Your email has been received at ...@ph0ppl.nl, please note that this email
address is no longer used.
Please remove it from you administration and use ph0...@outlook.com instead.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out
Your email has been received at ...@ph0ppl.nl, please note that this email
address is no longer used.
Please remove it from you administration and use ph0...@outlook.com instead.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out
without use of the UCB - just relays.
Peter, G3LWT
PowerSDR 1.4.4, Delta 44, 3.4GHz,1GB, RFE, no
PA.
these ramblings are of use in helping
someone stuck with the same problem, but I would like comments from our hardware
and sortware gurus.
Peter G3LWT
from the palette.
To overcome the problem, I reselected basic colours
from the boxes, saved the selections into the "old" .mdb file, and overwrote
this file into Beta 11, which then worked fine. Comments??
Peter, G3LWT
Acer1714 Notebook, 3.4GHzP4, 1GB, NVIDIA G-Force FX
Go5200/5700,XP Home, Firebox
the database file, all is
well. Of course, when major aditions are made to the database, a re-edit of the
new version is necessary, but at least this method reduces the pain somewhat.
Note also that WWV is useless in Europe at present, I always use RWM.
Peter G3LWT
Am mostly a CW man, studying possibility of buying the SDR1K. There are so
many outstanding features in this rig. Am seeking more information on CW
behavior of the SDR1K and solution paths. Would like comments on any one or
all of the following points:
1) Out of the box, with no
. Is there a documented way to
change the samplerate programmatically, and can than do 8kHz?
I have lot's more questions. If there's someone out there who has already
cracked the Firebox and could spare the time to help shorten my learning
curve, I would be grateful.
73
Peter G3PLX
if, in the PowerSDR package, the end user who is
installing a Firebox is forced to set it up with the Firebox Control Panel,
or if PowerSDR knows how to do it itself? If it can be done without the
Firebox control panel, then there's hope still. I didn't get any reply from
[EMAIL PROTECTED]
73
Peter
steps on both receive and transmit.
I wonder what other people have found with soundcard samplerate behaviour.
73
Peter
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link
someone
has added a checkbox to turn this sort of test feature on and off and see
what, if any, is the difference in the speaker.
73
Peter
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
Peter
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com
, or are we buying 24-bit cards because the
manufacturers want us to spend more money.
73
Peter
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://mail.flex
to see if it makes any difference. To take
Frank's point, as far as I can see from both the ASIO and WMME interfaces,
there IS an accessible point in the software where this can be done before
the audio data becomes floating-point.
Thanks to all who replied.
73
Peter
surely override him, especially if the competition were
all actively marketting so-called 24bit cards!
73
Peter
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http
soundcard bandwidth for this to make sense - it will look a lot cleaner if
you select a narrow filter. I am not familiar with the SDR software so I
don't know how this works.
73
Peter
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex
did get one recently, I was
surprised to find this wasn't the case. Jim is right. 24 bit cards may only
be slightly better than 16-bit cards. I have learned something this week.
73
Peter
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http
SDR software could be patched to implement
zero-IF, or my own zero-IF software could be run in parallel on another
soundcard. Would anyone like to have a go?
73
Peter
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz
Peter
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com
.
73
Peter
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com
Zero-IF idea elsewhere.
73
Peter
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/
FlexRadio Homepage
Chirpsounders up the spectrum at 100kHz/sec, but not
for tuning steps.
73
Peter
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://mail.flex-radio.biz/pipermail
but a
demonstration of a possibility. I hoped I could send this to the reflector
so that others can listen to it, but this may not be possible. I can email
it to anyone who would like to hear it.
73
Peter
___
FlexRadio mailing list
FlexRadio@flex
noticed it before. There's a '+12dB gain' button on the control panel. Guess
what it does? Guess where I had it set the first time I checked? It's not a
12dB pre-amp, it's a 2-bit good-for-nothing left-shift!
73
Peter
___
FlexRadio mailing list
modes.
I recommend extra ferrites on the power cable if you use the AC power supply
for the 1700, single point earthing for all units, good quality firewire cable
and physical separation of PAs to reduce risk of RFI problems.
Peter, G3LWT
-- next part --
An HTML
features and play down those not of interest at the time -the selection
available is not just to look pretty. This feature is another of the plus
points of the radio.
Peter, G3LWT
--
Message: 6
Date: Thu, 5 Oct 2006 22:49:52 +0300
From: Ahti Aintila
Subject: Re
The site doesn't seem to do much of anything.
On 10/23/06, Eric Wachsmann [EMAIL PROTECTED] wrote:
I don't know off hand, but I'm guessing that there are some on the
flex-radio-friends.net site.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED]
If you had your heart set on picking up a new SDR-1000 and accessories at
Dayton, read on.
Have a new, still in the box, SDR-1000. Also, have new and unused, the
important accessories. Bought this second one at Dayton in 2006. Finally
opened the SDR -1000 carton on April 25, 2007, just to confirm
It might be interesting water-cooler fodder if the members had some idea
what the typical production run quantity is. I don't recall seeing a
number in past posts but maybe I missed it. It might also be interesting
for the wow effect, what approximate percentage of existing SDR-1000
users are
was only
carrying out setup tests into a dummy load at 15W CW when the trouble started.
Its under investigation - maybe both hardware and software problems here.
Peter, G3LWT
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail
for other countries/regions? I can't use 60m in the way
intended in the UK until this is done.
Thanks
Peter, G3LWT
Eric Wachsmann [EMAIL PROTECTED] wrote:
Peter,
The issue we are seeing here is related to extremely high or low readings
when transmitting, but normal readings can be seen
repeater.
Seems we have a way to go with both programs yet - but it is promising!
Peter, G3LWT.
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071209/6a5297b8/attachment.html
Hi all,
Havn't seen any response yet to Frank's (OZ0FT) problems from the experts. I
had similar problems in the past which I solved so may be able to help. As this
is a bit specialised, best if you contact me off list Frank.
73, Pete G3LWT
___
Having both a 756 PRO II and 5000 side by side, I can compare them on a
daily basis. The spectrum scope on the PRO series is probably one of the
most useful features on a model of this type. However, unlike the 5000,
the 756 PRO series spectrum scope is not a point and click scope, so
it's
I have set up SDR using MixW with no trouble. I like HRD, but I am having
troubles setting it up. It works well on recieve, using either the PSK31
within HRD or the DM870 module, but does not connect on transmit. I suspect it
is a problem in setting up the proper COM Ports in VCOM. Exactly
As the VAC website suggested I downloaded the demo version to be sure it would
work on my machine. It did, and so I purchased it. But when I tried to
uninstall the Demo vesion something went wrong and it did not completely
uninstall. I cannot now install the purchased version.
Eugene
I posted a query concerning my problem uninstalling the demo VAC last evening.
I received three responses quickly, all good advice. Fortunately I did not have
to go into a full manual uninstall. Although Tim's excellent suggestion to try
a install of the full vesion under Safe Mode did not
I am using the 5000A trying out MixW and it seems to be working well. One
thing I notice, however, is that the frequency it reports is about 2 kc off.
From what I have read I supect it has to do with my particluar soundcard. Since
the soundcard in a notebook (I am using the Dell XPS M1730)
Steve,
Thanks. That did it!
Pete
- Original Message -
From: Steve Kallal [EMAIL PROTECTED]
To: 'Peter Spader' [EMAIL PROTECTED]; flexradio@flex-radio.biz
Sent: Friday, May 09, 2008 7:30 PM
Subject: RE: [Flexradio] MixW Frequency
Pete,
Go to Setup | CAT Control. Check DigL/U
I have decided to try the Shuttle Pro 2 with my 5000A. The quick Start guide
refers to a spreadsheet of keyboard shortcuts at:
www.flex-radio.com/keymap.xls
It does not seem to be there anymore and I cannot find it abywhere on the
Flexradio site. Does anyone know where it is now?
Thanks
Thanks Ken and Dale! I have it now.
Pete (K2HGO)
- Original Message -
From: Peter Spader [EMAIL PROTECTED]
To: flexradio@flex-radio.biz
Sent: Saturday, May 10, 2008 9:25 PM
Subject: [Flexradio] Shuttle Pro 2 Keyboard Shortcuts
I have decided to try the Shuttle Pro 2 with my 5000A
Jim,
Good points. At a more basic level, as a new user of a Flex 5000A I have
posted a number of queries. In each case I did check the kb and use the kb
Search first. But when that fails I will query here and will, if all else
fails, call support.
I know it is sometimes a boring burden to
Larry,
I am using a new Dell M1730 XPS notebook running XP Professional (I think
Dell still has them with XP). It does have a 4 pin Firewire connector but I
find the 6 pin to 4 pin cables work well, as does a 6 pin to 4 pin adapter I
got from Radio Shack. It also has a CardBus slot and so I
Alan,
I use a Heil Pro Set Plus HC4 element and the DX/Contest EQ setting on the
console. Stateside stations have told me it sounds great for DX with good
punch. And it works. I got Randy V73RY in the Marshall Islands on 20 SSB
during his last hour of operation before he left for the mainland.
Hi Mike,
I have used both the adapter and dedicated 6 pin to 4 pin cables. Both
work. Yes, I would add RF chokes. RF on that line can cause all sorts of
problems.
Although my laptop built-in Firewire port worked fairly well, I finally
decided to add a new expresscard Belkin Firewire adapter
I have found the keymap settings useful for most of the functions I want, but
cannot get the AF gain settings (- and +) to work, and do not even find any
settings for AGC-T level. Anyone know the keystrokes for tthese functions?
Thanks.
Pete (k2HGO)
Thanks Bret (and Rob as well) for helping me. I was trying to use the keyboard
rather than the Numeric keypad.
And yes, I would like to see your improved keymap Bret, though at present I
have things set the way I want them for a start.
Indeed you may want to make it available to everyone.
I have been having a great deal of fun just using my 5000A the last few months
after getting everything working well with my Notebook Computer. (Incidentally
although things work o.k. with the built in Firewire Controller I did finally
get a Belkin Expresscard which was well worth it.)
But it
To all:
I set up an order process directly on my web site for obtaining the high
resolution, all in color, latest version, laser printed operating
manual. Just go to http://www.manualman.com Click on Search Our Online
Catalog (upper right of screen). Then look to the right side of the
screen Other
Gerald,
Great news. I love my 5000A, but especially in today's economy many hams
may not be able to afford it. The more hams who can begin to experience the
fun of FlexRadio SDR the better we all will be. Just hope you and FlexRadio
can find enough good new people or you will loose the 2
Panadaptors make it easier, but this technique has been used by DXers long
before we had panadaptors. As a smsall pistol running barefoot with a wire
antenna at 25 feet (a good one, a Carolina Short 40)
I rarely call right on top of the last call, but rather off to the side a
little. What
Hi,
I am using the Belkin Firewire 400 Expresscard Part # F5U505. See
http://catalog.belkin.com/IWCatProductPage.process?Product_Id=277548
I got it from the Superwarehouse at:
http://www.superwarehouse.com/Belkin_FireWire_Express_Card/F5U505/p/1483814
I use it on my Dell XPS M1730 with a 3
Since I've sent out a number of these over the last 1.5 months, with
hopefully ample time for use and review by most, I thought I'd ask for
some feedback on the overall quality of the printed product. So, if there
are any comments, good, bad, what you liked, disliked, etc., please pass
them along
Hi All,
Offered for sale initially in EU (because of sales tax paid):
Universal controller board, built and tested, works directly with SDR-1000 X2
socket outputs, not used as SDR 1000 was sold. Fifty pounds sterling + post at
cost.
HPSDR boards Atlas, Ozy, Janus and 120W picoPSU Atlas built
Hi All,
The UCB has been sold. Thanks for your interest.
HPSDR Boards still available, - contact me off list if interested
Pete, G3LWT
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Al,
I was the last one to post a review (positive) on eham. I did so after I
felt I had something to add to what had already been said. Perhaps many
people do not want to simply repeat what others have said no matter how good
it is.
Pete (K2HGO)
- Original Message -
From: [EMAIL
In the spirit of the holiday season, the Flex-5000 Series current, full
color, high resolution, printed operating manual has special sale pricing
from 12/4/08 through 12/31/08. The special pricing applies to all manuals
regardless of the type of binding. Go here, http://www.manualman.com and
look
Bob,
Thanks for the update.
The Flexradios and PowerSDR just keep getting better and better. Thanks to
all the people who are making this so.
Pete (K2HGO)
- Original Message -
From: Bob McGwier [EMAIL PROTECTED]
To: flexradio@flex-radio.biz
Sent: Saturday, December 06, 2008 5:39 PM
Just a reminder that there's roughly 3 days left in this special
pricing sale.
Pete, wa2cwa
- Forwarded message --
From: Peter Markavage manual...@juno.com
To: flexradio@flex-radio.biz
Date: Thu, 4 Dec 2008 00:33:12 -0500
Subject: Operating Manual
In the spirit of the holiday
Robert,
There is one potential problem with laptops. Some of them have relatively
poor Firewire controllers. My Dell XPS M1730 has a decent one, but when I
used a long firewire cable (3 meters) I had some instability. When I added a
Belkin Expresscard Firewire controller it calmed down
And thanks to you and everyone else that has contributed to these wonderful
rigs and software. I have not had so much fun in ham radio since I was
youngster building my own first rigs. As I ended my eham review of the 5000A
SDR is the future and it is now here! And it is great fun.
May 2009
Ruben,
There is a good article in the Flexradio Knowledge Base at:
http://kc.flex-radio.com/KnowledgebaseArticle50179.aspx?Keywords=Firewire+cards
I use the Beldin Expresscard in a Dell XPS M1730 running XP professional and
it works well with a 3 meter Firewire cable.
But there are a lot of
that it is
assumed present when the PA is confirmed as installed ?
BTW my hardware is a trusty old 1000.
Cheers,
Peter.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
Received a number of queries as to whether I'm going to bring any of the
high resolution color printed operating manuals for the Flex 5000 series
to sell at Dayton this year. Given the size and time required to print
these manuals, I will only bring manuals that have been ordered and
prepaid. The
To all:
I accidently omitted several lines in my original post. If you want me to
bring Flex 3000 or 5000 operating manuals to Dayton, don't order from the
web site. Send me an e-mail ( manual...@juno.com )and I'll e-mail you an
invoice. The web site order processing automatically computes
Greenbaum n...@myfairpoint.net
To: Peter Spader pspa...@comcast.net
Sent: Wednesday, May 06, 2009 4:37 PM
Subject: Re: [Flexradio] Odd MixW problem.
Peter,
there is a bug in 1.18.0 when trying to transmit via the cat command.
There are two ways around it one is to implement ptt via another
To all:
Just a reminder to all who ordered Flex 3000 and 5000 full color
operating manuals for pickup at Dayton. My outside space numbers are
1960-1961 which is on the West side of the flea market area. I am also on
a corner so I'll be hard to miss unless you're totally dazzled by all the
flea
Brian,
Altough the bands are poor I have occasionally overloaded my system and had
the receiver drop to a very low level. ( I found on SSB I need to set the
delay on VOX to 500 or else the transients on turnover would cause the
problem if I was pushing too close to overload).
I would do a
At this time, all people who ordered Flex 3000 and 5000 full color high
resolution operating manuals at Dayton should have been them delivered to
you by USPS. If for some reason you believed you ordered a manual and
haven't received it, please drop me an e-mail, or visit my web site.
Please
Harold,
created while I w
I bought my 5000A over a year ago, and I did have some dropouts at first,
but once I got a Firewire Expresscard for my Dell XPS 1730 laptop most of
them disappeared (and I am using a 3 meter long firewire cable.) Many
problems reported here are caused by people who
Gerald,
Sounds great to me. This makes clear the difference bwteen the experimental
SVN and the Offical Release, and allows support to focus on where it is most
needed---to get people up and running on their Flex radios. Also, as has
been pointed out, the experimental versions are, by their
Nice demothanks.
My question... can't this be done in SW internal to the flex and
PowerSDR? Hint Hint Eric...et al.
Pete WA2ODO
Anthony M wrote:
I have as promised created a second video showing the use of the MFJ 1025 Noise
Canceller and the Flex 3000 radio.
This is part one of a
Tim and Lee,
I also agree with this...I am going to stick with the XV144
transverter. I think the price is rather high for this...much higher
than was originally estimated. I am sure it is well worth every
penny...but just too much to spend for what it yields. So also take me
off the
You'll probably get a hundred different opinions about how to do
power... I chose to ignore what most hams are doing with the tiny
power poles and used these instead: I used yellow for 12V.
http://www.powerwerx.com/anderson-powerpoles/powerpole-sets/sb50-sb-series-50-amp.html
They are higher
. Not everybody has this problem, maybe I got a
bad batch or something, but I like the big ones, you really have to
man-handle those to get them apart.
On Mon, Mar 22, 2010 at 2:35 PM, Brian Lloyd brian-wb6...@lloyd.com wrote:
On Mon, Mar 22, 2010 at 10:56 AM, Peter Pauly ppa...@gmail.com wrote:
You'll
It was I who made them for the group. I currently have 2 available one
with the BNC's for the flex at .25dbnf/22.27dbg ($75 + shipping)and a
second with N connectors at .39dbnf/22.30dbg ( $60 + shipping).
Pete WA2ODO
On 4/26/2010 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Send
Tim et al,
Is the Flex 5K with V/U modules installed capable of supplying 12VDC
to antenna mounted pre amps? If not, is this a future objective?
73,
Peter, NH6VB
From: telli...@itsco.com
To: n...@charter.net
Date: Sun, 16 May 2010 15:41:54 -0400
CC: flexe...@flex-radio.biz; FlexRadio
) $7000.00+ radio. Would you like to
put a model T type engine hand crank on a corvette?
73,
Peter NH6VB
Date: Tue, 3 Aug 2010 18:36:45 -0400
Subject: Re: [Flexradio] Satellite Users
From: brian-wb6...@lloyd.com
To: nh...@msn.com
CC: FlexRadio@flex-radio.biz
From: Peter Scheller [mailto:nh
radio system to have Radio e-mail. If that would be possible,
that would
be wonderful and worth the purchase of a Flex 300 by itself. Food for thought.
In summary, it is not, and was not my intend to knock Flex radios, but point
out
the shortcomings for my intended use.
73,
Peter, NH6VB
Date
Tim,
I was rather thinking of connecting the output of the (my) SCS modem
to the Flex and have the best of both worlds. Also in maritime mobile
application, it sure would enhance e-mail access, given the superior attributes
of the Flex system.
Just thinking out loud.
73,
Peter NH6VB
get no answers
73,
Peter, NH6VB
Date: Wed, 4 Aug 2010 12:47:19 -0400
From: rjl...@gmail.com
To: telli...@itsco.com
CC: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Satellite Users
You're right and makes sense to me. The fewer moving parts the better I
always say.
Rick
W2JAZ
I've posted a evaluation of the 1500 under contest conditions at my blog
www.ve3hg.wordpress.com
All in all, it worked pretty well in last weekend's CQP.
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
___
FlexRadio Systems
Hi Tim,
No offence taken and point well made. I will make a mention of your comments on
my blog while I'm saving up for a quad-core :)
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
--
Message: 24
Date: Tue, 05 Oct 2010 10:45:06 -0500
Got my 1500 rig control working with Writelog despite Windows 7 :)
Read all about it on my blog at VE3HG (www.ve3hg.wordpress.com)
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
___
FlexRadio Systems Mailing List
FlexRadio@flex
I'm reading everything I can find but haven't found an answer yet to audio
dropping out every few seconds. Must be something in Windows 7 that's running
in the background? Any thoughts appreciated.
Running Flex 1500, Windows 7, HP PC. Didn't have this issue yesterday!
Best regards,
Peter
module I needed for the weekend QRP test.
Any thoughts on how to proceed? Any less demanding contest logging program or
is it time for a new computer??
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
___
FlexRadio Systems Mailing List
The journey continues with the Flex 1500 and Windows 7.
Read about it on my blog at www.ve3hg.wordpress.com
Progress is being made...slowly :)
Thoughts - comments - suggestions all welcomed.
73,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
Power SDR v2.0.16 ROCKS! Now have CW from my key on my 1500 :)
What wonders are there to come? Fabulous guys. Thank you.
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
transmitter
through HRD or other software. Anybody done it? Might save me a $5K hardware
future upgrade :)
Now have Writelog keying the 1500. Next step is rig control from Writelog.
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz
directly into the sound
card (which I can hear on the computer headphones) and still nothing from the
readers.
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
Can I wire the I/O port on the back of the Flex 1500 to an on-off foot switch
for use in voice contests?
Should be able to add an external VOX box in the mic line? Right?
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
on the ohm home front for a new more robust Windows 7
machine.
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
CW contest
which was amazingand then there's the crackling noise.
Need an answer on this one :(
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
quiet - no crackling.
However the 2 gigs RAM in the E-Machine don't seem sufficient for clean CW.
I'll try more RAM but it's looking more and more like a new computer :(
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
___
FlexRadio
. Again
I'm learning and that's the point.
Thanks again to all who commented so quickly.
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
On 2010-12-05, at 8:31 PM, Tim Ellison wrote:
If the intermittent crackles co-inside with DPC spikes, then you need to
figure out what
the audio. Not a big issue and copying CW in my head
is getting better faster :) Not sure about accuracy yet.
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
to everyone.
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com
.
Best regards,
Peter - VE3HG
VE3HG Blog
Follow VE3HG On Twitter
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex
direction ?
BTW OS is Windows XP SP3
Tnx,
Peter
(G1FXE)
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz
1 - 100 of 345 matches
Mail list logo