On Mon, May 09, 2005 at 08:04:28PM -0700, Mark Knecht wrote
> [EMAIL PROTECTED] root]# mount /mnt/MusicLib/
> mount to NFS server 'dragonfly' failed: server is down.
> [EMAIL PROTECTED] root]#
>
> I know this must be a simple oversight but I just do not see it.
>
> Thanks for answering! I do app
Mark Knecht wrote:
>Hi Richard,
> portmap seems to be running:
>
>dragonfly ~ # ps aux | grep portmap
>rpc 8811 0.0 0.1 1672 684 ?Ss May02 0:00 /sbin/portmap
>root 11634 0.0 0.0 1484 476 pts/0R+ 19:59 0:00 grep portmap
>dragonfly ~ #
>
>rpcinfo looks at
On Tuesday 10 May 2005 02:05, Allan Spagnol Comar wrote:
> how can I biuld a damage version of the gcc ?
Use ggc-config to switch to a healthy gcc version, if you have one...
Ciao
Francesco
--
Linux Version 2.6.12-rc4, Compiled #1 Sun May 8 14:00:53 CEST 2005
One 1.53GHz AMD Athlon XP Pr
Grant wrote:
mx records srping to mind
two needed, three preferable.
Technically you don't *need* any mx records. Mail will be delivered to
the hostname in the absence of an MX record. If you don't have a
secondary MX server, sometimes they are more trouble than they are
worth, then there is no nee
Agreement.
equery size somepackage
is much, much slower than:
pkg-size somepackage
I don't know if equery can be significantly sped up in the future,
but the speed difference is a significant problem for me. With 550 MHz,
pkg-size (a relatively simple shell script) was almost instantaneous,
w
> > mx records srping to mind
> >
> > two needed, three preferable.
> >
>
> Technically you don't *need* any mx records. Mail will be delivered to
> the hostname in the absence of an MX record. If you don't have a
> secondary MX server, sometimes they are more trouble than they are
> worth, then t
On Tue, 2005-05-10 at 11:18 +1200, Nick Rout wrote:
> I have a lot of music and downloaded/ripped videos. I find myth a pretty good
> front end for that. mplayer is going pretty hard out on a divx, but it
> doesn't skip or anything. load average gets up to about 1.2. I even
> watched something w
On 5/9/05, Richard Fish <[EMAIL PROTECTED]> wrote:
> Mark Knecht wrote:
>
> >Hello again,
> > A bit more info. On the server side the directories seem to be exxported:
> >
> >dragonfly ~ # exportfs
> >/home/mark/MusicLib
> >
> >/MusicLib
> >dragonfly ~ #
> >
> >The second
Mark Knecht wrote:
>Hello again,
> A bit more info. On the server side the directories seem to be exxported:
>
>dragonfly ~ # exportfs
>/home/mark/MusicLib
>
>/MusicLib
>dragonfly ~ #
>
>The second one is the one I'm trying to mount remotely. However it's
>not clear to me
man rc-update
rc-update show
rc-update add X default
Good luck,
Mark
On 5/9/05, Zhendong Zhou (Kyle) <[EMAIL PROTECTED]> wrote:
>
> Hi,
> I am using madwifi & wpa_supplicant. after installing them and configured, I
> can manually start wpa_supplicant by 'wpa_supplicant -w
> -c/etc/wpa_sup
Hi,
I am using madwifi & wpa_supplicant. after
installing them and configured, I can manually start wpa_supplicant by
'wpa_supplicant -w -c/etc/wpa_supplicant.conf -Dmadwifi' and 'dhcpcd ath0'.
However, my problem is how to make them start automatically when the system
boot?
It seems that I
Nick Rout wrote:
mx records srping to mind
two needed, three preferable.
Technically you don't *need* any mx records. Mail will be delivered to
the hostname in the absence of an MX record. If you don't have a
secondary MX server, sometimes they are more trouble than they are
worth, then there is
Hello again,
A bit more info. On the server side the directories seem to be exxported:
dragonfly ~ # exportfs
/home/mark/MusicLib
/MusicLib
dragonfly ~ #
The second one is the one I'm trying to mount remotely. However it's
not clear to me if nfsd is listening on the rig
Hi,
with KDE
kdesu xemacs
or
kdesu k3b
is the easiest way.
But without KDE, the earlier mentioned sux, or xhost +localhost etc are fine
too.
--
gentoo-user@gentoo.org mailing list
Hi,
I am trying to get my HP printer up and running by following the how-to
on gentoo-wiki.com: http://gentoo-wiki.com/HOWTO_hpoj_/_CUPS
When i try to emerge hpijs i get dependecies with foomatic-db-engine. that's
all nice bu it's compilation fails. I've googled for it and didn't find
anyth
Hi,
I am trying to get my HP printer up and running by following the how-to
on gentoo-wiki.com: http://gentoo-wiki.com/HOWTO_hpoj_/_CUPS
When i try to emerge hpijs i get dependecies with foomatic-db-engine. that's
all nice bu it's compilation fails. I've googled for it and didn't fin
how can I biuld a damage version of the gcc ?
On 5/9/05, Francesco Talamona <[EMAIL PROTECTED]> wrote:
> On Monday 09 May 2005 12:45, Allan Spagnol Comar wrote:
> > so I can run gcc-config -l now but what should I expect from
> > this command ?
>
> It'll list all gcc available in your system
mx records srping to mind
two needed, three preferable.
On Mon, 9 May 2005 16:39:50 -0700
Grant wrote:
> Hello, I'm about to complete the move to my new Gentoo server and I
> was hoping you guys could help with the DNS entries I'll need. I'm
> using everydns.net.
>
> I know I need an A record
Hi,
On my wife's machine, which we converted from FC2 to Gentoo a few
weeks ago, I have one thing I forgot to do. We have a large (50GB) ogg
music library that we used to export over NFS so that other machines
in the house could play the music locally. However I forgot to get
that working until
Hello, I'm about to complete the move to my new Gentoo server and I
was hoping you guys could help with the DNS entries I'll need. I'm
using everydns.net.
I know I need an A record for mydomain.com and a CNAME record for
www.mydomain.com. Do I need anything else if I want to use email with
this
On Mon, 9 May 2005 08:05:22 -0700
Mark Knecht wrote:
> > Nick Rout schreef:
> > > I have an M9000 epia mini-itx box. It chokes on ffmpeg per the error
> > > message later on.
>
> -I'/var/tmp/portage/ffmpeg-0.4.9_p20050226-r3/work/ffmpeg-0.4.9-p20050226-shared'
>
> Nick,
>emerge sync? I see
Unless things have changed, equery is not a full replacement for qpkg
and etcat: you can get different results for packages that are installed
at times - all three can and do show different results at times. None
are always correct! Its actually quite a useful fault finding tool. On
the balance,
On Mon, May 09, 2005 at 04:21:08PM -0400, Dave Nebinger wrote:
> You should ensure that you've got the little connector cable between the
> cdrom and the sound card. Personally my sound card doesn't have the
> capability to receive input from the cdrom drive, so I'm forced to use xmms
> with the c
On Mon, 09 May 2005 10:20:23 -0700, Drew Tomlinson wrote:
> >So "emerge --oneshot shadow" should restore things to their defaults.
> Setting the setuid bit on /bin/su and /bin/login fixed my login
> problems. I'm tried this suggestion and it worked. However I don't
> quite understand exactly
On 5/9/05, jack <[EMAIL PROTECTED]> wrote:
> >
> > Is there an easy way to tell which headers I've got? I'd be surprised
> > if I had 2.4 as this box has never been a 2.4 box (just built it in
> > January).
> > ___
> > mythtv-users mailing list
> > mytht
Cornelia Menzel wrote:
-snip-
> root $ mount -t auto /mnt/cdrom
>
> If somebody knows what to do, I would be really happy about it (I would like
> to hear my audio-cd's, for example).
>
Yes, u can mount even audio CD, but must have support for it.
Let's have a loo at this link: http://www.el
On Mon, 9 May 2005 16:33:30 -0400 (EDT), A. Khattri wrote:
> Dont need no damn GUI on a SERVER...
You may not need one, but there are times when Webmin comes in handy :)
--
Neil Bothwick
You can't teach a new mouse old clicks.
pgpSKsuNnBqyI.pgp
Description: PGP signature
On Monday 09 May 2005 22:21, Dave Nebinger wrote:
> > I would like to ask you how can I point my cdplayer to my
> > cdrom-device?
>
> You should ensure that you've got the little connector cable between
> the cdrom and the sound card. Personally my sound card doesn't have
> the capability to recei
Am Montag, den 09.05.2005, 16:21 -0400 schrieb Dave Nebinger:
> > I would like to ask you how can I point my cdplayer to my cdrom-device?
>
> You should ensure that you've got the little connector cable between the
> cdrom and the sound card. Personally my sound card doesn't have the
> capability
Hi,
I can not halt my PC, 'cause when lm_sensors stop, the system freezes.
The problem, how I see, that rmmod i2c_viapro can not succeed, cause of
Device or resource busy. What can occupy the module in the late state of
shutdown? My /etc/conf.d/lm_sensors is the following (generated by
sensors-det
Dave Nebinger wrote:
>>but most of my cd's that I have burned or normal audio-cd's, I am not able
>>to mount. Not as user and not as root.
>>
>>
>
>Ah, correct me if I'm wrong but I don't think you can mount audio cd's...
>
>
>
>
Nope, you are right, you cannot mount Audio CD 's as they do n
On Sun, 8 May 2005, Pingveno wrote:
> I don't have a suggestion, but I'm very sympathetic. I've always hated
> Apache configuration, it seems like a mass of well-hidden options
> without a robust gui designed to give web site admins a headache. :-)
Dont need no damn GUI on a SERVER...
Those of u
On Sat, 7 May 2005, Pere Gentoo wrote:
> Yes, of course, this is the unique differences between runlevel 3 and
> 5, but I think it should be enough, isn't it?
>
> I think have or not have the X working was a big difference about
> resource using, isn't it? Why not maintain this difference with a r
On Monday 09 May 2005 12:45, Allan Spagnol Comar wrote:
> so I can run gcc-config -l now but what should I expect from
> this command ?
It'll list all gcc available in your system,
for example I get
[22:21] [EMAIL PROTECTED]:~]$ gcc-config -l
[1] i686-pc-linux-gnu-3.2.1
[2] i686-pc-linux-gnu
> I would like to ask you how can I point my cdplayer to my cdrom-device?
You should ensure that you've got the little connector cable between the
cdrom and the sound card. Personally my sound card doesn't have the
capability to receive input from the cdrom drive, so I'm forced to use xmms
with t
Hello everybody!
Thank you Aaron for your posting, at the moment I received your e-mail I was
just reading an article about mounting
cd's and that audio cd's cannot be mounted ;-)
I would like to ask you how can I point my cdplayer to my cdrom-device? I am
using (well, I am trying to use ...)
Neil Bothwick wrote:
>On Sun, 08 May 2005 19:25:08 -0700, rob3 wrote:
>
>
>
>>For using CDRW, etc I only know about how to use ide-scsi by passing to
>>the kernel during boot. But I get a warning during boot that it is
>>deprecated, and instead I should be using ide-cd and give dev=/dev/hdX
>>
Michael Haan wrote:
>Can anyone help?
>
>
I just bought one and recently got it working :)
I'm not quite sure why you're having those problems. Maybe you don't
have dvb or v4l2 support compiled either into your kernel or as modules?
By the way, just as a sidenote, the order I modprobed the d
* On Mon May-09-2005 at 10:57:47 AM +0200, Martin Carpella said:
> Sami Samhuri <[EMAIL PROTECTED]> writes:
>
> > I think you might be looking for this command (normal user):
> >
> > % xhost +localhost
>
> Note however that this can be dangerous, as now every local user could
> send you a window
On 5/9/05, Jonathan Watmough <[EMAIL PROTECTED]> wrote:
> Google for 'gentoo linux-headers' or similar.
>
> I think you still may have the 2.4 kernel headers installed rather than the
> 2.6 headers.
>
> In this case, the drivers will build, and then fail when they see a
> different kernel, with d
Many thanks for the help with OpenOffice. I now have it working. Its a
great program. Wow, MS Word files and .pdf. I haven't even scratched
the surface of it all yet. The OpenOffice people have sure done a great
job.
The Genoo mailing lists are great. They are on par with the FreeBSD and
Ope
> But gcc is probably something special, and I never dared to touch it...
Thanks.
This is exaclty what I was trying to ask: if gcc should be treated
differently than
any other package when it comes to using a newer (unstable) version.
My guess is that unmasking gcc is not the only thing needed her
Le lundi 09 mai 2005 à 13:41 -0400, A. R. a écrit :
> Hello,
>
> I am currently using GCC 3.3.5-20050130, but I would like to give
> GCC 3.4.3.20050110-r2 a try, it is currently masked by keyword "~x86".
> Is it enough to add gcc to the /etc/portage/package.keywords file
> and then emerge it?
>
>
> If somebody knows what to do, I would be really happy about it (I would like
> to hear my audio-cd's, for example).
aaah! Now it's making sense! You can't mount *audio* CD's because
they don't contain a filesystem.
Just point your favorite CD-player software directly to the CD *devic
> but most of my cd's that I have burned or normal audio-cd's, I am not able
> to mount. Not as user and not as root.
Ah, correct me if I'm wrong but I don't think you can mount audio cd's...
--
gentoo-user@gentoo.org mailing list
On Mon, 09 May 2005 18:50:45 +0300, Rumen Yotov wrote:
> * The qpkg and etcat tools are deprecated in favor of equery and
> * are no longer installed in /usr/bin in this release.
> * They are still available in
> /usr/share/doc/gentoolkit-0.2.1_pre2/deprecated/
> * if you *really* want to use
Thanks to everybody for answering to my posting.
Now I was able as a normal user to mount a cdrom with:
paul # mount /mnt/cdrom
but most of my cd's that I have burned or normal audio-cd's, I am not able to
mount. Not as user and not as root.
I've got the following message. As user: "I've could
Hello,
I am currently using GCC 3.3.5-20050130, but I would like to give
GCC 3.4.3.20050110-r2 a try, it is currently masked by keyword "~x86".
Is it enough to add gcc to the /etc/portage/package.keywords file
and then emerge it?
Is there a Gentoo-related guide to this somewhere?
Thanks in adv
Hello all,
I am happy to report it is solved.
Solution? simple
emerge libIDL
Thanks for your help
Lubos
On 5/3/05, Neil Bothwick <[EMAIL PROTECTED]> wrote:
> On Sun, 1 May 2005 17:31:32 +0200, Lubos Kolouch wrote:
>
> > how to convince liborbit not to use i386- ?
>
> Have you changed CH
On 5/9/2005 4:17 AM Neil Bothwick wrote:
On Sun, 08 May 2005 17:53:26 -0700, Drew Tomlinson wrote:
OK, I've done some more reading and found that the reason I couldn't
use 'su' as myself was because /bin/su didn't have the setuid bit set.
So in all my fooling around, I have file ownership and mo
Willie Wong wrote:
>Oops, my bad. Thanks to Mike, Rumen, and Jason.
>
>I couldn't remember which packages they were from, and, obviously,
>
>qpkg -f `which qpkg`
>
>didn't help in this case.
>
>Yet another instances of emerge messages going past quicker than my
>eyes can catch them.
>
>Best
Check the mail list for this subject. There was an extensive discussion a few
weeks back.
>
> From: Hareesh Nagarajan <[EMAIL PROTECTED]>
> Date: 2005/05/08 Sun PM 10:10:03 EDT
> To: gentoo-user@lists.gentoo.org
> Subject: [gentoo-user] Problem with cdrecord (``cannot allocate ...")
>
> Hi All:
On 5/9/05, Kyle Rose <[EMAIL PROTECTED]> wrote:
> > I would have been able to tell you had I been at home. Sorry. My
> > motherboard is the EpOX EP-9NDA3+
> > (http://www.epox.com/USA/product.asp?id=EP-9NDA3plus).
>
> Well, from looking at the specs, I can suggest the following:
>
> "Two S-ATA
Oops, my bad. Thanks to Mike, Rumen, and Jason.
I couldn't remember which packages they were from, and, obviously,
qpkg -f `which qpkg`
didn't help in this case.
Yet another instances of emerge messages going past quicker than my
eyes can catch them.
Best,
W
On Tue, May 10, 2005 at 1
On Tuesday 10 May 2005 00:33, Willie Wong wrote:
> There has long been talk of deprecating etcat and qpkg in favor of
> equery, has that been finalized? I updated to portage-2.0.51.21-r1
> yesterday and can no longer find the etcat and qpkg commands.
>
> And what is it with the changelogs? Maybe I'
Willie Wong wrote:
>There has long been talk of deprecating etcat and qpkg in favor of
>equery, has that been finalized? I updated to portage-2.0.51.21-r1
>yesterday and can no longer find the etcat and qpkg commands.
>
>And what is it with the changelogs? Maybe I've looked in the wrong
>place, b
On Monday 09 May 2005 16:33, Willie Wong wrote:
> There has long been talk of deprecating etcat and qpkg in favor of
> equery, has that been finalized? I updated to portage-2.0.51.21-r1
> yesterday and can no longer find the etcat and qpkg commands.
>
> And what is it with the changelogs? Maybe I'v
Ciaran McCreesh wrote:
>
> Our mailing list software is throwing a hissy fit and inserting double
> subject lines. It might be confusing some email clients...
>
Yes, it made serious troubles to my Mozilla (and me) ...
accessing mail via IMAP server.
This script removes broken subject line from m
On 5/9/05, Kyle Rose <[EMAIL PROTECTED]> wrote:
> > I don't recall the name, but whichever is the more current. I tried
> > it with the older one, and got a whole bunch of unexpectedness, so
> > switched back. It's odd, but with 2.6.9 it all just works, but
> > anything above that and the machine
Calvin Spealman schreef:
> On 5/9/05, Dave Nebinger <[EMAIL PROTECTED]> wrote:
>
>>You're looking at years worth of standards that have been built up and
>>saying after all of that time they need to be changed.
>
>
> Yeah, things change.
Two words: the wheel.
Holly
--
gentoo-user@gentoo.org
There has long been talk of deprecating etcat and qpkg in favor of
equery, has that been finalized? I updated to portage-2.0.51.21-r1
yesterday and can no longer find the etcat and qpkg commands.
And what is it with the changelogs? Maybe I've looked in the wrong
place, but I didn't see that chang
On 5/9/05, Kyle Rose <[EMAIL PROTECTED]> wrote:
> > I've tried on a few occasions to upgrade my kernel beyond 2.6.9.
> > Unfortunately, doing so seems to break support for my onboard SATA
> > controllers.
>
> Which driver are you using? SCSI (libata) or the IDE driver?
>
> Kyle
>
I don't recal
> Nick Rout schreef:
> > I have an M9000 epia mini-itx box. It chokes on ffmpeg per the error
> > message later on.
-I'/var/tmp/portage/ffmpeg-0.4.9_p20050226-r3/work/ffmpeg-0.4.9-p20050226-shared'
Nick,
emerge sync? I seem to have -r5 and am not having this problem. I
do have mmx turned on.
On Mon, 9 May 2005 10:38:39 -0400, Calvin Spealman wrote:
> The replies would include instructions for which sections of the
> original messages to quote.
From where would it get those instructions when the person proposing the
method can't even place his replies in context?
--
Neil Bothwick
On 5/9/05, Dave Nebinger <[EMAIL PROTECTED]> wrote:
> Calvin, you're whole problem appears to be that the email on the list should
> be modified to support your own desires. Posting in html because you prefer
> it. Top posting to responses rather than scrolling to the bottom of the
> quoted text
I remember I had some errors message when running setup too. I don't
know the reason, but it seems there was problems with the .openoffice
directory in my home directory, so I deleted this .openoffice
directory, re-ran setup, and this solve the problem.
Casper
> > > Ric de France wrote:
> > >>
Harry Putnam wrote:
sudo cd dir
sudo: cd: command not found
sudo will execute its arguments. 'cd' can't be executed, it is a shell
builtin.
Try:
$ sudo bash -c "cd dir; do_what_you like"
Christoph
--
echo mailto: NOSPAM !#$.'<*>'|sed 's. ..'|tr "<*> !#:2" [EMAIL PROTECTED]
--
gentoo-user@gent
The replies would include instructions for which sections of the
original messages to quote.
On 5/9/05, Neil Bothwick <[EMAIL PROTECTED]> wrote:
> On Sat, 7 May 2005 16:56:09 +, Calvin Spealman wrote:
>
> > If the mailers follow the proper multipart protocols and also make it
> > easy to hide
> If the mailers follow the proper multipart protocols and also make it
> easy to hide quoted emails, move to see the original ones, etc (to add
> incentives to use the protocol), then support for it can grow until
> everyone will have updated just over time. once you know someone's
> reader has su
Harry Putnam wrote:
> I'm noticing a problem using sudo where the builtin cd command is not
> known under sudo.
>
> User attempts to `ls dir', receives `permission denied' ( its a root
> owned dir)
>
> User uses `sudo ls dir', and is queried for password, sudo then prints the
> ls display when pa
On Monday May 9 2005 05:57, Hareesh Nagarajan wrote:
> I used this recipe and I'm now able to connect to an XServer as root
> (I need K3B to work as root you see!)
Unless you really want to you don't have to. Just add yourself to the
"burning" and "cdrw" groups and you should be set. :)
Dmitri
-
I tried the xvattr command suggested, and now the videos play a very
dark green. I dont know if that is progress in finding a clue or not..
On 5/8/05, W.Kenworthy <[EMAIL PROTECTED]> wrote:
> Do you have a laptop or multi-output video card? On my laptop system, I
> get video on the laptop screen,
On 5/9/05, Robert Tsai <[EMAIL PROTECTED]> wrote:
> If you feel like debugging, it looks like you don't have all the
> modules compiled and/or installed; cx88-dvb depends on some other
> module that provides tveeprom_xxx, etc.
>
> More simply, the pchdtv.com website says the drivers are already
>
I'm noticing a problem using sudo where the builtin cd command is not
known under sudo.
User attempts to `ls dir', receives `permission denied' ( its a root
owned dir)
User uses `sudo ls dir', and is queried for password, sudo then prints the
ls display when password is supplied.
All good so far
I got the same problem here. There is a quick work-around this:
When /dev/sda is available you can do cfdisk as root this will somehow
display the proper partition table (fdisk wont) and everything is ready
(/dev/sda1 is created). I suspect the problem is in chipset driver because the
same usbst
Am Montag, 9. Mai 2005 16:57 schrieb ext Cornelia Menzel:
> On 14:06 Mon 09 May , Dirk Heinrichs wrote:
> > Am Montag, 9. Mai 2005 15:48 schrieb ext Cornelia Menzel:
> > > /dev/cdroms/cdrom0/mnt/cdrom autousers,noauto,rw
> > > 0 0
> >
> > rw?
>
> Is something wrong wi
Thanks
On 5/9/05, Phil Sexton <[EMAIL PROTECTED]> wrote:
> On Mon, 2005-05-09 at 06:39, Allan Spagnol Comar wrote:
> > cool, thanks, but, how I got to unmask a package ?
>
> Create and edit /etc/portage/package.keywords and add
> to it.
>
> Or, from the root command line, command something
Hello all!
Does anyone know of a minimalist gentoo LiveCD equiped with DISTCC?
Can it be done in a simple way with catalyst by modifing gentoo
minimal livecd spec?
--
Regards
Karol Krzak
--
gentoo-user@gentoo.org mailing list
On Mon, 9 May 2005 14:57:32 +, Cornelia Menzel wrote:
> > > /dev/cdroms/cdrom0/mnt/cdrom auto
> > > users,noauto,rw 0 0
> >
> > rw?
>
> Is something wrong with that? I thought ro for readonly and rw for read
> +write. My cd-rom device is a cd-writer.
In this context,
Cornelia Menzel wrote:
Is something wrong with that? I thought ro for readonly and rw for read+write. My cd-rom device is a cd-writer.
You can't mount a CDRW-drive for writing. That would need a DVD-RAM drive. For
normal CD-writers you need special software for writing iso9660 images to the
disc
On 14:06 Mon 09 May , Dirk Heinrichs wrote:
> Am Montag, 9. Mai 2005 15:48 schrieb ext Cornelia Menzel:
> > /dev/cdroms/cdrom0 /mnt/cdrom autousers,noauto,rw 0 0
>
> rw?
Is something wrong with that? I thought ro for readonly and rw for read+write.
My cd-rom device is a cd
On Mon, 2005-05-09 at 06:39, Allan Spagnol Comar wrote:
> cool, thanks, but, how I got to unmask a package ?
Create and edit /etc/portage/package.keywords and add
to it.
Or, from the root command line, command something like this if I want
mozplugger on my AMD 950 processor box:
echo net-www/m
Cornelia Menzel wrote:
This is my /etc/fstab:
...
/dev/cdroms/cdrom0 /mnt/cdrom auto users,noauto,rw 0 0
change this line to:
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 user,noauto,ro 0 0
> When I try to mount the device with:
> paul # mount /dev/cdroms/cdrom0 /mnt/cdrom
> the system gives
On Mon, 9 May 2005 13:48:19 +, Cornelia Menzel wrote:
> This is my /etc/fstab:
> /dev/cdroms/cdrom0/mnt/cdrom auto users,noauto,rw0 0
Apart from replacing rw with ro, this is correct.
> When I try to mount the device with:
> paul # mount /dev/cdroms/cdrom0 /mnt/cdrom
>
Cornelia Menzel wrote:
> When I try to mount the device with:
> paul # mount /dev/cdroms/cdrom0 /mnt/cdrom
> the system gives back:
> mount: only root can do that!
Try just:
mount /mnt/cdrom
That way, it will look at the settings you have put in fstab.
Daniel
--
gentoo-user@gentoo.org mailing
Am Montag, 9. Mai 2005 15:48 schrieb ext Cornelia Menzel:
> /dev/cdroms/cdrom0/mnt/cdrom autousers,noauto,rw 0 0
rw?
> When I try to mount the device with:
> paul # mount /dev/cdroms/cdrom0 /mnt/cdrom
> the system gives back:
> mount: only root can do that!
Not quite sure, b
In order to install vtk-4.2 I downloaded the appropriate tarball. When I
try '$ cmake .' in the VTK dir after unpacking I get:
.
./VTK/CMake/libcmVTK_WRAP_TCL2.so: failed to map segment from shared
object: Operation not permitted
.
As '$ ldd libcmVTK_WRAP_TCL2.so' says "not a dynamic e
On Mon, 09 May 2005 13:24:28 +0200, Holly Bostick wrote:
> Are you sure this is a reiser4 problem and not a K3b limitation? I have
> found that K3b will not properly burn data CDs over about 2GB (*.iso
> files converted to CD are fine, I just mean for example a *.mpg or some
> such burned as data)
Hello everybody!
I am new to Gentoo. I have installed Gentoo 2005.0 on my laptop (hp pavilion
ze4288, AMD Mobile XP 2200, 512 MB, 30 GB
harddisk, Toshiba CD-Rom) and everything is looking good, but now I realised
that I do not have any access to my CD-Rom
device as a normal user.
This is my /
Robert Persson schreef:
> Has anyone else had a problem in which reiser4 loses a file, but fsck.reiser4
> can't find anything wrong?
>
> I was trying to burn a large file to dvd+rw but k3b would just ignore it. It
> would therefore spend very little time writing the dvd, but a long time
> verif
On Sun, 08 May 2005 17:53:26 -0700, Drew Tomlinson wrote:
> OK, I've done some more reading and found that the reason I couldn't
> use 'su' as myself was because /bin/su didn't have the setuid bit set.
> So in all my fooling around, I have file ownership and modes screwed up
> from the default.
Nick Rout schreef:
> I have an M9000 epia mini-itx box. It chokes on ffmpeg per the error message
> later on.
>
> As the message relates to mmx in some way, I also include cat
> /proc/cpuinfo which shows the mmx flag, so I have the mmx USE flag
> turned on.
>
> [EMAIL PROTECTED] narnia $ cat /p
Thank you Francesco, I am little far away from my machine now :( (
snip ), but I had tryed to get gcc from the stage 3 once and do not
had worked well but I guess i made some mistakes
so I can run gcc-config -l now but what should I expect from this command ?
Thank you for your att
cool, thanks, but, how I got to unmask a package ?
On 5/8/05, Roy O. Wright <[EMAIL PROTECTED]> wrote:
> I had the same problem. I used the latest masked version of howl and
> got around it.
>
> HTH,
> Roy
>
> --
> gentoo-user@gentoo.org mailing list
>
>
--
gentoo-user@gentoo.org mailing lis
On 5/8/05, Dmitri Vassilenko <[EMAIL PROTECTED]> wrote:
> On Sunday May 8 2005 22:14, Hareesh Nagarajan wrote:
> > How do I enable programs which are executed by the root to connect to
> > the X server?
>
> I think if you're doing this locally, you can just copy .Xauthority in the
> directory of t
Sami Samhuri <[EMAIL PROTECTED]> writes:
> I think you might be looking for this command (normal user):
>
> % xhost +localhost
Note however that this can be dangerous, as now every local user could
send you a window to your X-server, not only root.
Regards,
Martin
--
gentoo-user@gentoo.org mai
Has anyone here managed to get gnome-power to play nice??
I tried the ebuild overlay from a gentoo dev (forgot URL) but it isn't
working.
This is hal-0.5.1.tar.gz
For one thing, the hal ebuild states I have to start hald but there
isn't an initscript with the ebuild and I start it by hand and no
emerge openoffice-bin
On 5/9/05, Brett I. Holcomb <[EMAIL PROTECTED]> wrote:
> If I remember correctly as a user I had to run the setup command. OOo is
> installed, then you do another install as a user and have a choice of
> network, or other type install.
>
>
> On Mon, 9 May 2005, Rob wrote
Are you using su for beeing root ? In that case have a look at sux (which permit to give access to x for root in sudo mode).On 5/9/05, Sami Samhuri <
[EMAIL PROTECTED]> wrote:* On Sun May-08-2005 at 09:14:15 PM -0500, Hareesh Nagarajan said:
> Hi All:>> How do I enable programs which are executed b
On Sun, 08 May 2005 19:25:08 -0700, rob3 wrote:
> For using CDRW, etc I only know about how to use ide-scsi by passing to
> the kernel during boot. But I get a warning during boot that it is
> deprecated, and instead I should be using ide-cd and give dev=/dev/hdX
> as device. So I tried putting
1 - 100 of 108 matches
Mail list logo
