Dale writes:
I was hoping for something like a man page or something tho. I would
like to read up on this a little before jumping in head first. Does it
have a little info on screen on what does what at least? I think the
edit screen does but not sure about this part.
Grub comes with a
Arnau Bria writes:
I'd like to install mcollective and developer provides its ebuild.
so I've followed http://en.gentoo-wiki.com/wiki/Overlay for adding a
local overlay.
*I had a problem when adding
source /usr/local/portage/layman/make.conf to my make.conf. That file
does not exists and
Dale writes:
I'm no expert on this package so take this with a grain of salt. Mine
just updated and portage said to run emerge @preserved-rebuild which
I did. Thing is, one of the packages failed to emerge so here I sit.
The error says something is missing which is the same reason the
Tanstaafl writes:
On 2010-09-01 5:18 PM, Alex Schuster wo...@wonkology.org wrote:
I think it's not an urgent problem when this happens. With portage
2.2 and the preserve-libs FEATURE,
You are assuming everyone runs unstable portage??
No, but I replied to Dale, and he apparently does
Pau Peris writes:
Hi, after following your tips the code gets like the following one:
SUBSYSTEM==block, ATTR{serial}==VNVB05G2RKTRZH, NAME=hda
SUBSYSTEM==block, ATTR{serial}==9QK0T4WM, NAME=sda
SUBSYSTEM==block, ATTR{serial}==3QD0X58D, NAME=sdb
SUBSYSTEM==block, ATTR{serial}==9QK0RS9G,
Al writes:
2010/8/23 Paul Hartman paul.hartman+gen...@gmail.com:
confcache
configure knows the option `--cache-file=file':
http://sources.redhat.com/autobook/autobook/autobook_14.html#SEC14
Does emerge make use of it? Is there a way to tell emerge to use it,
without writing an overlay
Dale writes:
P. S. Any way to label swap? It's not reiserfs or ext*.
mkswap hast the option -L for this.
Wonko
Dale writes:
It would be nice if something like *fdisk could edit the labels tho.
It would be so much easier. I didn't see anything in the man pages
tho.
I'd like this, too. cfdisk displays them, but is not abel to edit.
I looked into LVM a good while ago. It's just to much for me to
Dale writes:
Hmmm, I use resierfs for my file systems, most of them anyway. I still
use e2fsprogs to change those?
No, but you can use reiserfstune -l.
Is there a way to boot a Gentoo/Knoppix CD and make it use the PATA
drivers? That way I can boot it and see exactly how it will name them
Aaron Bauman writes:
I bought a new Toshiba T215D-S1150 with a AMD Athlon II Neo
Processor. I am currently having issues with the livecd not booting.
Everything seems to get stuck on an NeT RPC error while the kernel is
booting. I was able to successfully install Ubuntu (Netbook Remix
I wrote:
Mick writes:
From KDE-4.4.4 the start up interferes with the hard drives:
http://thread.gmane.org/gmane.linux.gentoo.user/232044
I don't why but it does, messes up any settings that hdparm may have
set up and p*sses me off. o_O
As soon as KDE starts up (even when
Kevin O'Gorman writes:
This problem is repeatable on my system, so I probably borked it
somehow.
I know this effect, this happens from time to time. At the moment it is
working fine, but I got used to killall kdm when the init script did not
work. It did not bother me too much, so I did not
Mick writes:
On Sunday 22 August 2010 22:39:47 Alex Schuster wrote:
BTW, my two additional drives spin up when I log into KDE. Weird,
they are not even mounted.
From KDE-4.4.4 the start up interferes with the hard drives:
http://thread.gmane.org/gmane.linux.gentoo.user/232044
I
Stroller writes:
On 22 Aug 2010, at 22:39, Alex Schuster wrote:
Stroller writes:
The script with which you reply is missing the sleep 60 loop.
No, it's only the script that outputs the drive's state. It's called
by ~/.kde4/Autostart/hdstate:
#!/bin/bash
while :
do
/usr/local
Alan McKinnon writes:
Apparently, though unproven, at 15:25 on Saturday 21 August 2010, Alex
Schuster did opine thusly:
There is a nolog option for fcrontab, but I still get this output
every minute:
That will tell fcron not to log stuff.
It will not tell other apps to not stuff
Right
Tamer Higazi writes:
For a project I need to create ssh accounts (based on shared keys) who
would be loged in a specific directory. They should only be able to
login in the desired directory, but not be able for outside browsing.
If you need this only for things like scp, net-misc/scponly
Mick writes:
The chrony installed logrotate script keeps erroring out:
logrotate_script: line 5: warning: here-document at line 2 delimited by
end- of-file (wanted `EOF')
Unrecognized command
Stroller writes:
On 21 Aug 2010, at 14:25, Alex Schuster wrote:
...
I want to monitor the power status of my hard drives, so I wrote a
little
script that gives me this output:
sda: standby
sdb: standby
sdc: active/idle 32°C
sdd: active/idle 37°C
This script is called
cov...@ccs.covici.com writes:
Hi. I am running the unstable gentoo 32-bit and today I emerged --
amoung other packages in a system update -- glibc-2.12.1-r1, however
after doing this at least one package had an undefined reference to
S_ISCHR. I tried to downgrade glibc, but apparently this
Xi Shen writes:
i got this error while trying to emerge the open-iscis-2.0.871.3:
be2iscsi.o transport.o iscsid.o
iscsi_sysfs.o: In function `iscsi_sysfs_get_blockdev_from_lun':
iscsi_sysfs.c:(.text+0xe71): undefined reference to `S_ISLNK'
iscsi_sysfs.c:(.text+0xed3): undefined reference
Stroller writes:
The script with which you reply is missing the sleep 60 loop.
No, it's only the script that outputs the drive's state. It's called by
~/.kde4/Autostart/hdstate:
#!/bin/bash
while :
do
/usr/local/sbin/hdstate ~/log/hdstate.log
sleep 10
done
Running a script
Dale writes:
I'm wanting to install the latest KDE 4.5 which is in the kde overlay.
I got everything unmasked, keyworded and ready to go. Since this is a
large upgrade and will take some time to compile, I would like to just
build the binaries then come back and install them when the
Hi there!
I want to monitor the power status of my hard drives, so I wrote a little
script that gives me this output:
sda: standby
sdb: standby
sdc: active/idle 32°C
sdd: active/idle 37°C
This script is called every minute via an fcron entry, output goes into a
log file, and I use the file
Zhu Sha Zang writes:
Hi there, why this command don't work in zsh:
[...]
[r...@sakurazukamori /usr/src/linux]$ emerge --config
=sys-apps/tomoyo-tools-2.2.0_p20090727
9:44
zsh: sys-apps/tomoyo-tools-2.2.0_p20090727 not found
Interesting. Looks like zsh treats a '=' character specially. I
Wow, what's going on here?
Alan McKinnon writes:
Like Eskimo's with 20+ words for different kinds of snow.
Say snow to any Eskimo, see what happens :-)
Actually, they have only two words for snow: qanik for falling snow and
aput for lying snow.
Wonko
dhk writes:
I don't understand why it just started to be a problem. I've had this
kernel for almost four months. Shouldn't the log's be rotated and
purged?
Depends on your system logger. Metalog does this automatically, but for
others you probably have to install logrotate.
Wonko
Maximilian Bräutigam writes:
You should backup all in / except
/tmp/*
/sys/*
/proc/*
/lost+found/*
/dev/*
Attention here, you need at least the null and console entries in /dev, or
the system will not come up. I also have tty and tty1 in there, I think
those were neede for tuxonice.
Mark Knecht writes:
Here's the setup: My desktop machine is a new, fast Core i7 980x
processor. It is capable of doing emerge -e @world (including XFCE4,
Gnome and KDE) in around 4 hours. On the other hand my MythTV backend
Oh my, this is fast.
server is an old PowerPC which takes
Nganon nganon+gen...@gmail.com writes:
Hello all,
My first post on the list. I thought I would start with something
that I started
to think of as 'essential' after losing 90GB of data. Now I have two
main questions in mind: what to and how to back up on gentoo most
efficiently.
1.
Massimiliano Ziccardi writes:
I'm trying to update my gentoo after a long time.
That tends to be more problematic than regular updates.
I tried the update (emerge -uD world) but I got some problem about
conflicting and missing libraries, so I've uninstalled some software.
portage 2.2 may
sam new writes:
any one help?
Yes, google. With 'rootfstype=ext4 initrd genkernel' the first hit shows
bug #221245 (rootfs is incorrectly mounted as ext2). I assume you have
ext4 compiled as module?
Wonko
Petric Frank writes:
All hints are welcome.
I had weird effects when I had forgotten to set the sticky bit on /tmp.
ls wo...@weird ~ $ ls -ld /tmp
drwxrwxrwt 16 root root 4096 11. Aug 10:48 /tmp
If this ^ t is missing, do a chmod +t /tmp, and try again.
Wonko
li...@gabriel-striewe.de writes:
I was wondering whether there is some way to find out the current
running softlevel (which I gave to the kernel line in grub's
menu.lst), for example to start another window manager depending on
the softlevel or whatever other possible solutions? Maybe in a
Mark Knecht writes:
Is there an option in emerge to download and create the source code
tree for an application, but then stop at that point, don't build the
app and leave the source code tree in place so that I can look at it?
Probably not. But you can use the ebuild command:
ebuild
Florian Philipp writes:
I'm building a new Gentoo system (notebook) and want to rearrange a few
things. I thought it would be good to have the following layout:
- boot on a normal partition
- root on a normal partition
- one big encrypted partition (dmcrypt / LUKS)
- on that partition
Xi Shen writes:
after i enabled bash completion for rsync, i got this error when type
TAB to auto complete the file name
bash: _known_hosts_real: command not found
it used to work very well. do i missed something?
Maybe googling :) Does this help? http://bugs.gentoo.org/301632
Michael M writes:
Hello list, I need to install Cairo bindings for dev-lang/php-5*. Is
there a pecl-cairo overlay for ~x86? I've tried unmasking this
package and adding the keyword ~amd64 and it seems to want to install
with emerge but my system is ~x86.
According to this site it is only
Matt Harrison writes:
Just wondering if anyone has any experience with courier-imap serving
mailboxes over NFS. From googling around it seems courier should
support remote homedirs but I can't get it working.
My user authenticates according to the logs, but the client reports
invalid
Volker Armin Hemmann writes:
I went down the bl2/openrc path a long time ago and there were some
unpleasant moments. But overall it was ok.
I had no trouble at all, but I may just have been lucky.
At the moment 'devfs' needs almost a freaking minute to start and I
have no clue why.
walt writes:
On 07/28/2010 01:20 PM, Andrey Vul wrote:
Creating files in /tmp, /etc, /lib32, and /var return ENOENT (touch
/tmp/foo = strerror(ENOENT)).
However, this is done as root and the dirs are marked 755 root:root.
Are all these directories located on the root file system?
Is
Neil Bothwick writes:
On Mon, 26 Jul 2010 01:46:23 +0200, Alex Schuster wrote:
Or just right click on the K thingy and select menu editor.
Yeah, it's right there in K - Programs - Settings, but only because
I put it there, with kmenuedit.
Dale was referring to RIGHT clicking the K
pk writes:
Ok, thanks for the feedback. I've been waiting for the open source
drivers to mature so that I can rely on them for my needs (incl.
gaming). Perhaps it's time to check them out... But, again, since I've
been running the ati-drivers-10.6 for a couple of weeks without
problems (that
Peter Humphrey writes:
On Monday 26 July 2010 16:13:19 Mick wrote:
On 26 July 2010 15:11, Peter Humphrey pe...@humphrey.ukfsn.org
wrote:
So udev is wrong in saying CONFIG_IDE should not be set - on that
old P4 box it has to be to get ICH4 drivers.
Hmm, did you try ATA_PIIX, or
Kevin O'Gorman writes:
I'm using KDE 4 on Gentoo, and I want to add a few items to the K
(application launcher) menu.
I thought the control center was the thing to use, and the online help
manual says it should exist on the K menu, or as the program
kcontrol.
That's how it was called in KDE
Dale writes:
Alex Schuster wrote:
Kevin O'Gorman writes:
I'm using KDE 4 on Gentoo, and I want to add a few items to the K
(application launcher) menu.
I thought the control center was the thing to use, and the online
help manual says it should exist on the K menu, or as the program
Nikos Chantziaras writes:
On 07/22/2010 12:56 PM, Andrea Momesso wrote:
That's impossible, isn't it?
I think so.
Swithcing profile and reemerging everithing isn't gonna work? Even
from a chroot?
Should I reinstall a new stage from scratch? Adobe stopped providing
flash for linux
Hilco Wijbenga writes:
I would like to do remote pair programming with somebody on a
non-Linux box. It seems that NoMachine NX or TightVNC would allow me
to do so. Great.
I prefer NX over VNC because of its efficiency, and because it is more
intelligent, but I think it has no mode to let two
Hilco Wijbenga writes:
On 22 July 2010 16:08, Alex Schuster wo...@wonkology.org wrote:
I prefer NX over VNC because of its efficiency, and because it is
more intelligent, but I think it has no mode to let two people
access the same session at once. So I (being remote) tried starting
Allan Gottlieb writes:
I am unable to umount /usr in single user mode on an old system.
I believe the system is baselayout-1 and is amd64.
The trouble is open files, at least some of which appear to be related
to bash and locale (see the files below).
I use grub. On the kernel line can I
Helmut Jarausch writes:
I'm trying to find out why I get a configure error (on one machine)
./configure: line 14859: test: too many arguments
Looking at this line it shows
if test $ax_python_header != no; then
So, how can I find out the value of $ax_python_header.
Putting some
I wrote:
Here's a list of my current KDE bugs. There are many, fortunately most
of them are really minor issues.
[58 KDE bugs]
I forgot two. kio_thumbnail does not seem to save the results, and scans
folders again, causing loads of 20. And the password dialog when the
screen was blanked
SpaceCake writes:
So, it solves the first problem, identifiying the device, but how can I
tell to udev to use always /dev/sds (for example) for this device?
I think, you can's. But you can add SYMLINK=swap to make the device
appear as /dev/swap, too.
Also I'm thinking how can I instruct
Thomas U. Nockmann wrote:
On Wednesday 23 June 2010 Alex Schuster wrote:
[...]
Hello,
But /etc/init.d/capi fails to start, when calling 'capiinit
activate': ERROR: cannot open /dev/capi20 nor /dev/isdn/capi20 - No
such device or address (6)
I'd got the same message while setting
Neil Bothwick writes:
On Wed, 30 Jun 2010 01:16:44 +0200, Alex Schuster wrote:
I did not want to use Chromium, but I tried it, and I must admit,
it's fast, and it uses much less memory than konqueror. And it even
has web shortcuts, which are a must-have for me now. What I'm
missing most
Chen Huan writes:
I had done some hack on jabberd2, and I make a new ebuild for it, To
avoid the new ebuild being overwrite when I execute emerge --sync, I
make /var/lib/layman/myown for this ebuild
when I emerged jabberd2, it's normal, but when I try to re-merge it,
the output is :
mailinglist...@gmail.com wrote:
My x is a bit slow. Lets say I have a minimized
web browser with a page with pictures and text.
If I maximize it, the drawing of the page and
the widgets doesn't happen instantly, but it
takes a moment.
Is there disk activity when this happens?
Wonko
Mateusz Mierzwiński writes:
I have KDE4. It work's perfect.
Whooo, now at least this sounds good!
Try set Custom-cxxflags to off,
maybe this will help. From my opinion KDE and QT 4 don't like
customized C/CXX Flags, such as fomit-frame-pointer and similar.
I have:
CFLAGS=-march=k8-sse3
Hasan SAHIN writes:
I am using Athlon64 X2 processor with the
CFLAGS=-march=k8 -O2 -pipe -fomit-frame-pointer option.
Can I use the -march=native option instead of that?
Sure, as long as you are not using distcc, in which case the distcc
servers would compile according to _their_ native
Mick writes:
On Tuesday 29 June 2010 15:38:05 Neil Bothwick wrote:
I used to be a big Konqueror fan until about six months ago. Then I
tried Chromium and was blown away by its speed and the way it works
on more sites. I do miss some of the integration of Konqueror and
its kio-slaves and
mailinglist...@gmail.com writes:
My x is a bit slow. Lets say I have a minimized
web browser with a page with pictures and text.
If I maximize it, the drawing of the page and
the widgets doesn't happen instantly, but it
takes a moment.
I tried ubuntu livecd, and this test was much
faster,
Kevin O'Gorman writes:
As the OP, I'd like to know if anybody else has noticed how far OT this
thread has gone?
Somebody please give it a meaningful title, and maybe the right people
will notice your thread
But I think the title is just perfect! Well, not really, because, despite
my
Mick writes:
On Saturday 26 June 2010 11:40:14 Mick wrote:
I have not exported any locale in my ~/.bashrc, so should a plain
user locale reflect what's in /etc/env.d/02locale?
I added /etc/env.d/02locale as you show above, but my plain user
still shows all settings as en_US.UTF-8 ...
Kevin O'Gorman writes:
Sometimes, but not always, when I click in the Firefox scrollbar, it
starts heading in the right direction in fits and starts of 5 pixels
or so until it (finallly) reaches the end. I've mostly observed this
in the downward direction, but I mostly scroll in that
Dale writes:
Alan McKinnon wrote:
And someone else reported that heir konqueror does it too. If these
things are related that would cancel out Firefox itself and move
over to the video system
Well, my KDE does so many weird things, this still might be unrelated.
Similar problems are
Walter Dnes writes:
On Thu, Jun 24, 2010 at 09:38:17PM +0100, Mick wrote
I'll repeat the advice I was given in this list sometime around last
Christmas (but can't find the thread now): you're bound to find some
pesky application which is only available in 32bit and then you'll
curse
Matthias Fechner writes:
I followed now the wiki page:
http://en.gentoo-wiki.com/wiki/Grub2
Down again.
At the step to create the config file with:
grub-mkconfig -o /boot/grub/grub.cfg
and install grub2 with:
grub-install /dev/sda
it needs several hours to complete each of the
Hi there!
I am having big trouble setting up ISDN. I'm a long-time ISDN user, I need
this for connecting to some remote systems that do not have an internet
connection. I always used my server for this, but due to a sudden
breakdown of phone+dsl on that machine (which is far away, I have no
And again, I had already written an answer to your last posting, but then
my dreaded mouse problem in KDE4 happened again, and I forgot to save the
mail as draft before logging out and in again.
Mick writes:
On Tuesday 22 June 2010 19:34:19 you wrote:
On Tuesday 22 June 2010 19:03:00 Mick
Mick writes:
Please remind me what we are supposed to do when we get:
* Package 'net-libs/neon-0.29.3' NOT merged due to file collisions. If
* necessary, refer to your elog messages for the whole content of the
* above message.
You could force installation with
Dale writes:
I don't use genkernel anymore. I just roll my own. That way, I know
what is in there and what is not. Then if something doesn't work, I
know if it is the kernel or something else. With genkernel, you won't
have a clue what it is since you don't know much if anything about the
Walter Dnes writes:
I just got a brand new custom-built 8 gig machine. There's an outfit
in north Toronto that has MSI motherboards with PS/2 ports, so I can
keep my genuine IBM PS/2 clickety-clack-keyboard; woho. And the
integrated Intel graphics chip has *BOTH VGA AND DIGITAL
meino.cra...@gmx.de writes:
Tried that...python3.1 compiles fine, setuptools failed.
And now?
How about putting dev-python/setuptools into
/etc/portage/package.keywords, and trying to emerge 0.6.13?
Wonko
meino.cra...@gmx.de writes:
Alex Schuster wo...@wonkology.org [10-06-20 15:16]:
How about putting dev-python/setuptools into
/etc/portage/package.keywords, and trying to emerge 0.6.13?
I tried to re-emerge setuptools 0.6.10 and it fails the same way.
So I believe (=not knowing
this mess things up?
On 17 June 2010 00:23, Alex Schuster wo...@wonkology.org wrote:
[snip ...]
Mick wrote:
On Tuesday 09 March 2010 20:12:09 Alex Schuster wrote:
- Kontact. The old address book I had imported fro KDE 3.5 half a
year ago showed one address book and many std.vcf (or similar
is /usr/share in there twice? Could this mess things up?
Seems to be normal, I also have this with a fresh setup.
On 17 June 2010 00:23, Alex Schuster wo...@wonkology.org wrote:
[snip ...]
Mick wrote:
On Tuesday 09 March 2010 20:12:09 Alex Schuster wrote:
But: There are errors when
Colleen Beamer writes:
On Thu, Jun 17, 2010 at 12:54 PM, Alex Schuster wo...@wonkology.org
wrote:
I don't remember why I unmasked the unstable version of libpng.
However, following your advice, I first attempted to reinstall kdm.
This had been an update 6 days ago when all this started
Allan Gottlieb writes:
The machine seems to have two hardware states determined by whether
windows has been run since power on.
I _think_ I read about such a problem ages ago, and there was a
workaround. Either in the BIOS, or in Windows, some Wake-On-LAN option. If
activated, Windows would
Colleen Beamer writes:
First, I looked in the archives and didn't find anything relevant -
could be my stupidity, but I did try!
Fine :)
From my kdm log the last few lines are as follows:
(EE) Failed to load module dri (module does not exist, 0)
(EE) Failed to load module dri2 (module
I wrote:
J. Roeleveld writes:
Probably your graphicscard uses the rest of the memory.
Oh, thanks! Did not think about this. It's an ATI Radeon HD4300
onboard card, so I guess this must be the cause. Seems like I will
have to do the migration to 64bit then.
Wonko,
If
. I'm doing this with every longer mail now. I saved the mail as
draft, and went to my Linxu machine where I resumed the edit. I wanted to
try something and went into the import menu: Crash! Good thing
the Windows Clipboard still had it.
Mick wrote:
On Tuesday 09 March 2010 20:12:09 Alex
Rod writes:
Does anyone know how to block, or auto programs in Gentoo to limit
or stop people scanning for a user/password hacking on your firewall?
I am using net-analyzer/fail2ban. That can block an IP after some
unsuccessful login attempts. This helps a lot, but not against bot nets,
walt writes:
On 06/16/2010 04:05 PM, Jake Moe wrote:
I've just completed a fresh Gentoo installation on a new laptop, and
strangely, after I choose the entry from the Grub screen, all I get
is:
Booting `Gentoo Linux 2.6.32-r7`
root (hd0,1)
Filesystem type is ext2fs,
Michael Sullivan writes:
4: mich...@camille ~ $ nmblookup -B BIGSERVER __SAMBA__
querying __SAMBA__ on 192.168.1.255
192.168.1.2 __SAMBA__00
4: carter ~ # nmblookup -B camille *
querying xorg.conf.new on 192.168.1.3
name_query failed to find name xorg.conf.new
*I'm not sure what
Jose Juan Montiel writes:
yesterday i finally decide to try Gentoo (I came from debian).
Welcome!
I follow all step of
http://www.gentoo.org/doc/en/gentoo-x86-quickinstall.xml but when i
finally go to install gnome... in the latests package (mailclient or
something similar) fail...
Helmut Jarausch writes:
On 10 Jun, J. Roeleveld wrote:
You could either first use mkfs for ext3 or 4 to check, or you could
run badblock manually over the partition first to check.
Thanks, Joost,
but I don't know how to feed the output of badblocks to mkbtrfs.
It looks as if btrfs
Tanstaafl writes:
So... for those of use who have already installed it (and thankfully I
did actually read the notes about not switching to it), should me
uninstall it then mask it? Or just leave it alone?
For the sake of simplicity, I just leave it alone.
I'm guessing it
won't hurt
Walter Dnes writes:
I'm converting an older Dell E521 AMD K8 machine from XP to Gentoo.
I intend to use it with an HDHomerun ATSC tuner, for recording and
playback. I don't know if it supports AGP, but I am including... *
AMD Opteron/Athlon64 on-CPU GART support
* NVIDIA
Daniel D Jones writes:
eix gcc shows:
Installed versions:
4.3.4(4.3)!s(10:56:18 AM 02/27/2010)(gtk mudflap nls nptl openmp
-altivec - bootstrap -build -doc -fixed-point -fortran -gcj -hardened
-libffi -multilib - multislot -n32 -n64 -nocxx -nopie -objc -objc++
-objc-gc -test -vanilla)
Jake Moe writes:
j...@aus10224 ~ $ ssh -Y jhb5970
Password:
Last login: Wed Jun 9 08:05:09 EST 2010 from 192.168.0.114 on pts/0
j...@jhb5970 ~ $ firefox
Error: no display specified
j...@jhb5970 ~ $ konqueror
konqueror: cannot connect to X server
j...@jhb5970 ~ $
Try echo $DISPLAY, this
Mick writes:
I am getting worried now about fs corruption.
I would be, too.
The fs is supposed to be checked at boot time
But only if it was not shut down correctly. To force a complete fsck on
reboot on a file system that looks sane, issue a 'touch /force_fsck'.
Wonko
Johannes Kimmel writes:
On 06/02/2010 03:27 PM, Alex Schuster wrote:
But: free -m shows only 2787 MB of total memory. I know I cannot use
all the 4G, but shouldn't there be at least 3GB or even a little
more available? What is your output of free -m?
[...]
Probably your graphicscard
Hi there!
I have 4GB of RAM, but the system is swapping A LOT. I think I will have
to go to 64 bit, but I need some time for that, and I need to use the
system in the meantime.
But: free -m shows only 2787 MB of total memory. I know I cannot use all
the 4G, but shouldn't there be at least 3GB
kitti jaisong writes:
I just install sparc machine. i found error failed: No space left on
device (28) when i check inode by df -i command
[...]
/dev/sda4 2.0G 952M 963M 50% /mnt/gentoo/usr
/dev/sda5 2.0G 83M 1.8G 5% /mnt/gentoo/var
/dev/sda6 29G
Harry Putnam writes:
Alex Schuster wo...@wonkology.org writes:
After writing down some ideas about installing the old libraries
somewhere in parallel, I just checked eix, and there is an extra
slot for the 1.2 version. So, just emerge media-libs/libpng:1.2 ,
and I'd expect all to be fine
Madhurya Kakati writes:
Philip, Thanks for the detailed answer.
Yeah, that was a nice one.
On 5/25/2010 9:09 PM, Philip Webb wrote:
100525 Madhurya Kakati wrote:
I am currently using Archlinux and Windows 7 and want to try out
Gentoo.
Welcome aboard ! -- Gentoo requires a bit of
Mick wrote:
On Sunday 16 May 2010 02:56:23 Alex Schuster wrote:
But my main problem is another one: How do I tell CUPS which device
my printer is? I tried usb:/dev/usb/lp0 (found this notation when
googling 'usb printer device uri'), but nothing happens when I try
to print
Roy Wright writes:
Argh. Just have to vent a little.
We feel with you :)
So on to my list a applications to be installed. Firefox check,
openoffice check, handbrake...crap. Handbrake is one of the
non-standard packages that includes their own version of support
libraries. You guessed
Hi there!
I want to setup an USB printer. So I http://localhost:631/, and notice
that the interface has changed. And when I try to add a printer, the only
options for a local printer are SCSI-printer and HAL printing backend. And
on the next screen, I have to enter the device URI by hand. How
Mick writes:
On Saturday 15 May 2010 22:56:22 Alex Schuster wrote:
I want to setup an USB printer. So I http://localhost:631/, and
notice that the interface has changed. And when I try to add a
printer, the only options for a local printer are SCSI-printer and
HAL printing backend
walt writes:
On 05/15/2010 04:01 PM, Dale wrote:
Just for reference, this is my USE flags:
USE=X avahi dbus gnutls java jpeg ldap pam perl png ppds python ssl
tiff zeroconf -acl -kerberos -php -samba -slp -static -xinetd
Good grief, Dale, you're almost stark nekkid! Where are all
501 - 600 of 1016 matches
Mail list logo
