Re: [gentoo-user] USB automount
On Mon, Sep 17, 2012 at 10:45 AM, Stefan G. Weichinger li...@xunil.at wrote: Am 16.09.2012 20:45, schrieb Canek Peláez Valdés: This workaround also works in my systemd-only overlay. So, if you have the systemd flag in any of those four packages, disable it and everything should work. Just to be explicit, the versions are: gnome-base/gdm-3.4.1-r1 gnome-base/gnome-session-3.4.2.1 gnome-base/gnome-shell-3.4.2 sys-auth/polkit-0.107:0 confirming this. I have exactly your mentioned versions with USE=-systemd and suspend/hibernate option returns, I could mount/use a DVD right now ... yes! OK; now I can put this whole thing behind me. You can read the bug again: https://bugs.freedesktop.org/show_bug.cgi?id=53905 but the short answer is that you cannot let both systemd and consolekit to manage sessions. The problem (in my case) was that I was using accountsservice 0.6.22, which depends on consolekit. I upgraded to accountsservice 0.6.24 (which can depend on systemd), I removed all consolekit USE-flags (except for bluez: bluez uses consolekit to pull either consolekit or systemd; I reported a bug[1]), and after an emerge -uDNv world, I removed consolekit (I didn't had any other package depending on it). Now everything works as it should, in both my overlay and in the vanilla Gentoo tree. Be aware: it works *with systemd*; maybe it works without it, but I don't know (nor care). All the GNOME session management is moving to systemd, and I think it's a great idea. Support for consolekit (which is no longer maintained) is still there, but I don't know for how long. If you want to keep using (the unmaintained) consolekit, be sure to set -systemd in your USE flags. Do not mix systemd and consolekit, or this bug will hit you. Regards. [1] https://bugs.gentoo.org/show_bug.cgi?id=436180 -- Canek Peláez Valdés Posgrado en Ciencia e Ingeniería de la Computación Universidad Nacional Autónoma de México
Re: [gentoo-user] USB automount
Am 25.09.2012 08:33, schrieb Canek Peláez Valdés: On Mon, Sep 17, 2012 at 10:45 AM, Stefan G. Weichinger li...@xunil.at wrote: Am 16.09.2012 20:45, schrieb Canek Peláez Valdés: This workaround also works in my systemd-only overlay. So, if you have the systemd flag in any of those four packages, disable it and everything should work. Just to be explicit, the versions are: gnome-base/gdm-3.4.1-r1 gnome-base/gnome-session-3.4.2.1 gnome-base/gnome-shell-3.4.2 sys-auth/polkit-0.107:0 confirming this. I have exactly your mentioned versions with USE=-systemd and suspend/hibernate option returns, I could mount/use a DVD right now ... yes! OK; now I can put this whole thing behind me. You can read the bug again: https://bugs.freedesktop.org/show_bug.cgi?id=53905 but the short answer is that you cannot let both systemd and consolekit to manage sessions. The problem (in my case) was that I was using accountsservice 0.6.22, which depends on consolekit. I upgraded to accountsservice 0.6.24 (which can depend on systemd), I removed all consolekit USE-flags (except for bluez: bluez uses consolekit to pull either consolekit or systemd; I reported a bug[1]), and after an emerge -uDNv world, I removed consolekit (I didn't had any other package depending on it). Now everything works as it should, in both my overlay and in the vanilla Gentoo tree. Be aware: it works *with systemd*; maybe it works without it, but I don't know (nor care). All the GNOME session management is moving to systemd, and I think it's a great idea. Support for consolekit (which is no longer maintained) is still there, but I don't know for how long. If you want to keep using (the unmaintained) consolekit, be sure to set -systemd in your USE flags. Do not mix systemd and consolekit, or this bug will hit you. Regards. [1] https://bugs.gentoo.org/show_bug.cgi?id=436180 Thanks a lot for the feedback. So if I don't use systemd right now, it would be better to keep consolekit? I give it a try now ... compiling stuff without that flag for a test. Stefan
Re: [gentoo-user] USB automount
Am 25.09.2012 10:09, schrieb Stefan G. Weichinger: So if I don't use systemd right now, it would be better to keep consolekit? I give it a try now ... compiling stuff without that flag for a test. Did not work. Rather easy to understand, if neither systemd or consolekit is there, how should things work ... Re-enabled USE-flag consolekit for now, re-emerged 4 pkgs, ok now. Maybe I will try systemd again soon ... Thanks, Stefan
[gentoo-user] openmp flag
Hello, background: It seems there is a major push now to put openmp: [1,2] into embedded systems [3]. So I looked at these [4] packages to find something interesting to look deeper into related to openMP. Blender immediately jumped out at me as a good example, cause an old friend Ken Hughes is, imho, one of the world's most amazing C programmers, and a stalwart at the blender project. OK, here's the question, I went to emerge blender and found that the openmp flag is already set. {?} Yet I looked everywhere and did not see the openmp flag set (/etc/make.conf, /etc/portage/package.use) so where is it getting set on my AMD workstation? [ebuild N ] media-gfx/blender-2.49b-r2 USE=ffmpeg nls ogg openmp -blender-game -openal -verse I feel like I should know (profiles etc) but, I'm a little bit brain_dead this am, so any help is appreciated. OH, anyone is encouraged to chime in about openmp and your thoughts as to it's viability and usefulness. Do you believe it will become a core technology, embedded into GCC? Used widely? James [1] http://www.open-mpi.org/ [2] http://gcc.gnu.org/wiki/openmp [3] http://www.embedded.com/design/programming-languages-and-tools/4396218/What-the-new-OpenMP-standard-brings-to-embedded-multicore-software-design?cid=Newsletter+-+Whats+New+on+Embedded.com [4] http://gentoobrowse.randomdan.homeip.net/use/openmp
Re: [gentoo-user] openmp flag
On Tue, Sep 25, 2012 at 10:42 AM, James wirel...@tampabay.rr.com wrote: Hello, background: It seems there is a major push now to put openmp: [1,2] into embedded systems [3]. So I looked at these [4] packages to find something interesting to look deeper into related to openMP. Blender immediately jumped out at me as a good example, cause an old friend Ken Hughes is, imho, one of the world's most amazing C programmers, and a stalwart at the blender project. OK, here's the question, I went to emerge blender and found that the openmp flag is already set. {?} Yet I looked everywhere and did not see the openmp flag set (/etc/make.conf, /etc/portage/package.use) so where is it getting set on my AMD workstation? [ebuild N ] media-gfx/blender-2.49b-r2 USE=ffmpeg nls ogg openmp -blender-game -openal -verse I feel like I should know (profiles etc) but, I'm a little bit brain_dead this am, so any help is appreciated. Packages can choose to have USE flags enabled or disabled for them by default. So blender likely has openmp enabled by default, without that affecting any other packages. OH, anyone is encouraged to chime in about openmp and your thoughts as to it's viability and usefulness. Do you believe it will become a core technology, embedded into GCC? Used widely? If you can use it, use it. OpenMP is little more than a set of extensions to C (and C++) which allows the normally-scalar language to do some things in a parallel fashion without resorting to the costs of multithreading. This is good, because vector instructions have been available in x86 since MMX came out, and improvements to the vector instructions available to x86 still goes on. Related are CUDA and OpenCL, which are two other systems for parallelizing code. CUDA assumes you have access to an nVidia GPU (and have a CUDA-enabled driver installed). OpenCL is a big more generic, and supports dispatching to CUDA, CPU vector instructions or even thread pools. Personally, my recommendation is to enable everything you can get working (be it, OpenMP, CUDA or OpenCL); vector processing is going to be generally more efficient than scalar processing. You don't need to worry about which is better unless you're a software developer. (And if you're a software developer, go study up on their differences; tradeoffs happen.) -- :wq
Re: [gentoo-user] USB automount
On Tue, Sep 25, 2012 at 3:32 AM, Stefan G. Weichinger li...@xunil.at wrote: Am 25.09.2012 10:09, schrieb Stefan G. Weichinger: So if I don't use systemd right now, it would be better to keep consolekit? I give it a try now ... compiling stuff without that flag for a test. Did not work. Rather easy to understand, if neither systemd or consolekit is there, how should things work ... Re-enabled USE-flag consolekit for now, re-emerged 4 pkgs, ok now. Maybe I will try systemd again soon ... It's not only the use flag; if you set USE=systemd, you need to boot with systemd. Otherwise, set USE=consolekit -systemd. Regards. -- Canek Peláez Valdés Posgrado en Ciencia e Ingeniería de la Computación Universidad Nacional Autónoma de México
Re: [gentoo-user] openmp flag
On Tue, 25 Sep 2012 11:01:52 -0400, Michael Mol wrote: OK, here's the question, I went to emerge blender and found that the openmp flag is already set. {?} Yet I looked everywhere and did not see the openmp flag set (/etc/make.conf, /etc/portage/package.use) so where is it getting set on my AMD workstation? [ebuild N ] media-gfx/blender-2.49b-r2 USE=ffmpeg nls ogg openmp -blender-game -openal -verse I feel like I should know (profiles etc) but, I'm a little bit brain_dead this am, so any help is appreciated. Packages can choose to have USE flags enabled or disabled for them by default. So blender likely has openmp enabled by default, without that affecting any other packages. However in this case, the flag is not set in the ebuild. Eix shows a + before the USE flag if it is enabled in the ebuild. The one place the OP didn't appear to check was the output from emerge --info. The flag is set on this system, with a desktop profile. -- Neil Bothwick Everything should be made as simple as possible, but no simpler. signature.asc Description: PGP signature
[gentoo-user] systemd question
I just installed and booted with systemd and most services are working normally, except syslog.service and remote-fs.service. Both of those failed on bootup with a No such file or directory error. I can't figure out how to make systemd tell me which files it can't find. Any ideas?
Re: [gentoo-user] systemd question
On Tue, Sep 25, 2012 at 2:24 PM, walt w41...@gmail.com wrote: I just installed and booted with systemd and most services are working normally, except syslog.service and remote-fs.service. Both of those failed on bootup with a No such file or directory error. I can't figure out how to make systemd tell me which files it can't find. Any ideas? The syslog.service works as a place-holder for whatever syslog you have installed (or not). So, if you have syslog-ng, you do ln -s /usr/lib/systemd/system/syslog-ng.service /etc/systemd/system/syslog.service If you have rsyslog, you do: ln -s /usr/lib/systemd/system/rsyslog.service /etc/systemd/system/syslog.service If you (like me) don't have any syslog because you want to use journald, you do: ln -s /dev/null /etc/systemd/system/syslog.service That is the common way to mask services in systemd. If you don't need remote filesystems (NFS, cifs shares, etc.) mounted at boot time, mask remote-fs.service: ln -s /dev/null /etc/systemd/system/remote-fs.service I do however have the remote-fs.service (systemd-191, out of the oven), I don't know why it isn't installed in your case. Which version are you using. Regards -- Canek Peláez Valdés Posgrado en Ciencia e Ingeniería de la Computación Universidad Nacional Autónoma de México
[OT] Re: [gentoo-user] openmp flag
On Tuesday 25 September 2012 20:06:15 Neil Bothwick wrote: Everything should be made as simple as possible, but no simpler. That's a version of Occam's Razor, isn't it? Otherwise known as Do not complicate beyond necessity. -- Rgds Peter
[gentoo-user] Problems with update
Hello, i want run the update and emerge ever give message: gentoo-desk doxygen # emerge --update --newuse --deep --with-bdeps=y @world Calculating dependencies... done! !!! All ebuilds that could satisfy =gnome-base/gvfs-1.10.1[udisks,udev] have been masked. !!! One of the following masked packages is required to complete your request: - gnome-base/gvfs-1.14.0::gentoo (masked by: package.mask, ~x86 keyword) /usr/portage/profiles/package.mask: # Alexandre Rostovtsev tetrom...@gentoo.org (25 Sep 2012) # GNOME 3.6 mask # Core libraries to be unmasked first: - gnome-base/gvfs-1.12.3::gentoo (masked by: ~x86 keyword) - gnome-base/gvfs-1.12.2-r1::gentoo (masked by: ~x86 keyword) (dependency required by xfce-base/thunar-1.4.0[udev] [installed]) (dependency required by xfce-extra/thunar-volman-0.8.0 [installed]) (dependency required by @selected [set]) (dependency required by @world [argument]) For more information, see the MASKED PACKAGES section in the emerge man page or refer to the Gentoo Handbook. I understand not, on my laptop is the same configuration, the same use flags and there is no problem. When i set the Keyword then i must take udev, gvfs, zlib and some other programs in unmask and at end run the update not. Someone a idea? Thanx for help. Silvio make.conf http://nopaste.info/ac26f483de.html package.use http://nopaste.info/484c02131b.html package.unmask http://nopaste.info/31b7988985.html package.accept_keywords http://nopaste.info/a9b89cea61.html
[gentoo-user] Creating KVM image using existing gentoo partition
Got a new laptop at work,, running Linux instead of Mac, yay! Unfortunately, it comes with Ubuntu installed, boo! But I split the 500GB drive into two parts, began a gentoo install in the second half, and now I am stalled. The main purpose of the laptop is to run Centos 6.2 in a KVM image so it can simulate production as much as possible. As much as I dislike Ubuntu, I really only use it for terminals, Emacs, and Firefox. I ssh into the Centos image for all that stuff. I'd love to switch Ubuntu to gentoo and set up my usual fvwm etc instead of that awful Unity. Unfortunately, because I have to leave that Centos image running as much as possible, I can't take the time to reboot into the gentoo partition to finish the install, not even on weekends or evenings. It was ok getting the initial gentoo install started, but that was only an hour or two. I can't take the time for a real install, there's work to do. So it occurred to me it would be great to create a new KVM image using the gentoo partition as is for its file system, instead of creating one out of a file as it did for the Centos image. But I don't see any obvious options to do that. This is my first time with KVM, and someone else set up the Centos image using some GUI wizard. Here be my scurvy dog question(s): Is it possible to create a KVM image using an existing gentoo partition (/dev/sda3) for the filesystem, such that once I get the gentoo install finished, I can boot directly to the gentoo partition and not have to purify it or sanitize it after KVM has meddled with it? (and how do I do this? :-) If not, seems like the simplest workaround would be to create a KVM image from scratch and do a complete install there, then use cp, tar, cpio, or something similar to copy everything over to the real partition. But that sounds ugly for some reason. -- ... _._. ._ ._. . _._. ._. ___ .__ ._. . .__. ._ .. ._. Felix Finch: scarecrow repairman rocket surgeon / fe...@crowfix.com GPG = E987 4493 C860 246C 3B1E 6477 7838 76E9 182E 8151 ITAR license #4933 I've found a solution to Fermat's Last Theorem but I see I've run out of room o
Re: [gentoo-user] Creating KVM image using existing gentoo partition
On Tue, 25 Sep 2012 15:33:25 -0700 fe...@crowfix.com wrote: Got a new laptop at work,, running Linux instead of Mac, yay! Unfortunately, it comes with Ubuntu installed, boo! But I split the 500GB drive into two parts, began a gentoo install in the second half, and now I am stalled. The main purpose of the laptop is to run Centos 6.2 in a KVM image so it can simulate production as much as possible. As much as I dislike Ubuntu, I really only use it for terminals, Emacs, and Firefox. I ssh into the Centos image for all that stuff. I'd love to switch Ubuntu to gentoo and set up my usual fvwm etc instead of that awful Unity. Unfortunately, because I have to leave that Centos image running as much as possible, I can't take the time to reboot into the gentoo partition to finish the install, not even on weekends or evenings. It was ok getting the initial gentoo install started, but that was only an hour or two. I can't take the time for a real install, there's work to do. If you ask me, there's your real problem right there. It reminds me of the old adage; How come is there never enough time to do the job properly, but always enough time to do it over when it breaks? Just bite the bullet, shut the machine down and do the install properly - you know you need to do it. I can't quite fathom why you think a laptop of all things must be on 24/7. if that were true, it would be a server in your data center surely? Are you real completely 100% certain that out of 168 hours a week you can't spare 2 to get your tools in order? So it occurred to me it would be great to create a new KVM image using the gentoo partition as is for its file system, instead of creating one out of a file as it did for the Centos image. But I don't see any obvious options to do that. This is my first time with KVM, and someone else set up the Centos image using some GUI wizard. Here be my scurvy dog question(s): Is it possible to create a KVM image using an existing gentoo partition (/dev/sda3) for the filesystem, such that once I get the gentoo install finished, I can boot directly to the gentoo partition and not have to purify it or sanitize it after KVM has meddled with it? (and how do I do this? :-) If not, seems like the simplest workaround would be to create a KVM image from scratch and do a complete install there, then use cp, tar, cpio, or something similar to copy everything over to the real partition. But that sounds ugly for some reason. -- Alan McKinnon alan.mckin...@gmail.com
Re: [OT] Re: [gentoo-user] openmp flag
On Tue, 25 Sep 2012 22:56:59 +0100 Peter Humphrey pe...@humphrey.ukfsn.org wrote: On Tuesday 25 September 2012 20:06:15 Neil Bothwick wrote: Everything should be made as simple as possible, but no simpler. That's a version of Occam's Razor, isn't it? Otherwise known as Do not complicate beyond necessity. It's a tautology. You cannot make something any simpler than the simplest you can possibly make it, so the last but no simpler is redundant -- Alan McKinnon alan.mckin...@gmail.com
Re: [gentoo-user] Creating KVM image using existing gentoo partition
On Wed, Sep 26, 2012 at 12:40:32AM +0200, Alan McKinnon wrote: Just bite the bullet, shut the machine down and do the install properly - you know you need to do it. I can't quite fathom why you think a laptop of all things must be on 24/7. if that were true, it would be a server in your data center surely? Are you real completely 100% certain that out of 168 hours a week you can't spare 2 to get your tools in order? It's good you know so much about my job and work requirements, means I needn't waste more time educating on them. -- ... _._. ._ ._. . _._. ._. ___ .__ ._. . .__. ._ .. ._. Felix Finch: scarecrow repairman rocket surgeon / fe...@crowfix.com GPG = E987 4493 C860 246C 3B1E 6477 7838 76E9 182E 8151 ITAR license #4933 I've found a solution to Fermat's Last Theorem but I see I've run out of room o
Re: [gentoo-user] Creating KVM image using existing gentoo partition
On Tuesday 25 September 2012 23:40:32 Alan McKinnon wrote: How come is there never enough time to do the job properly, but always enough time to do it over when it breaks? The first 50% of the project takes the first 90% of the time, and the second 50% takes the other 90%. -- Rgds Peter
Re: [gentoo-user] Creating KVM image using existing gentoo partition
On Tue, 25 Sep 2012 15:59:44 -0700 fe...@crowfix.com wrote: On Wed, Sep 26, 2012 at 12:40:32AM +0200, Alan McKinnon wrote: Just bite the bullet, shut the machine down and do the install properly - you know you need to do it. I can't quite fathom why you think a laptop of all things must be on 24/7. if that were true, it would be a server in your data center surely? Are you real completely 100% certain that out of 168 hours a week you can't spare 2 to get your tools in order? It's good you know so much about my job and work requirements, means I needn't waste more time educating on them. No, in fact I know nothing about your job and work requirements other than that your usage pattern as described is one I have never seen or heard of before, anywhere. Now if you go back and read my mail, you will see it consists of questions, not statements. I'm actually asking you to look at what you said and see if it's really valid. -- Alan McKinnon alan.mckin...@gmail.com
Re: [OT] Re: [gentoo-user] openmp flag
On Tue, Sep 25, 2012 at 6:46 PM, Alan McKinnon alan.mckin...@gmail.com wrote: On Tue, 25 Sep 2012 22:56:59 +0100 Peter Humphrey pe...@humphrey.ukfsn.org wrote: On Tuesday 25 September 2012 20:06:15 Neil Bothwick wrote: Everything should be made as simple as possible, but no simpler. That's a version of Occam's Razor, isn't it? Otherwise known as Do not complicate beyond necessity. It's a tautology. You cannot make something any simpler than the simplest you can possibly make it, so the last but no simpler is redundant The but no simpler is there as a reminder that it's possible to over-simplify. -- :wq
[gentoo-user] Re: systemd question
On 09/25/2012 02:42 PM, Canek Peláez Valdés wrote: On Tue, Sep 25, 2012 at 2:24 PM, walt w41...@gmail.com wrote: I just installed and booted with systemd and most services are working normally, except syslog.service and remote-fs.service. Both of those failed on bootup with a No such file or directory error. I can't figure out how to make systemd tell me which files it can't find. Any ideas? The syslog.service works as a place-holder for whatever syslog you have installed (or not). So, if you have syslog-ng, you do ln -s /usr/lib/systemd/system/syslog-ng.service /etc/systemd/system/syslog.service My problem is that I don't have syslog-ng.service in /usr/lib/systemd. Neither systemd nor syslog-ng installed it. Do I write it myself? I do however have the remote-fs.service (systemd-191, out of the oven), I don't know why it isn't installed in your case. Which version are you using. Same: 191. I do have syslog.target and remote-fs.target installed, but not the corresponding *.system files. Maybe the useflags determine this?
[gentoo-user] Re: Amaya
On 09/22/2012 07:13 AM, Silvio Siefke wrote: Hello, i try since days install Amaya but it want not work. I try from Source but it end with mistake in wx, but wxGTK is installed. I try from deb Package it end with Raptor errors. Has someone installed Amaya and can me tell the way? I finally got it installed using this source tarball: http://www.w3.org/Amaya/Distribution/amaya-sources-11.4.4.tgz I run gentoo ~amd64, and because of that I had to edit three of the amaya source files to get it to compile. I think maybe if you are running a 32-bit stable gentoo it should 'just work', but I no longer have such a machine to test. What gentoo version/arch are you running?
[gentoo-user] new install not starting gdm
I am building a new installation and must have messed up a step as gdm doesn't start from boot If I manually execute eselect rc restart xdm I get Sep 25 20:10:51 newlap gnome-keyring-daemon[2106]: couldn't create socket directory: No such file or directory Sep 25 20:10:51 newlap gnome-keyring-daemon[2106]: couldn't bind to control socket: /root/.cache/keyring-dJpHuM/control: No such file or directory which appears to be the problem and can also be found in /log/messages I have installed xorg-x11, xdm and gnome and /var/log/Xorg.0.log looks OK. The only complaints are failing to load vesa, modsetting, and fbdev drivers. However, the intel driver loads fine. /var/log/dmesg ends with entries saying that EXT4-fs mounted filesystems. No gdm/xdm/X/keyring complaints. What step did I miss? thanks, allan
Re: [gentoo-user] new install not starting gdm (Solved)
On Tue, Sep 25 2012, Allan Gottlieb wrote: I am building a new installation and must have messed up a step as gdm doesn't start from boot If I manually execute eselect rc restart xdm I get Sep 25 20:10:51 newlap gnome-keyring-daemon[2106]: couldn't create socket directory: No such file or directory Sep 25 20:10:51 newlap gnome-keyring-daemon[2106]: couldn't bind to control socket: /root/.cache/keyring-dJpHuM/control: No such file or directory which appears to be the problem and can also be found in /log/messages I didn't have dbus started. The easy fix was eselect rc add dbus default allan
Re: [gentoo-user] Re: systemd question
On Tue, Sep 25, 2012 at 6:56 PM, walt w41...@gmail.com wrote: On 09/25/2012 02:42 PM, Canek Peláez Valdés wrote: On Tue, Sep 25, 2012 at 2:24 PM, walt w41...@gmail.com wrote: I just installed and booted with systemd and most services are working normally, except syslog.service and remote-fs.service. Both of those failed on bootup with a No such file or directory error. I can't figure out how to make systemd tell me which files it can't find. Any ideas? The syslog.service works as a place-holder for whatever syslog you have installed (or not). So, if you have syslog-ng, you do ln -s /usr/lib/systemd/system/syslog-ng.service /etc/systemd/system/syslog.service My problem is that I don't have syslog-ng.service in /usr/lib/systemd. Neither systemd nor syslog-ng installed it. Do I write it myself? No, I suppose is in syslog-ng sources, but the ebuilds in Gentoo disables systemd support (at least for 3.3.5): # grep -n systemd /usr/portage/app-admin/syslog-ng/syslog-ng-3.3.5-r1.ebuild 68: --disable-systemd \ So you can fill a bug in Gentoo to get systemd support in syslog-ng, or just take the unit file from the source and put it in /etc/systemd/system. I don't know why it is diabled, though. I do however have the remote-fs.service (systemd-191, out of the oven), I don't know why it isn't installed in your case. Which version are you using. Same: 191. I do have syslog.target and remote-fs.target installed, but not the corresponding *.system files. Maybe the useflags determine this? Sorry: I meant remote-fs.target; I don't think there is remote-fs.service, it is a target (and one of the special ones). Do you need remote filesystem support? If not, then don't worry about it; but if you want to find the problem, send the output from systemctl status remote-fs.target. Mine is: # systemctl status remote-fs.target remote-fs.target - Remote File Systems Loaded: loaded (/usr/lib64/systemd/system/remote-fs.target; enabled) Active: active since Mon, 24 Sep 2012 18:33:09 -0500; 1 day and 3h ago Docs: man:systemd.special(7) Regards. -- Canek Peláez Valdés Posgrado en Ciencia e Ingeniería de la Computación Universidad Nacional Autónoma de México
Re: [gentoo-user] new install not starting gdm
You should edit this file: /etc/conf.d/xdm . Change the DISPLAYMANAGER=xdm to DISPLAYMANAGER=gdm. then: sudo rc-update add xdm default . 2012/9/26 Allan Gottlieb gottl...@nyu.edu I am building a new installation and must have messed up a step as gdm doesn't start from boot If I manually execute eselect rc restart xdm I get Sep 25 20:10:51 newlap gnome-keyring-daemon[2106]: couldn't create socket directory: No such file or directory Sep 25 20:10:51 newlap gnome-keyring-daemon[2106]: couldn't bind to control socket: /root/.cache/keyring-dJpHuM/control: No such file or directory which appears to be the problem and can also be found in /log/messages I have installed xorg-x11, xdm and gnome and /var/log/Xorg.0.log looks OK. The only complaints are failing to load vesa, modsetting, and fbdev drivers. However, the intel driver loads fine. /var/log/dmesg ends with entries saying that EXT4-fs mounted filesystems. No gdm/xdm/X/keyring complaints. What step did I miss? thanks, allan