Hello,
it´s possible to use a BNC switch to connect the RX antennas to the RX ANT
IN and the AUX connectors in the K3? Or is better to use a BNC splitter.
I want to use it to switch between RX antenna and diversity mode (AUX).
Will be any loose of reception with a switch or splitter? Wich one
Hmmm..look like EMTRON's...
Hope he has better luck with them than I had with 2 units..:-(
Gary
On 24 April 2011 13:45, Dale Harding K7DNH dh2...@sbcglobal.net wrote:
My error - thanks for the correction!
--
View this message in context:
I can actuate a P3 macro from within the P3 Utility. But I don't see a way to
attach the macro to one of the function keys. Is that coming?
I added a P3 command to the tail end of an existing K3 macro using the K3
Utility. It worked properly from within the K3 Utility. I then wrote that
macro to
Jorge Diez - CX6VM-2 wrote:
it´s possible to use a BNC switch to connect the RX antennas to the RX ANT
IN and the AUX connectors in the K3? Or is better to use a BNC splitter.
I want to use it to switch between RX antenna and diversity mode (AUX).
Will be any loose of reception with a
Sent via BlackBerry by ATT
-Original Message-
From: Bill W4ZV btipp...@alum.mit.edu
Sender: elecraft-boun...@mailman.qth.net
Date: Sun, 24 Apr 2011 03:51:23
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 - BNC switch for RX IN AUX?
Jorge Diez - CX6VM-2 wrote:
it´s
The morning sun... isn't. It is snowing lightly, and 0C, 32F, but no wind.
Slick to step out, and the ladies will enjoy that warm wrap.
Happy Easter to all. I'm planning to check out my AT rigs, the K2, and my Heath
twins. Hope to see you on the air one of these days.
Happy Easter to each of
thansk Bill,
I use a DX Pedition II by KD9SV to switch up to 4 beverages, works great with
the K3. Will add a splitter to use it as you described in the old post
73,
Jorge
CX6VM/CW5W
-Mensaje original-
De: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net]
En
Item sold, thanks for the band width here.
TNX 73,
Johnny VR2XMC
- 轉寄的郵件
從︰ Johnny Siu vr2...@yahoo.com.hk
收件人︰ Elecraft elecraft@mailman.qth.net
副本(CC)︰ elecraft...@yahoogroups.com elecraft...@yahoogroups.com
傳送日期︰ 2011年04月24日 (週日) 10:23 AM
主題︰ For Sale: XG2, 3 Band 1-uV / 50-uV
Hi Nate.
I'm running CQRLog Alpha2.
The big change was in the back end database.
They switched from Firebird to MySQL and they have created binary
packages. Slowly but surely this app is sneaking up on the likes of
DXLab on Windows.
--
R. Kevin Stover
AC0H
Barney,
Re the first problem, I suspect your LINE IN level may be sitting on
zero. With the radio in DATA A or AFSK A mode, make sure your MIC SEL is
set to LINE IN (I believe this is the default in DATA A and AFSK A
modes, but if not you can set it using the MENU button). Now turning the
MIC
I asked the same question. I also wanted to to send K3 macros from P3 buttons!
I believe
that these features are 'on the list' for future development.
On 4/24/2011 2:05 AM, Mike K2MK wrote:
I can actuate a P3 macro from within the P3 Utility. But I don't see a way to
attach the macro to one
I am using the LP-Pan on the K3 IF and its clock runs at
8.215x4. Actually, the later models of the LP Pan run at
(8.215-.006)x4 = 8.209x4 = 32.836 MHz. LP-Pan set up for radios
other than the K3 have a different LO to suit those radio's IF.
Minimum sampling rate needs to be 2x the IF
The below was posted last July. I just experienced the same problem
(for no apparent reson)
that Bruce discribed, only my problem affected LSB only. I tried
disabling and then
reenabling FL1 in LSB using the K3 utility -- no help. I did not do a
reset; the RESTORE
CONFIGURATION
To:
Darn computers -- I accidentally hit the send button before my message
was complete. Here it is again:
The below was posted last July. I just experienced the same problem
(for no apparent reason)
that Bruce described, only my problem affected LSB only. I tried
disabling and then
re-enabling FL1
Just to add a suggestion more to what Rick told you that's perfect, maybe
it's not your case but did you place Signalink internal jumpers in the
proper position respect the cabling you are using to k3 ? I told this
because when I moved from IC 756 to k3 I risked to forget correcting the
jumpers
Ok on the MA5V vertical I can hear a carrier on 14.316 and on the dipole the
carrier is twice as bad on 14.316 pretty much from 14.315-14317 is unusable. I
was thinking this was an internal birdie but would changing antennas make a
difference? Now I suspect its something local. Anyone else
John you weren't hearing things, I heard the same strong tone. I was able
to notch it out but it was bad nonetheless.
73,
John
N2HMM
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Cooper
Sent: Sunday, April 24,
Mine is at 14317.00 and is moderately weak. I suspect it is an Ethernet
signal. I host and power the local wireless RAP at the top of my tower
in exchange for free moderate speed i'net. Several weak constant
carriers appeared on most bands when they installed it. I suspect they
may be
I've had a weak 'carrier' in this spot for years. Used to have to endure it for
the Icom Net at 14.317 in the old days. No clue what it is.
Grant/NQ5T
Sent from my iPhone
On Apr 24, 2011, at 2:29 PM, Fred Jensen k6...@foothill.net wrote:
Mine is at 14317.00 and is moderately weak. I
Good afternoon all, I was wondering if it was possible to have all the same
setting that are on the main VFO transfer to the sub VFO when you activate it.
This way when I want either diversity mode or just plan sub VFO the same
filters and so on are auto selected instead of having to go into B
When I use MV and the vfo A knob to cycle through 2m memories I hear a
relay click each time I move to a new 2m memory, even before hitting MV
to exit that mode. Is this expected? It doesn't seem necessary.
Thanks!
Mike ab3ap
__
That tone has been there for years. As long as I remember.
73 de Ke4wy Jim
Sent from my compound.
On Apr 24, 2011, at 3:38 PM, Grant Youngman n...@tx.rr.com wrote:
I've had a weak 'carrier' in this spot for years. Used to have to endure it
for the Icom Net at 14.317 in the old days. No
Hi,
That's almost certainly the 4th harmonic of an NTSC TV color burst
oscillator. It should zero beat at 14318kHz. The one I hear (about S3) has
multiple tones a few hundred Hz apart so the manual notch doesn't do a
perfect job of eliminating it but it helps a lot. It's not necessarily from
your
Mike,
Do you mean beyond what is set when you do an AB(3) button double click?
Rick
K6LE
On 4/24/2011, at 12:43 , Mike Weir wrote:
Good afternoon all, I was wondering if it was possible to have all the same
setting that are on the main VFO transfer to the sub VFO when you activate
it.
Will the KPAK3AUX have a provision to tap the CTRL line?? I have the PR6
Low-Noise 6-Meter Receive Preamplifier attached to the K3. If not can I get
access to the pins in the connector?
When the control (CTRL) is used and jumper P2 is removed (see Figure 3),
the K3 may be configured so
that the
Grant et al -
This is no mystery - it just seems like one. 14.316 (or 14.317) Mhz is
the 4th harmonic of 3.579 MHz, the common color burst frequency. Color
burst crystals are used in an incredible variety of consumer devices.
These days, the oscillators are usually configured as a
There was a bit of talk on this and hopefully not having to use two y
cables etc. I think Elecraft said that this issue would be addressed
with the new cable.
I hope so.
On 4/24/2011 2:09 PM, AB3EN wrote:
Will the KPAK3AUX have a provision to tap the CTRL line?? I have the PR6
Low-Noise
I don't have the problem on the 2nd or 3rd harmonic of 3579 KHz, but do on have
a tone between about 14.316 and 14.318 MHz.
73s de Dave KJ6CBS
From: Jim Wiley jwi...@alaska.net
To: Grant Youngman n...@tx.rr.com
Cc: elecraft@mailman.qth.net
Sent: Sun, April
It's the 4th harmonic
Sent from my iPhone
On Apr 24, 2011, at 3:35 PM, David Guernsey mooo1...@yahoo.com wrote:
I don't have the problem on the 2nd or 3rd harmonic of 3579 KHz, but do on
have
a tone between about 14.316 and 14.318 MHz.
73s de Dave KJ6CBS
Any comments on the following?
Am I out of line cross posting this?
73, Bill K3UJ
-Original Message-
From: george fritkin georgefrit...@yahoo.com
To: TenTec_Eagle tentec_ea...@yahoogroups.com
Sent: Sun, Apr 24, 2011 2:53 pm
Subject: Re: [TenTec_Eagle] Re: Eagle 599
I have an
Everyone has their own opinion.
73s Jim
On Apr 24, 2011, at 3:54 PM, Bill wrote:
Any comments on the following?
Am I out of line cross posting this?
73, Bill K3UJ
-Original Message-
From: george fritkin georgefrit...@yahoo.com
To: TenTec_Eagle
Mike, It sounds like you have memories set up on both sides of 146 MHz.
There is a relay that clicks when you shift L.O. frequency range from
144-146 and 146-148 MHz in the K144XV.
Try tuning across 146 MHz with your VFO and see if you hear the same click.
If so that would be it, but it should
I realize it is the 4th harmonic. I do not have any problems with any
harmonics
of 3579 KHz except the 14316 KHz (4th harmonic). Thus, I wonder if the problem
is really from the color burst crystal.
73s de Dave KJ6CBS
From: Grant Youngman n...@tx.rr.com
Well...not out of line Bill but George, W6GF is the one that bases his
opinion of transceiver selection solely on the audio reports he gets
from DX stations? If that were the case, the Collins S-Line would be
the best radio ever made (no I don't want to debate the audio
characteristics of
Ron, no, it happens even when I move from 147.030 to 147.060. I even
stored the same freq in VFO B to be sure that didn't have something to
do with it. But I get the little click each time I rotate the vfo A
knob from one 2m mem to the next. Just to emphasize, this is not when
I'm tuning but
David -
No, the problem is not the crystal. It is the _oscillator_. The
oscillator is usually a more or less square-wave type, which is rich in
harmonics. These harmonics are then radiated by the circuitry in the
offending device, and make their way to your station.
The function of
nbsp;Thanks for the suggestions. I figured out the PTT issue by disconnecting
the PTT from the signalink. Then allowing the software to control the PTT and
it now operates properly and does not hang.
nbsp;
Now to tackle the audio problem. I have checked that it in is Data A and that
it is set
Aww nuts! I meant hundreds of millions, of course!
- Jim
Jim Wiley wrote:
snip
They are inexpensive because literally hundreds of missions of them are
manufactured.
__
Elecraft mailing list
Home:
nbsp;I have not, but I purcahsed the rig, signalink and cable used from
someone whom I assumed was using the combination together. I will check as soon
as I find the allen wrench to open the case and find some more time to sit down
with it. Although I did resolve the PTT hanging issue by
On Sun, Apr 24, 2011 at 4:41 PM, Jim Wiley jwi...@alaska.net wrote:
Aww nuts! I meant hundreds of millions, of course!
- Jim
And each one has a mission, should it choose to accept it.
Tony KT0NY
__
Elecraft mailing list
Home:
On 4/24/2011 3:37 PM, Jim Wiley wrote:
David -
No, the problem is not the crystal. It is the _oscillator_. The
oscillator is usually a more or less square-wave type, which is rich in
harmonics. These harmonics are then radiated by the circuitry in the
offending device, and make their
Comment on what? Other than his statement about the audio he doesn't
say anything about why he rates one rig over another, so how would it be
possible to judge? And if he doesn't like the transmit audio on the K3
with all of the tailoring it allows, it's pretty obvious he doesn't know
how
FB Mike: That's a new one on me but with my weakened hearing (too much live
fire in the Army) I don't hear relays, usually (see, there's a good side to
everything).
If someone doesn't have an answer here, recommend you post your question on
the K3 support reflector (K3support *at* elecraft *dot*
I would suggest that ALL modern ERA radios have redeeming factors and the
user base will come to 'love' one and that will usually lead to overall
satisfaction.
As long as there is healthy debate on radio performance the engineers and
sales departments of all manufacturers will continue to strive
On 4/24/2011 1:39 PM, Grant Youngman wrote:
I don't have the problem on the 2nd or 3rd harmonic of 3579 KHz,
but do on have a tone between about 14.316 and 14.318 MHz.
It's the 4th harmonic
Digital TV receivers do not use a 3.57954528+ MHz subcarrier
like NTSC (analog) receivers do. In
I ask this question in advance of the amp actually arriving, so I can't try
it myself to see if it works. Maybe it's an 'Eric' question anyway.
I currently use the AUX output from the K3 to drive my 'Top Ten' type band
decoder (actually, it's a W9XT) to drive the antenna selection relays .
Having
If you are looking for an explanation of why the 4th harmonic, you
will have to actually find the offending device and analyze its
circuitry. As to whether that really is the problem? There are
billions of 3579 crystals out there embedded in everything imaginable,
far more in things that aren't
My thoughts are strictly subjective. I do not have the sophisticated equipment
to evaluate radios. Besides that, the differences are rather small and almost
within measurement accuracy. I just evaluated the radios strictly from an
operating point of view. They are all top performers and
Good point, but it could be someone's NTSC box that has an HD
converter in front of it. Still - hearing an even harmonic seems odd.
Or another piece of shack equipment that uses a color burst xtal.
73,
matt W6NIA
On Sun, 24 Apr 2011 17:02:52 -0700, you wrote:
On 4/24/2011 1:39 PM, Grant
Worked them 6 times so far, 10, 15, 17, 20 meters on SSB and CW, sure do
love the receiver in my K3, # 758.
73,
NF8J
Paul VanOveren
5911 Snow Ave.
Alto, Mi
616-868-7149
__
Elecraft mailing list
Home:
Running two separate sinks off the same source is always a crap shoot
unless you have analyzed the circuitry of the sinks and the source and
specifically determined that they are compatible in all states, which
must include all combinations of power on and power off states in all
three devices.
Every time I plus the USB cable in the back of my WINKEYER, I am getting an
error message ERR KEY. Also during contest when I am running my Amplifier,
my WINKEY goes dead and out with Windows sound bang, like my USB has been
unplug. Can I put some torriods to the USB cable? Any suggestions.
73
Suggestion: Get a shielded USB cable and/or use them throughout the
shack. Chassis-ground your computer. Use the ferrites too, but try
those suggestions first.
73,
matt W6NIA
On Sun, 24 Apr 2011 17:44:29 -0700, you wrote:
Every time I plus the USB cable in the back of my WINKEYER, I am
No pun intended, I presume!
- Jim, KL7CC
Matt Zilmer wrote:
snip
Still - hearing an even harmonic seems odd
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
All it takes to have a robust 2nd harmonic is something non-linear in the
circuitry using the 3.579 MHz color burst frequency. Consider the difference
frequency between the fundamental and the third harmonic such a non-linear
device would produce.
Ron AC7AC
It could also be another device that uses a crystal frequency of 14.31818 MHz.
That is also a very popular Microcontroller frequency.
You might also want to look at the computer video card since it probably
generates this frequency. Maintaining a very stable frequency is much easier
when you
I'm not familiar with a Winloe detector. I assume you are using some
kind of quadrature downconverter, such as LP-PAN, to convert the K3's
8.215 MHz IF to an I/Q baseband signal to feed to the stereo input of a
sound card connected to a personal computer. In that case, the IF
bandwidth should be
Yes, on the list.
Alan N1AL
On Sun, 2011-04-24 at 08:31 -0700, Vic K2VCO wrote:
I asked the same question. I also wanted to to send K3 macros from P3
buttons! I believe
that these features are 'on the list' for future development.
On 4/24/2011 2:05 AM, Mike K2MK wrote:
I can actuate a
Yes, although the RS-232 commands are not implemented at this time. So
you can see the spectrum/waterfall just fine and most P3 functions work
but it does not read out the K2 frequency, and functions like
clidk-to-QSY are not implemented.
And of course you have to add an IF output connector to
Thanks for all your suggestions. As per one suggestion I unplugged the PTT
from the Signalink and let the program key the radio and that solved the
problem of the transmitter hanging.
As to output, I checked the cable from the Signalink and I was getting audio
from it. I plugged back in and turned
Good Evening,
Twenty meters was decent but there was a little noise. Nothing like
the noise on forty though. As in recent weeks the propagation on both
bands was not very good. With the high noise level on forty I was
wondering if would get anyone but just kept poking the send button
I would suggest that this RFI is coming from a Rife Bare Device and not
a old analog TV set.
We have the same thing in the DFW area.
Milton
AD5XD
--- On Sun, 4/24/11, Jack Brindle jackbrin...@earthlink.net wrote:
From: Jack Brindle jackbrin...@earthlink.net
Subject: Re: [Elecraft] 14.316
14.318 Mhz has been widely used on PC motherboards going back to the original
IBM PC-AT.
That would be high on my list of suspicious sources.
73,
Rich AC7MA
On 4/24/2011 12:56 PM, Jim wrote:
That tone has been there for years. As long as I remember.
73 de Ke4wy Jim
Sent from my
Which crystal frequency did they use on the IBM PCs before the AT came out?
Kevin. KD5ONS
On Sun, 24 Apr 2011 22:09:17 -0700, Rich Heineck ric...@frontier.com
wrote:
14.318 Mhz has been widely used on PC motherboards going back to the
original IBM PC-AT.
That would be high on my
They used 4.77MHz for IBM PC's and PC XT's.
73 de
Jeff Cochrane - VK4BOF
Innisfail, QLD, Australia
Elecraft K3 #4257 + KPA500 + PR6 + K144XV = Multiband greatness!
- Original Message -
From: Kevin Rock
To: elecraft@mailman.qth.net
Sent: Monday, April 25, 2011 3:17 PM
Subject:
I just checked, and it looks like even the original 8088 IBM PC had a 14.318
MHz
oscillator on it. And it's also one of the ISA bus signals.
Rich AC7MA
On 4/24/2011 10:17 PM, Kevin Rock wrote:
Which crystal frequency did they use on the IBM PCs before the AT came out?
Kevin. KD5ONS
66 matches
Mail list logo