11/2014 06:28 PM, Don Armstrong wrote:
On Tue, 07 Oct 2014, Gary Roach wrote:
After cloning my bad drive to a new one and installing the new drive
(see previous messages titled excessive CPU usage) i am left with the
following problem:
Kate
Hi all,
Problem:
I am working on an archiving project and wish to archive documents to
searchable pdf files but can't seem to figure out how to proof read and
correct the text overlay. Any suggestions.
System:
Debian Wheezy
Intel i5-750 processor
HP Officejet Pro
On 10/30/2014 05:47 PM, Gary Roach wrote:
Hi all,
Problem:
I am working on an archiving project and wish to archive documents
to searchable pdf files but can't seem to figure out how to proof read
and correct the text overlay. Any suggestions.
Tesseract seems to do a really great job
On 10/31/2014 04:15 PM, Doug wrote:
On 10/31/2014 06:31 PM, Gary Roach wrote:
On 10/30/2014 05:47 PM, Gary Roach wrote:
Hi all,
This is part of a medium sized, low budget archiving project that
will process serveral thousand documents, all done by low tech
volunteers. So I really need
On 11/01/2014 06:35 PM, Scott Ferguson wrote:
On 31/10/14 11:47, Gary Roach wrote:
Hi all,
Problem: I am working on an archiving project and wish to archive
documents to searchable pdf files but can't seem to figure out how to
proof read and correct the text overlay. Any suggestions.
I'm
On 11/07/2014 06:20 PM, golinux wrote:
On Fri, 11/7/14, Carl Fink c...@finknetwork.com wrote:
Subject: Re: Joey Hess is out?
To: debian-user@lists.debian.org
Date: Friday, November 7, 2014, 7:49 PM
Anyone else read the subject line and think, Why would I care that
Joey is gay?
On 11/07/2014 06:20 PM, golinux wrote:
On Fri, 11/7/14, Carl Fink c...@finknetwork.com wrote:
Subject: Re: Joey Hess is out?
To: debian-user@lists.debian.org
Date: Friday, November 7, 2014, 7:49 PM
Anyone else read the subject line and think, Why would I care that
Joey is gay?
On 11/08/2014 06:01 PM, golinux wrote:
Subject: Re: Joey Hess is out?
To: debian-user@lists.debian.org
Date: Friday, November 7, 2014, 7:49 PM
Anyone else read the subject line and think, Why would I care that
Joey is gay?
Did you actually
On 11/08/2014 04:19 AM, Keith Peter wrote:
Hello Bret and All
Mr Hess was writing to the 1000+ Debian developers so the subject line
*may* have made instant sense to them, but I take the wider point.
We had better explain the 'so long and thanks for all the fish' quote
as well (looking at your
On 01/26/2015 06:24 AM, Jonathan Copeland wrote:
Hi Debian Community
I am a student and need to have Debian installed on my Mac for my degree,
What is the best and most secure way of doing this?
Thank you so much
___
Jonathan Michael Copeland
*M *// (+27) 82 857 1349
On 01/26/2015 06:24 AM, Jonathan Copeland wrote:
Hi Debian Community
I am a student and need to have Debian installed on my Mac for my degree,
What is the best and most secure way of doing this?
Thank you so much
___
Jonathan Michael Copeland
*M *// (+27) 82 857 1349
On 01/02/2015 10:42 AM, John L. Ries wrote:
Debian might well work for your purposes as it's relatively easy to
set up and has a huge software repository; but your problem appears to
be memory. If your CAD software was sluggish even when you were
running Windows 7 directly, it's not going to
101 - 200 of 334 matches
Mail list logo
