Anybody know what this error is about? I can't seem to build wine.
i686-pc-linux-gnu-gcc -c -I. -I. -I../../include -I../../include
-DINCLUDEDIR=\/usr/include/wine\ -Wall -pipe
-mpreferred-stack-boundary=2 -fno-strict-aliasing -gstabs+
-Wpointer-arith -march=pentium4 -pipe -O2 -o y.tab.o
On Wed, 19 Apr 2006 18:11:55 -0700, Robert Persson wrote:
Am I correct in understanding that I can use LVM2 to stripe a volume
across more than one disk, just like a raid 0 setup, even if the disks
are quite dissimilar? Would it be possible (or worthwhile) to allocate
my old 40GB disk and a
sorry if you are geting this twice as I have also posted to the amd64 list
Hello All,
I figure I will also give this information to this list as I was asked
some questions from the amd list.
Frist part is this is not a live cd, it is booting off of the hard drive.
Next thing is all of the
Christopher E [EMAIL PROTECTED] wrote:
the motherboard is a Asus K8V Delux SE
I had a similar problem with Asus A8V, sata disk not recognised.
Later I found out that southbridge (VT8251) was not supported...
On your mobo there is VIA VT8237 southbridge, check if this is
supported by kernel
On Thu, 2006-04-20 at 03:12 -0400, Justin Hart wrote:
Anybody know what this error is about? I can't seem to build wine.
i686-pc-linux-gnu-gcc -c -I. -I. -I../../include -I../../include
-DINCLUDEDIR=\/usr/include/wine\ -Wall -pipe
-mpreferred-stack-boundary=2 -fno-strict-aliasing -gstabs+
Hello Jarry,
I am able to get into the system with the current setup that is the
strange thing, I am NOT using the liveCD any more, I am booting using
GRUB, it loads the kernel and then it prompts me for a root block
device and then I enter /dev/sda6 --- this is my sata drive and when
I do this
Title: Looking for best tutorial on creating initramfs
Need to find a better tutorial on initramfs. One that doesn't rely on tools that automate the process.
Am Donnerstag, 20. April 2006 15:05 schrieb ext Johnson, Maurice E CTR
NSWCDL-K74:
Need to find a better tutorial on initramfs. One that doesn't rely on
tools that automate the process.
Better than what?
Bye...
Dirk
--
Dirk Heinrichs | Tel: +49 (0)162 234 3408
On 4/20/06, Christopher E [EMAIL PROTECTED] wrote:
I am able to get into the system with the current setup that is the
strange thing, I am NOT using the liveCD any more, I am booting using
GRUB, it loads the kernel and then it prompts me for a root block
device and then I enter /dev/sda6 ---
Hi,
On Thu, 20 Apr 2006 08:05:50 -0500 Johnson, Maurice E CTR NSWCDL-K74
[EMAIL PROTECTED] wrote:
Need to find a better tutorial on initramfs. One that doesn't rely on
tools that automate the process.
In fact, an initramfs doesn't differ much from other root fs'es.
Physically, it is a gzipped
Christopher E [EMAIL PROTECTED] wrote:
I am able to get into the system with the current setup that is the
strange thing, I am NOT using the liveCD any more, I am booting using
GRUB, it loads the kernel and then it prompts me for a root block
Well, I'm not using GRUB, but I think that the way
Hello
http://gentoo-wiki.com/HOWTO_Download_Cache_for_LAN-Http-Replicator
seems to be woefully out of date. I just had my lan-http-replicator
server die and it took a while to figure out how to turn it off replicator
(on a client machine) I had to look at /etc/profile.env and then issue:
export
i recommend you to use torpage
http://www.kroon.co.za/torpage.php
--
Ing. Anielkis Herrera González
Desarrollador de Nova LNX
Linux User #377809
Universidad de las Ciencias Informáticas
On 4/20/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Well, I'm not using GRUB, but I think that the way GRUB
reads disks has very little (if anything) common with linux.
Not only it gives different names to disk-partitions, grub
is like mini-OS, which uses its own routines. It can be
that
anyone know if you can compile something locally into your home
directory using portage without being root?
basically what I want to accomplish is like...
ROOT=/home/lamotte/compile emerge openssh
or
ebuild /path/to/ebuild/ merge
I would basically like to be able to install something without
Richard Fish wrote:
No. both grub and lilo work through the system BIOS. Neither can
'see' things not provided through the system BIOS.
Are you absolutely sure about lilo?
lilo used bios for disk sector read, but I think is not using
anymore (quite a long time). Thanks to that you can have
On 4/19/06, Maxime Robert-Schreyers [EMAIL PROTECTED] wrote:
Dan LaMotte wrote:
I use the /etc/portage/package.* files for unmasking packages.
Just curious if there were any packages out there to help keep those
files organized. Basically, if the package comes out of package.mask,
is
Hi Jeremy,
Sieb, Glenn E (Glenn) wrote:
Is there a way I can change this so that eth0/1 are the on-board
ports? It will save me lots of headaches later. :)
You are looking for udev. Udev will create names for devices
(USB drives, NICs, etc)
Hi,
after updating ndiswrapper to version 1.13 i became unable to use it.
I get this in dmesg:
ndiswrapper: Unknown symbol wrap_suspend_urbs
ndiswrapper: Unknown symbol wrap_resume_urbs
Assuming that the problem could be departing from the upgrade, I downgrade it to 1.11, but could not solve the
hi;
a mate at work is using KDE (actually, he has Slackware, not Gentoo,
but I guess it's the same). All of a sudden, a strange thing happened:
When he logs in his account, the keyboard has a really long delay (about
half a second) to echo each pressed key. So to write, say, 'no', he has
to press
After updating lvm2 from 2.02.02 to 2.02.03, the system mount / which
is on a primary partition but frefus to mount /usr,/var,/home and /tmp.
On the console I see:
Setting up the logical volume manager
Volume group for uuid not found: m6reV.(four times)
Any idea?
Thanks
--
On Thursday 20 April 2006 20:50, Matias Grana wrote:
hi;
a mate at work is using KDE (actually, he has Slackware, not Gentoo,
but I guess it's the same). All of a sudden, a strange thing
happened: When he logs in his account, the keyboard has a really long
delay (about half a second) to echo
Matias Grana wrote:
thing happened: When he logs in his account, the keyboard has a
really long delay (about half a second) to echo each pressed key.
KDE Control Center Regional ... Accessibility
Keyboard Filters Slow Keys.
Benno
--
gentoo-user@gentoo.org mailing list
On 4/20/06, Matias Grana [EMAIL PROTECTED] wrote:
hi;
a mate at work is using KDE (actually, he has Slackware, not Gentoo,
but I guess it's the same). All of a sudden, a strange thing happened:
When he logs in his account, the keyboard has a really long delay (about
half a second) to echo
Hi.
I am a new gentoo user here. I downloaded gentoo 2.6 liveCD from gentoo
website. After couple time trying, finally I successfully complete the
installing. But, after log in, I only get a xterm window and a session
window. I think suppose I should get a graphic user interface like boot
[EMAIL PROTECTED] writes:
After updating lvm2 from 2.02.02 to 2.02.03, the system mount / which
is on a primary partition but frefus to mount /usr,/var,/home and /tmp.
On the console I see:
Setting up the logical volume manager
Volume group for uuid not found: m6reV.(four times)
I think suppose I should get a graphic user interface
I) think the first thing is to configure X (/etc/X11/xorg.conf). THen
try startx.
Best regards
ce
--
gentoo-user@gentoo.org mailing list
On 4/20/06 2:25 PM, Bob Bao [EMAIL PROTECTED] wrote:
Hi.
I am a new gentoo user here. I downloaded gentoo 2.6 liveCD from gentoo
website. After couple time trying, finally I successfully complete the
installing. But, after log in, I only get a xterm window and a session
window. I
You have to install X and a window manager or app like KDE to get that.
From: Bob Bao [EMAIL PROTECTED]
Date: 2006/04/20 Thu PM 03:25:28 EDT
To: gentoo-user@lists.gentoo.org
Subject: [gentoo-user] Install help
Hi.
I am a new gentoo user here. I downloaded gentoo 2.6 liveCD from
On 4/20/06, Bob Bao [EMAIL PROTECTED] wrote:
Hi.
I am a new gentoo user here. I downloaded gentoo 2.6 liveCD from gentoo
website. After couple time trying, finally I successfully complete the
installing. But, after log in, I only get a xterm window and a session
window. I think suppose I
Bob Bao wrote:
Hi.
I am a new gentoo user here. I downloaded gentoo 2.6 liveCD from gentoo
website. After couple time trying, finally I successfully complete the
installing. But, after log in, I only get a xterm window and a session
window. I think suppose I should get a graphic user
On 4/20/06, Jarry [EMAIL PROTECTED] wrote:
Richard Fish wrote:
No. both grub and lilo work through the system BIOS. Neither can
'see' things not provided through the system BIOS.
Are you absolutely sure about lilo?
Checking the source and the README in the source of 22.7.1 makes it
Hello everybody,
When I try to dialup the 'net on a fresh 2.6.16
install I get:
#pon isp
/usr/sbin/pppd: In file /etc/peers/hd: unrecognized
option '/dev/ttyS0'
Sure enough, there's no such file, just /dev/tty, 0, 1
... On my 2.6.12 and 2.6.15 boxen /dev/ttyS0 is a
sym-link to tts/0 and I can
On Thursday 20 April 2006 00:46 Neil Bothwick was like:
Am I correct in understanding that I can use LVM2 to stripe a volume
across more than one disk, just like a raid 0 setup, even if the disks
are quite dissimilar? Would it be possible (or worthwhile) to allocate
my old 40GB disk and a
I've tried everything I can think of.
* When I use foomatic-gui to delete the printer, I get a message
that confirms the deletion, but when I reboot it's back! In my
case, I think foomatic-gui invokes foomatic-configure -s cups
-R -n queuename which in turn invokes
In /etc/rc.conf:
Uncomment #DISPLAYMANAGER=xdm (you do this by removing the # in case
you didn't know)
If you are using Gnome, change xdm to gdm, and to kdm if you are using kde.
Then, do rc-update add xdm default and it should start up at boot.
On 4/20/06, Farhan Ahmed [EMAIL PROTECTED] wrote:
On Fri, 2006-04-21 at 01:11 +0530, Farhan Ahmed wrote:
Bob Bao wrote:
Hi.
I am a new gentoo user here. I downloaded gentoo 2.6 liveCD from gentoo
website. After couple time trying, finally I successfully complete the
installing. But, after log in, I only get a xterm window and a
echo exec startkde ~/.xinitrc
next time you execute 'startx', kde will startup.
for GNOME, execute this command first
echo exec gnome-session ~/.xinitrc
then startx will bring gnome up.
I think the more offical way is to uncomment the following lines
in /etc/rc.conf:
On Thu, 2006-04-20 at 14:25 -0500, Bob Bao wrote:
Hi.
I am a new gentoo user here. I downloaded gentoo 2.6 liveCD from gentoo
website. After couple time trying, finally I successfully complete the
installing. But, after log in, I only get a xterm window and a session
window. I think
I don't understand this error:
--
Calculating world dependencies
!!! Packages for the following atoms are either all
!!! masked or don't exist:
net-mail/mailman net-mail/dovecot mail-mta/exim
media-sound/beep-media-player
I rebooted my server box this morning. On a few of the output lines
during bootup (noteably sshd and mysqld) it said Could not connect to
LDAP server (or something like that). To my knowledge, I don't have an
ldap server installed on my server box. Ssh from client machines is
extremely slow to
On 20/04/06, Nick Rout [EMAIL PROTECTED] wrote:
On Wed, 19 Apr 2006 21:58:29 +0200
Thierry de Coulon wrote:
[Is cups crap?]
Someone thinks so:
http://www.catb.org/~esr/writings/cups-horror.html
:-)) I guess most of us have been there?
What is *really* crap is the example addresses
On Thursday 20 April 2006 23:31, Michael Sullivan wrote:
I rebooted my server box this morning. On a few of the output lines
during bootup (noteably sshd and mysqld) it said Could not connect to
LDAP server (or something like that). To my knowledge, I don't have
an ldap server installed on
Michael Sullivan wrote on 04/20/06 23:31:
I rebooted my server box this morning. On a few of the output lines
during bootup (noteably sshd and mysqld) it said Could not connect to
LDAP server (or something like that). To my knowledge, I don't have an
ldap server installed on my server box.
On 4/20/06, Daevid Vincent [EMAIL PROTECTED] wrote:
I don't understand this error:
You masked out the versions of php greater-than *or equal to* what you
have installed, so portage naturally wants to downgrade the version.
Plus, exim only has these version available:
* mail-mta/exim
Yeah, figured out that 0.9.1 compiles fine. I'll have to try 0.9.12.
I'm trying to run iTunes.
Justin
On 4/20/06, Matthias Langer [EMAIL PROTECTED] wrote:
On Thu, 2006-04-20 at 03:12 -0400, Justin Hart wrote:
Anybody know what this error is about? I can't seem to build wine.
I was looking for a way to set the default rule for the INPUT chain to
DROP. I do not want to change the rule with iptables -P INPUT DROP after
loading the kernel, I want that the kernel/modules automatically DROPS
everything after it has been loaded.
You can do this with the FORWARD chain
On Fri, 2006-04-21 at 00:24 +0200, Dave Jones wrote:
Michael Sullivan wrote on 04/20/06 23:31:
I rebooted my server box this morning. On a few of the output lines
during bootup (noteably sshd and mysqld) it said Could not connect to
LDAP server (or something like that). To my knowledge, I
On Wed, Apr 19, 2006 at 01:30:52PM -0400, John J. Foster wrote:
Good afternoon,
For about the past 10 days I've been having problems with gst-plugins.
I'm in a constant upgrade/downgrade loop, and am not really sure what
brought me to this state. The only _major_ changes have been adding
Hi,
I want to cp -a /usr/portage to another partition to make room on /
When I will do this, all files of the portage directory will get
a new and nearly identical timestamp.
Will this hurt the packaging/compiling or anything related to
administer gentoo-thingy ?
Thank you very much in
On Friday 21 April 2006 06:35, Meino Christian Cramer wrote:
Hi,
I want to cp -a /usr/portage to another partition to make room on /
When I will do this, all files of the portage directory will get
a new and nearly identical timestamp.
Will this hurt the packaging/compiling or anything
Hello All,
I just saw this image showing settings related to user account in KControl
http://www.kbfx.org/staticpages/images/screenshots/7.png
When I check for the same under kcontrol on my system (KDE 3.5.2), I am unable
to find it. Can some please help me in finding the package needed,
On Friday 21 April 2006 07:40, Abhay Kedia wrote:
Hello All,
I just saw this image showing settings related to user account in KControl
http://www.kbfx.org/staticpages/images/screenshots/7.png
When I check for the same under kcontrol on my system (KDE 3.5.2), I am
unable to find it. Can
Sorry for the delay responding to this thread. Whilst linux users'
computers are immune to viruses, our bodies are not. I spent Tuesday
evening through late Wednesday afternoon in bed with the flu, and I'm
still not 100%.
On Tue, Apr 18, 2006 at 10:51:44AM +0800, Fr?d?ric Grosshans wrote
Le
54 matches
Mail list logo
