Jerry,
This is my SDR Linux view setup. I am running on Ubuntu 14 - 64 bit.
I use QUISK (Version 3.6.11) - to interface my KX3 to a rather old Dell
Inspiron i7. To do this you need the USB Control cable (KXUSB) and a decent
sound card. The sound card on the laptop was mono
I use
Ubuntu 14, 64 bit - The Elecraft utilities work fine. USB Connections
are also easy and stable
Darwin - El Capitain - The Elecraft utilities work fine. USB
Connections are also easy and stable
No issues under linux at all as far as I can see.
I had earlier asked about using my config
from my K3 and transferring it to my new
K3s and was told it was not possible with
the software available & not advised
anyway because of the reasons already
cited in this thread.
Since I knew I had many options selected
in my K3 and wanted them in
When I install the KXPA100 (with ATU) with the KX3 & PX3 I am unable under the
“PA MODE” menu item to select “ON”. I only have two choices in this menu,
“OFF” and “Pout CAL”. When I turn the VFO A to the left from the “OFF”
setting, there are two relay clicks only. When I remove the plug
Dave Cole wrote:
> The new K5000 amp?
Nope. An early test of the K-EMP Electro Magnetic Pulse option for the KPA500.
Really gets everyone's attention in pileups. Instead of yelling "UP!!" to
chastise interlopers on the DX frequency, just push the big red button.
Wayne
N6KR
The new K5000 amp?
--
73's, and thanks,
Dave (NK7Z)
For software/hardware reviews see:
http://www.nk7z.net
For MixW support see:
https://groups.yahoo.com/neo/groups/mixw/info
For SSTV help see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Mon, 2016-04-18 at 17:26 -0700, Eric Swartz -
Mains Power, internet and phones are finally back up 100% at Elecraft HQ.
Whew!
Eric
/elecraft.com/
On 4/18/2016 7:34 AM, Eric Swartz - WA6HHQ, Elecraft wrote:
There is a massive power outage this morning covering the industrial park where
Elecraft HQ is located. Phones are currently
Its only 3.5 x 3 x 1 inches (9 x 7.5 x 2.5 cm) for the enclosure, plus the
height of the VFO knob (same as the K3S/K3).
Details at: http://www.elecraft.com/k-pod/k-pod.htm
73,
Eric
/elecraft.com/
On 4/18/2016 3:27 PM, Ron D'Eau Claire wrote:
Well, a K3S size knob nearly fills the "front
Well, a K3S size knob nearly fills the "front panel" and it's roughly a
cube.
Might fit in an expanding pocket in Cargo Pants but might make them sag a
bit. IIRC it weighs about a pound (450 grams).
73, Ron AC7AC
-Original Message-
From: Elecraft
"pull out of their pockets"?!?!
Just how small is this thing?
73,
Brian, W6FVI
On 4/18/2016 2:44 PM, Bill Frantz wrote:
It was really quite easy in Visalia at the International DX
Conference. Between the "official" ones on display, and the personal
ones various Elecraft people would pull out
* On 2016 18 Apr 14:24 -0500, David Davis wrote:
> I am curious what flavor of Linux everyone prefers with respect to being
> able to run the Elecraft utilities for the KX3 and other software related to
> amateur radio.
No problem with Debian 32 bit, a.k.a. i386 architecture. They can be
run on
It was really quite easy in Visalia at the International DX
Conference. Between the "official" ones on display, and the
personal ones various Elecraft people would pull out of their
pockets, and keep an eagle eye on, you didn't have to wait too
too long.
73 Bill AE6JV
On 4/18/16 at 12:34
On Apr 18, 2016, at 12:34 PM, "'Joe Subich, W4TV' li...@subich.com
[Elecraft_K3]" wrote:
>
> > We'll also be able to execute P3 macros directly from K-Pod switches,
> > as well as use the K-Pod's knob to control the marker knob on the P3.
>
> Does this include
Linux Mint 17.3
On Mon, 2016-04-18 at 13:21 -0600, David Davis wrote:
> I am curious what flavor of Linux everyone prefers with respect to being
> able to run the Elecraft utilities for the KX3 and other software
> related to amateur radio.
>
> Thanks in advance for the replies.
>
> David
>
Possible but not likely. I'll let you know if/when we try this.
Wayne
N6KR
On Apr 18, 2016, at 2:05 PM, "Jim Kutsch, KY2D" wrote:
> Wayne,
> It's not been asked yet but what about using the K-Pod on the KX3? At first,
> that might sound crazy since the KX3 is already very
Wayne,
It's not been asked yet but what about using the K-Pod on the KX3? At first,
that might sound crazy since the KX3 is already very small. But, the
additional macro buttons plus the rocker switch for VFO selection would be
nice features for a KX3.
73, Jim, KY2D
-Original Message-
Did this go out?
On April 18, 2016 1:04:42 PM EDT, Jerry Moore wrote:
>I'm looking at getting a Pan adapter of sorts in the near future. I
>like
>what I'm reading about SDRPlay but since I use a Raspberry Pi to
>interface
>my K3S I'm not sure on what software is
I run a service that redirects the community to the network and on the windows
side network to virtual Com port. The elecraft utilities run without issue as
needed. I'm running raspberry pi with noobs debian.
Jer
On April 18, 2016 3:45:42 PM EDT, Matt Zilmer wrote:
Hi all,
Here's another teachable moment for me lol. On P54 of the K2 manual, there's
an instruction to record the value written on the crystal filter package. It
says that this measured freq can later be used to align the filters.
I humbly admit that after a few years of being a K2 builder/owner
All the Windows-native Elecraft utilities work fine with Wine. Elecraft
also supplies Linux versions, though they may run downrev from their
Windoze counterparts. If using Wine, you'll have to configure a serial
port as a DOS device (see
Why do I have the feeling I'll be waiting three hours at Dayton just to
touch the K-Pod?
On Mon, Apr 18, 2016 at 3:11 PM, Wayne Burdick wrote:
>
> On Apr 18, 2016, at 12:07 PM, "David Ferrington, M0XDF" <
> m0...@alphadene.co.uk> wrote:
>
> > Wayne, when you say control P3,
> We'll also be able to execute P3 macros directly from K-Pod switches,
> as well as use the K-Pod's knob to control the marker knob on the P3.
Does this include other P3 encoder functions like REF LVL, SCALE, and
CENTER?
73,
... Joe, W4TV
On 4/18/2016 1:40 PM, Wayne Burdick wrote:
To
I don't believe there are any Elecraft utilities that run on Linux. You
could likely get away with VirtualBox to run a Windows VM though.
On Mon, Apr 18, 2016 at 1:21 PM, David Davis wrote:
> I am curious what flavor of Linux everyone prefers with respect to being
> able
Ubuntu 14.04, 16.04 work well. So does Kali.
73!
matt, W6NIA
On 4/18/2016 12:21 PM, David Davis wrote:
I am curious what flavor of Linux everyone prefers with respect to
being able to run the Elecraft utilities for the KX3 and other
software related to amateur radio.
Thanks in advance for
I am curious what flavor of Linux everyone prefers with respect to being
able to run the Elecraft utilities for the KX3 and other software
related to amateur radio.
Thanks in advance for the replies.
David
KG6MTI
__
Elecraft mailing
On Apr 18, 2016, at 12:07 PM, "David Ferrington, M0XDF"
wrote:
> Wayne, when you say control P3, is that via the K3 or do you need to connect
> it directly to the P3?
Via the K3, i.e. the K-Pod would be connected to the K3, and the radio would
act as a proxy for
Wayne, when you say control P3, is that via the K3 or do you need to connect it
directly to the P3?
73 de David, M0XDF (K3 #174, P3 #108)
--
Since we are destined to live out our lives in the prison of our minds, our
one duty is to furnish it well.
-Peter Ustinov, actor, writer and director
On Apr 18, 2016, at 11:22 AM, j...@kk9a.com wrote:
> I did not know that P3 control was also possible with the K-Pod. Does this
> work using the standard cable connected to the K3S...
Yes.
Wayne
__
Elecraft mailing list
Home:
I did not know that P3 control was also possible with the K-Pod. Does this
work using the standard cable connected to the K3S or is an additional
cable necessary? Until last week I never realized that I wanted a device
like this.
John KK9A
Wayne Burdick n6kr at elecraft.com
Mon Apr 18 13:40:41
On Apr 18, 2016, at 11:14 AM, Bob Novas wrote:
> O! I really like the idea of the K-Pod controlling the P3 marker knob,
> that hasn't come up before. That's enough to swing my opinion to wanting
> one. How does that play with the 3-way switch? Bob W3DK
Hi Bob,
O! I really like the idea of the K-Pod controlling the P3 marker knob,
that hasn't come up before. That's enough to swing my opinion to wanting
one. How does that play with the 3-way switch? Bob W3DK
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On
Does anyone know if the K3S internal speaker can be assigned Sub receiver for
dual receive while the Main receiver is piped to an external speaker like the
SP3?
I currently have a pair of non-Elecraft external speakers plugged into the rear
speaker jack and the rig set for speakers = 2.
I love
To everyone who checked out the K-Pod at Visalia: Thanks for your enthusiastic
reception, and for all the suggested uses. There were lots of expressions of
surprise at how compact, yet heavy (and stable) this little critter is.
Some of your suggestions will end up in the K-Pod owner's manual,
The PR6 has been sold.
73,
Mike K2MK
Mike K2MK wrote
> I have my own personal PR6 for sale. It includes the two male to male BNC
> adapters, the 12 volt power cable that plugs into the K3, the 15 pin
> accessory plug that plugs into the K3 accessory socket, and the
> instruction manual. It's in
I'm looking at getting a Pan adapter of sorts in the near future. I like
what I'm reading about SDRPlay but since I use a Raspberry Pi to interface
my K3S I'm not sure on what software is available for that platform. Their
website is a bit vague on it.
Is anyone currently successfully using SDR
Testing the new amplifier then... :-)
73 Stephen G4SJP
On 18 April 2016 at 15:34, Eric Swartz - WA6HHQ, Elecraft wrote:
> There is a massive power outage this morning covering the industrial park
> where Elecraft HQ is located. Phones are currently off-line for our sales
I am interested in a way to remotely power on a k3 or k3s without the remote
rig boxes. Nice apps already exist to remotely operate the kat500 and kpa500.
Any suggestions?
Why? Remote operation of my second k3 for digital modes.
Assistance appreciated.
Randy
There is a massive power outage this morning covering the industrial park where
Elecraft HQ is located. Phones are currently off-line for our sales and support
team. We will also be delayed replying to emails today. (All emails sent to us
will still be stored at our off-site ISP.
Our web page
ELECRAFT K3/100, SN 7179, and P3 w/SVGA, SN 2970
Main Receiver has 2.8 and 1.8 filters
KRX3 Sub Receiver with 2.7 filter
KXV3A for IF Out and XVTR Interface
KIO3 I/O adapter
KDVR Digital Voice Recorder
NO ATU! (I used my KAT500 which is not for sale)
Nifty K3 manual, Nifty P3 Manual
Raytheon
I have my own personal PR6 for sale. It includes the two male to male BNC
adapters, the 12 volt power cable that plugs into the K3, the 15 pin
accessory plug that plugs into the K3 accessory socket, and the instruction
manual. It's in perfect operating condition. I no longer need it as I am
moving
40 matches
Mail list logo