On Friday 04 July 2008, Florian Philipp wrote:
Hmm, good point. I will monitor the situation.
If there are any occurrences of wrong permissions, I think it will be
sufficient to make an if-clause before setting the umask but maybe it
proves unneccessary.
I think what you really want in this
Matt Harrison iwasinnamuknow at genestate.com writes:
The problem is, trying to access the cacti interface through a browser
causes a segfault with php. I've also tried running the index.php from
the CLI and it still segfaults.
You may want to try JFFNMS in lieu of Cacti?
On Thu, 3 Jul 2008 17:48:38 +0200
Florian Philipp [EMAIL PROTECTED] wrote:
Hi!
I've recently moved /boot from /dev/hda to /dev/hdd. Then I've
installed grub with
for i in /dev/hd{a,b,d}; do grub-install --recheck $i; done
Now the system boots correctly but it takes ages (10sec) to come
Hi,
I have this working but can't get a 2.6 (gentoo-sources) kernel to boot.
Help from anybody who has this working would be greatly appreciated.
Regards,
Konstantin
--
Dipl-Inf. Konstantin Agouros aka Elwood Blues. Internet: [EMAIL PROTECTED]
Otkerstr. 28, 81547 Muenchen, Germany. Tel +49 89
On Saturday 05 July 2008, Florian Philipp wrote:
On Thu, 3 Jul 2008 17:48:38 +0200
Florian Philipp [EMAIL PROTECTED] wrote:
Hi!
I've recently moved /boot from /dev/hda to /dev/hdd. Then I've
installed grub with
for i in /dev/hd{a,b,d}; do grub-install --recheck $i; done
Now the
Hi,
after reading some emails from the list I have been trying to unmerge
cdrkit and to emerge cdrtools. I aslo hat to unmerge dvd+rw-tools and
kino. Anyway I am still not able to emerge cdrtools.
!!! Cannot write to '/usr/include/scsilib/scg'.
!!! Please check permissions and directories
* KH ([EMAIL PROTECTED]) [05.07.08 13:24]:
Hi,
after reading some emails from the list I have been trying to unmerge
cdrkit and to emerge cdrtools. I aslo hat to unmerge dvd+rw-tools and kino.
Anyway I am still not able to emerge cdrtools.
!!! Cannot write to '/usr/include/scsilib/scg'.
On Saturday 05 July 2008, Sebastian Günther wrote:
P.S.: I don't use kino so just try a
# emerge -pvt kino
afterwards, to look what it tries to pull in.
I don't have cdrkit on my systems and it does not seem to have a dependency
for kino:
# emerge -pvt kino
These are the packages that
KH schrieb:
Hi,
after reading some emails from the list I have been trying to unmerge
cdrkit and to emerge cdrtools. I aslo hat to unmerge dvd+rw-tools and
kino. Anyway I am still not able to emerge cdrtools.
!!! Cannot write to '/usr/include/scsilib/scg'.
!!! Please check permissions and
Hi Jeff,
On Sunday 29 June 2008, Jeff Cranmer wrote:
Can anyone help me with the correct CUPs settings to print to an HP D7400
series printer over a wireless network?
I can access the printer's home page via the IP address, but when I set up
CUPS with the printer option socket://192.168.2.4,
On 4 Jul 2008, at 20:38, Matt Harrison wrote:
... I want to add the cacti application to the same server but on a
separate
vhost.
The problem is, trying to access the cacti interface through a browser
causes a segfault with php. I've also tried running the index.php from
the CLI and it still
Florian Philipp writes:
I've recently moved /boot from /dev/hda to /dev/hdd. Then I've
installed grub with
for i in /dev/hd{a,b,d}; do grub-install --recheck $i; done
Now the system boots correctly but it takes ages (10sec) to come from
Grub loading Stage1.5
to
Grub loading, please
Stroller wrote:
On 4 Jul 2008, at 20:38, Matt Harrison wrote:
... I want to add the cacti application to the same server but on a
separate
vhost.
The problem is, trying to access the cacti interface through a browser
causes a segfault with php. I've also tried running the index.php from
the
On Samstag, 5. Juli 2008, Daniel Pielmeier wrote:
I find it a bit sad that cdrkit is the preferred cd burning application
because it satisfies the cdrtools virtual first. This means when you
have neither cdrkit nor cdrtools installed cdrkit is preferred. However
i could not find out why.
k
On Sat, 5 Jul 2008 12:18:28 +0100
Mick [EMAIL PROTECTED] wrote:
As far as I can understand the problem arises because you have
installed grub everywhere. When your BIOS kicks in it goes to the
first disk's MBR, reads the GRUB boot code, which starts probing each
and every device where a
Volker Armin Hemmann schrieb:
On Samstag, 5. Juli 2008, Daniel Pielmeier wrote:
I find it a bit sad that cdrkit is the preferred cd burning application
because it satisfies the cdrtools virtual first. This means when you
have neither cdrkit nor cdrtools installed cdrkit is preferred. However
i
Daniel Pielmeier [EMAIL PROTECTED] wrote:
So you successfully unmerged cdrkit, dvd+rw-tools and kino. The
installation of cdrtools fails because of a broken symlink. I guess the
/usr/include/scsilib/scg symlink to usr/include/scsilib/usal has not
been removed with cdrkit and is now broken and
Just as a reminder:
http://www.gentoo.org/news/20080701-bugday.xml
What: Gentoo contributors get together to help each other fix bugs
Where: irc.freenode.net, #gentoo-bugs
When: Saturday, July 5, in a timezone near you
What do you need to bring?
* A Gentoo system, an Internet connection
On Saturday 05 July 2008, Florian Philipp wrote:
On Sat, 5 Jul 2008 12:18:28 +0100
Mick [EMAIL PROTECTED] wrote:
As far as I can understand the problem arises because you have
installed grub everywhere. When your BIOS kicks in it goes to the
first disk's MBR, reads the GRUB boot code,
Joerg Schilling schrieb:
Daniel Pielmeier [EMAIL PROTECTED] wrote:
So you successfully unmerged cdrkit, dvd+rw-tools and kino. The
installation of cdrtools fails because of a broken symlink. I guess the
/usr/include/scsilib/scg symlink to usr/include/scsilib/usal has not
been removed with
Daniel Pielmeier [EMAIL PROTECTED] wrote:
Joerg Schilling schrieb:
Daniel Pielmeier [EMAIL PROTECTED] wrote:
So you successfully unmerged cdrkit, dvd+rw-tools and kino. The
installation of cdrtools fails because of a broken symlink. I guess the
/usr/include/scsilib/scg symlink to
On Sat, 28 Jun 2008 22:24:46 +0300
Daniel Iliev [EMAIL PROTECTED] wrote:
On Sat, 28 Jun 2008 14:02:23 +0200
Florian Philipp [EMAIL PROTECTED] wrote:
Hi list!
I a PC of mine I've got two 160GB and a 320GB disk. I'd like to
create a JBOD (a.k.a. Concatenation) of the two 160GB disks
On Samstag, 5. Juli 2008, Joerg Schilling wrote:
Installing the includefiles from libscg into /usr/include/scsilib/scg makes
them unusable as there is no software that is aware of this location.
wrong. It is easy to tell software which needs/wants that headers the right
directory. If there
For some reason when I run Ekiga it doesn't detect any v4l or v4l2
drivers...Only picture...
[EMAIL PROTECTED] ~ % ekiga -d 4
2008/07/05 12:26:35.597 0:00.090ekiga Detected audio
plugins: ALSA
2008/07/05 12:26:35.598 0:00.091ekiga Detected
On Sat, 5 Jul 2008 15:06:31 +0100
Mick [EMAIL PROTECTED] wrote:
I've already changed the BIOS boot order to look at /dev/hdd's MBR
first but that didn't help.
Right, have you checked your device.map to see if there's anything
untoward in there?
(fd0) /dev/fd0
(hd0) /dev/hda
(hd1)
On Sat, 2008-07-05 at 12:28 -0400, Michael Pobega wrote:
For some reason when I run Ekiga it doesn't detect any v4l or v4l2
drivers...Only picture...
Does the OS detect your device? I.E:
1. Do you see it in dmesg?
2. Does a device get created (e.g. /dev/video0)
3. Can you
Allan Gottlieb [EMAIL PROTECTED] writes:
Which really just means the latest cvs code committed.
Thank you. I had guessed something like that, but . wouldn't
compile for me. I submitted a bug report via
M-x report-emacs-bug
and it was promptly fixed. Then . compiled and I am
On Sat, Jul 05, 2008 at 09:20:26AM +0400, Vladimir Rusinov wrote
It seems you have rsync://yourhost/ instead of
rsync://yourhost/gentoo-portage/ on your make.conf
Thank you very much. That was the exact mistake I made. It's working
properly now after I corrected it.
--
Walter Dnes [EMAIL
Joerg Schilling schrieb:
Daniel Pielmeier [EMAIL PROTECTED] wrote:
Joerg Schilling schrieb:
Daniel Pielmeier [EMAIL PROTECTED] wrote:
So you successfully unmerged cdrkit, dvd+rw-tools and kino. The
installation of cdrtools fails because of a broken symlink. I guess the
On Sat, 05 Jul 2008 14:14:17 +0200, Daniel Pielmeier wrote:
I find it a bit sad that cdrkit is the preferred cd burning application
because it satisfies the cdrtools virtual first. This means when you
have neither cdrkit nor cdrtools installed cdrkit is preferred. However
i could not find out
Neil Bothwick schrieb:
On Sat, 05 Jul 2008 14:14:17 +0200, Daniel Pielmeier wrote:
I find it a bit sad that cdrkit is the preferred cd burning application
because it satisfies the cdrtools virtual first. This means when you
have neither cdrkit nor cdrtools installed cdrkit is preferred.
i can not build gnome-keyring-manager. it tries to download templates from
www.open-oasis.org but times out. how can i resolve this so that i can continue
to build gnome?
_
The i’m Talkaton. Can 30-days of conversation change the
On Saturday 05 July 2008, Florian Philipp wrote:
On Sat, 5 Jul 2008 15:06:31 +0100
Then I've installed grub into hda's MBR. Then something odd happened:
Stage1.5 loads quiet fast but then Grub hangs once again of ~20sec
with: Grub loading, please wait ...
Since that is the moment when Grub
I've just compiled a new kernel, but when I reboot grub will not load the new
kernel. I get error 15 (file not found). But the file is there.
Yes grub is install properly and yes the boot partition was mounted when I
copied the new kernel across and changed the grub.conf. What's really
On Sunday 06 July 2008, Matthew R. Lee wrote:
I've just compiled a new kernel, but when I reboot grub will not load the
new kernel. I get error 15 (file not found). But the file is there.
Yes grub is install properly and yes the boot partition was mounted when I
copied the new kernel across
On Saturday 05 July 2008 19:15:05 Mick wrote:
On Sunday 06 July 2008, Matthew R. Lee wrote:
I've just compiled a new kernel, but when I reboot grub will not load the
new kernel. I get error 15 (file not found). But the file is there.
Yes grub is install properly and yes the boot partition
Matthew R. Lee wrote:
On Saturday 05 July 2008 19:15:05 Mick wrote:
On Sunday 06 July 2008, Matthew R. Lee wrote:
I've just compiled a new kernel, but when I reboot grub will not load the
new kernel. I get error 15 (file not found). But the file is there.
Yes grub is install properly and yes
Matt Harrison wrote:
Matthew R. Lee wrote:
On Saturday 05 July 2008 19:15:05 Mick wrote:
On Sunday 06 July 2008, Matthew R. Lee wrote:
I've just compiled a new kernel, but when I reboot grub will not
load the
new kernel. I get error 15 (file not found). But the file is there.
Yes grub is
On Saturday 05 July 2008 19:47:10 Matt Harrison wrote:
Matthew R. Lee wrote:
On Saturday 05 July 2008 19:15:05 Mick wrote:
On Sunday 06 July 2008, Matthew R. Lee wrote:
I've just compiled a new kernel, but when I reboot grub will not load
the new kernel. I get error 15 (file not found).
one question:
why don't you use 'make install' and have a 'vmlinuz' and 'vmlinuz.old' entry
in menu.lst/grub.conf?
that solves/prevents lots of errors.
--
gentoo-user@lists.gentoo.org mailing list
On Saturday 05 July 2008 20:13:20 Matthew R. Lee wrote:
On Saturday 05 July 2008 19:47:10 Matt Harrison wrote:
Matthew R. Lee wrote:
On Saturday 05 July 2008 19:15:05 Mick wrote:
On Sunday 06 July 2008, Matthew R. Lee wrote:
I've just compiled a new kernel, but when I reboot grub will
On Sat, Jul 05, 2008 at 11:41:49AM -0500, Albert Hopkins wrote:
On Sat, 2008-07-05 at 12:28 -0400, Michael Pobega wrote:
For some reason when I run Ekiga it doesn't detect any v4l or v4l2
drivers...Only picture...
Does the OS detect your device? I.E:
1. Do you see it in dmesg?
42 matches
Mail list logo
