Hello Jeroen,
The file was incomplete indeed. I have updated it. Now you can download it.
The dbpedia instances are inside.
All the best
Philip Alexiev
Senior Software Engineer
Ontotext
On 10/21/2013 08:27 AM, Jeroen Lapre' wrote:
I'm trying to follow the Example - Integrating DBpedia in KIM
of the KIM/context/default/populated
folder. This will also remove all your previously added documents. Then start
KIM again and reprocess the documents.
Ask if you have more problems.
Thank you for your interest in KIM.
Philip Alexiev
Senior Software Engineer
Ontotext
On Oct 3, 2013, at 5:05
Glad I could help.
Good luck with your PhD.
All the best
Philip Alexiev
Senior Software Engineer
Ontotext
On Oct 3, 2013, at 6:31 PM, Karl Hammar karl.ham...@icloud.com wrote:
Hi,
That explains the problem. I've now tested loading the data at initial launch
through the owlim config
.
Do you know of some existing knowledge base that can fulfill our need? Also,
guide how can we add/remove a term in the existing knowledge base.
Regards,
Naaman Musawwir.
From: Philip Alexiev [mailto:philip.alex...@ontotext.com]
Sent: Thursday, June 20, 2013 12:26 PM
To: Naaman
of the system. This is done by deleting everything
under KIM/context/default/populated/ . It will wipe all data currently in the
system and the next start will create a fresh repository. All documents
currently in the system are also removed.
Hope this helps,
Philip Alexiev
Senior Software Engineer
or not. The
tools connect to the KIM server through RMI . The process is described in the
documentation.
Hope this helps,
Philip Alexiev
Software Engineer, KIM team
On Mar 18, 2013, at 3:05 PM, Michael Patek mpa...@gmail.com wrote:
Hi Philip,
Thanks. Do you know if there are any KIM tools that can
. This can be done by performing the
following command :
KIM/bin/kim gate
You can observe and customize the different aspects of the process from this
interface.
Hope this helps.
Philip Alexiev
Software Engineer, KIM team
On Mar 14, 2013, at 10:05 PM, Michael Patek mpa...@gmail.com wrote:
Hi Phil
Hello Michael,
Why are you trying to have one KIM instance connect to another? Please share
the big picture. Most probably the goal can be achieved with one running KIM.
Best,
Phil
On Mar 14, 2013, at 6:17 PM, Michael Patek mpa...@gmail.com wrote:
Hello,
I have a fresh install of the
store. Just document
level relations (document mentions entity) .
If you provide more information about your use case and your goals, we can be
of more help.
All the best,
Philip Alexiev
Software Engineer, KIM team
On Mar 8, 2013, at 2:30 PM, Lydia Khelifa khelifaly...@gmail.com wrote:
hello
Hello Cong Nguyen,
We have updated the KIM installation provided for evaluation purposes on our
site. You can download KIM platform 3.7 now with evaluation licenses until
01.05.2013 .
All the best,
Philip Alexiev
Software Engineer, KIM team
On Feb 6, 2013, at 9:07 AM, Cong Nguyen congnh0
Hello Srecko,
I believe you will find the GATE documentation very useful. It is a
comprehensive description of the extraction and components that are also used
in KIM. The major difference between, and the reason why we have some of the
components slightly customized for KIM, is that GATE is a
Hello Jie Gao,
Can you send an example pipeline (including the documents in it) that
demonstrates these cases.It will be very helpful for understanding the
context.
Thank you,
Philip Alexiev
Software Engineer, KIM team
On 08/31/2012 01:16 PM, JIE GAO wrote:
Hi, ontotext team:
I am
:
http://www.ontotext.com/kim/getting-started/documentation
Hope this helps,
Philip Alexiev
Software Engineer, KIM team
On 08/25/2012 06:48 PM, afiont...@aueb.gr mailto:afiont...@aueb.gr
wrote:
Dear Sir or Madam,
I am writing to ask a few questions about KIM platform. In the
context
.
all the best
Philip Alexiev
Software Engineer, KIM team
On 27 Jun 2012, at 2:57 PM, Reneta Popova wrote:
Begin forwarded message:
From: Aditya Pathak pathak.adi...@hotmail.com
Subject: Large_KB_gazatteer
Date: 27 юни 2012 14:55:36 Гриинуич+0300
To: reneta.pop...@ontotext.com
Hi
Hello Naaman,
I think you will find the documentation on this page useful:
http://www.ontotext.com/kim/getting-started/documentation
and more particularly - the Customizing KIM Guide .
Hope this helps,
Philip
On 8 Jun 2012, at 8:58 AM, Naaman Musawwir wrote:
Hello there,
I have to add
Hello Minh Hoang,
Semantic annotations in documents serve only to link specific parts of the
texts to some instances in the semantic repository. The phrase is just
identified as a specific instance from the knowledge base. Once you have the id
of the object (the URI), you can query the
.nabble.com/Malformed-query-result-from-server-td3451630.html
Hope this helps,
Philip Alexiev
Software Engineer, KIM team
On 26 Apr 2012, at 1:42 AM, Jerry Gao wrote:
Hi, ontotext team:
I am currently evaluating KIM Platform. The version of KIM given by your team
is kim-platform-3.0-RC5-Windows
are trying to cast it to) . My guess is they are different.
Hope this helps.
Philip Alexiev
Software Engineer, KIM team
On 13 Apr 2012, at 9:47 AM, Minh Hoang wrote:
hi all,
i want to create KIMDocument from an URl (example :
file:///C:/KIM/corpus/Wayne_Rooney.htm), but in webservice API
Begin forwarded message:
From: Philip Alexiev philip.alex...@sirma.bg
Subject: Re: KIM installation issue
Date: 12 April 2012 7:20:28 PM GMT+03:00
To: yves HT y...@hightrack.co.uk
Cc: KIM discussion kim-discussion@ontotext.com
Hello Yves Dassas,
It looks like the cause
,
Philip Alexiev
Software Engineer, KIM team
On 8 Apr 2012, at 1:11 PM, Minh Hoang wrote:
hi Philip,
i'm try to test kim webservice API to build my client application, i has
followed kim KimDocs-3.0-EN, but description of function is not fully. i
can't understand input and out put of method
Hello Fabian,
The LKB gazetteer uses its own tokenization, which is generally - whitespace
based. This is the reason why it won't work over asian texts.
Unfortunately we no longer support it.
All the best,
Philip
On 4 Apr 2012, at 10:59 AM, Fabian Cretton wrote:
Dear all,
I am using
gazetteer I could use for large
chinese gazetteer ?
Or, coulc I be able to modify the large KB gazetteer to make it work with
chinese ?
Thanks a lot, any information is welcome as I don't see any other workaround
so far and it is quiet a problem for me
Fabian
Philip Alexiev philip.alex
gazetteer works very well with 200'000
aliases (wordnet).
But now, I will need much more.
Is it stupid to try the large KB Gazetteer with 10'000'000 aliases (10
millions) or even 30 millions aliases ? should I right away look for another
option ?
Thanks
Fabian
Philip Alexiev
___
Kim-discussion mailing list
Kim-discussion@ontotext.com
http://ontomail.semdata.org/cgi-bin/mailman/listinfo/kim-discussion
Hope this helps,
Philip Alexiev
Software Engineer, KIM team
___
Kim-discussion mailing
}
This is actually the process we use when implementing a new scenario. These
tools will give you insight of what is actually going on under the hood.
Hope this helps.
Philip Alexiev
Software Engineer , KIM team
On 22 Mar 2012, at 5:55 AM, Minh Hoang wrote:
here is my config:
+ my euro ontology
in the whitelist.
Hope this makes the horizon a little clearer.
Please feel free to ask for more clarification.
Happy holidays.
Philip Alexiev
Software Engineer, KIM team
On 30 Dec 2011, at 2:11 PM, Cong Nguyen wrote:
Hi everyone.
I follow KimDocs-3.0-EN/CaseStudy-IntegrationDbPedia.html
Hi Kele,
Thank you for your interest in KIM.
The easiest way to start is with the Quick Start Guide from the documentation.
I will provide the direct link for convenience: Quick Start Guide .
All the best,
Philip Alexiev
Software Engineer, KIM team
On 8 Nov 2011, at 4:10 PM, Kele Belloze
date de : Lun 24.10.11, Philip Alexiev philip.alex...@sirma.bg a
écrit :
De: Philip Alexiev philip.alex...@sirma.bg
Objet: Re: [Interested-in-kim] Help
À: interested-in-...@ontotext.com
Cc: kalthoum_...@yahoo.fr
Date: Lundi 24 octobre 2011, 15h47
Hello Kalthoum,
KIM is not compatible
for your interest in KIM,
Philip Alexiev
Software Engineer, KIM team
On 14 Oct 2011, at 5:15 PM, Ruben Costa wrote:
Hello all,
I’m facing some problems in running KIM on a Windows 7 x64 OS.
I’m getting the following error message:
Exception in thread ComponentStarter-Thread-2
ok. Not working
with the latest JDK version (JDK 1.7.0)
Thank you once again.
Best regards,
From: Philip Alexiev [mailto:philip.alex...@ontotext.com]
Sent: sexta-feira, 14 de Outubro de 2011 15:58
To: Ruben Costa
Cc: Kim-discussion@ontotext.com
Subject: Re: [Kim-discussion] Unable
the best,
Philip Alexiev
On 10 Oct 2011, at 12:13 PM, Jamie Forth wrote:
On Mon, 2011-10-10 at 10:32 +0300, Philip Alexiev wrote:
In KIM release 3.0-RC4 the way to communicate with the semantic
repository is through the API or using the exposed MBeans.
Thanks for the clarification.
Forest
the best,
Philip Alexiev
On 10 Oct 2011, at 12:13 PM, Jamie Forth wrote:
On Mon, 2011-10-10 at 10:32 +0300, Philip Alexiev wrote:
In KIM release 3.0-RC4 the way to communicate with the semantic
repository is through the API or using the exposed MBeans.
Thanks for the clarification.
Forest
Begin forwarded message:
From: Philip Alexiev philip.alex...@sirma.bg
Subject: Re: [Kim-discussion] Help - Adding to document repository, importing
new instances got from annotations into KB using Java API.
Date: 6 October 2011 12:26:11 PM GMT+03:00
To: Hoàng Công Nguyễn congnh0
the index)
public boolean synchronizeIndex(@PName(force) boolean force) throws
DocumentRepositoryException;
All the best.
Philip
On 6 Oct 2011, at 12:29 PM, Philip Alexiev wrote:
Begin forwarded message:
From: Philip Alexiev philip.alex...@sirma.bg
Subject: Re: [Kim-discussion
/forum/mvnforum/viewthread?thread=86
When I changed the encoding to standard UTF-8 without BOM it loaded OK.
All the best,
Philip
On 5-10-2011 7:03 AM, Tran Ngoc Duc wrote:
Hi Philip Alexiev,
The attached file is in the UFT-8 (with BOM) format. I have tried to
change Astract class label
Hi Tran Ngoc Duc,
Loading an ontology in UTF-8 should not be a problem.
Can you provide the file that causes the problem.
Thank you,
Philip Alexiev
Software Engineer, KIM team
Hi,
I'm newbie with KIM. I save PROTON ontology file with UTF-8 format then
start KIM server but it doesn't load
nerc.properties and add Topic to
com.ontotext.kim.KIMConstants.IE_ANN_TYPES list, but nothing changed.
Do I have to change something else?
Best,
Srecko
On Thu, Jul 14, 2011 at 12:26 PM, Philip Alexiev @ Ontotext
philip.alex...@ontotext.com wrote:
Hi Srecko,
You can run the gate
On Thu, Jul 14, 2011 at 1:15 PM, Philip Alexiev @ Ontotext
philip.alex...@ontotext.com wrote:
The process is described in the customization guide you mentioned.
You have added this RDF to the semantic repository. This means that now
the gazetteer will be able to match the instances
Hi Jeremy,
It is best if you provide a simple standalone class or a test case that works
with with some test data and will reproduce the problem. That way we can track
exactly what is happening.
Thank you,
Philip
On 8 Jul 2011, at 6:08 PM, Jeremy Raes wrote:
Hey,
I am building an
Begin forwarded message:
From: Philip Alexiev @ Ontotext philip.alex...@ontotext.com
Date: 4 July 2011 9:01:10 AM GMT+03:00
To: Ben Fino-Radin bfinora...@gmail.com
Cc: kim-i...@ontotext.com
Subject: Re: Install Ontologies?
Hi Ben,
http://www.ontotext.com/sites/default/files
Hi Srecko,
The best way to check what will be filled in the gazetteer dictionary is to run
the KIM server and use JVisualVM to execute the gazetteer query against it.
If you give more context, I can provide some more concrete guidelines. What is
the ontology you are using. What are the
:
Data not available because JMX connection to the JMX agent could not be
established.
Maybe I should do something to enable this JMX agent?
Best,
Srecko
-Original Message-
From: Philip Alexiev @ Ontotext [mailto:philip.alex...@gmail.com]
Sent: Tuesday, June 28, 2011 12:32
-9a37-71a675dcd2eb
.
and many others... Could you please tell me what to do next?
Best,
Srecko
On Wed, Jun 22, 2011 at 5:01 PM, Philip Alexiev @ Ontotext
philip.alex...@gmail.com wrote:
Hello Srecko,
The steps are described in this guide:
http://www.ontotext.com/sites/default/files
?
This could be funny question, but I am not sure what to do.
Best,
Srecko
From: Srecko Joksimovic [mailto:sreckojoksimo...@gmail.com]
Sent: Wednesday, June 22, 2011 5:47 PM
To: 'Philip Alexiev @ Ontotext'
Cc: 'kim-discussion@ontotext.com'
Subject: RE: [Kim-discussion] Extend proton
whitelist.
best
philip
On 22 Jun 2011, at 9:54 PM, Srecko Joksimovic wrote:
Thank you Philip. I know something about GATE, but I have to learn more.
Ok, this means that I have step 2. to solve...
Best,
Srecko
From: Philip Alexiev @ Ontotext [mailto:philip.alex...@ontotext.com]
Sent
Hi Ha
On the bottom of the official page of the KIM project, you will find links to
the documentation. Most particularly, you can download and examine the system
documentation, where you will find descriptions and examples how to interact
with the server using RMI and web services.
hth
philip
currently available there.
Hope this helps.
Philip Alexiev
Software Engineer, KIM team
On 20 Jun 2011, at 10:26 AM, Ha Pham wrote:
Hi All,
I'm evaluating KIM and the only version I can download is 3.0RC4. Once
downloaded and extracted, I run into a couple of issues:
- the doc/html
#type
http://dbpedia.org/ontology/Philosopher .
to dbpedia_kim.nt solved the empty result set problem.
Kind regards,
Jeremy
On 16 May 2011 10:27, Philip Alexiev @ Ontotext philip.alex...@ontotext.com
wrote:
Hello Jeremy,
You can think of KIM as a big extension to GATE. The real
Hi Dragan,
The form has been fixed.
Thank you for your patience and we are sorry for the inconvenience.
All the best,
Philip Alexiev
Software Engineer, KIM Platform
On 2 May 2011, at 2:57 PM, Dragan Djuric wrote:
Hi,
It seems that the KIM download page is broken. After filling
the text (having removed or replaced all
URI special characters).
Hope this helps
If not - please be a little more specific and we will try to help
Philip Alexiev
Software Engineer, KIM Platform
On 29 Mar 2011, at 1:31 PM, Сергей Васяйчев wrote:
Hello!
Does KIM (or Ontotext) platform provide
it is richer than just the knowledge base alone.
Hope this helps,
Philip Alexiev
Software Engineer, KIM team
On 25 Mar 2011, at 3:00 PM, Jingyu Wu wrote:
Hello,
i want to use the KIM knowledge base to build an ontology database, when i
downloaded KIM platform, i've only found a wkb.nt file
,
Philip Alexiev
Software Engineer, KIM Platform
On 21 Mar 2011, at 4:29 AM, Stefi Ghiran wrote:
Hi,
I'm new to KIM.
I tried the steps from
http://ontotext.com/kim/doc/KimDocs-3.0-EN/CaseStudy-IntegrationDbPedia.html.
At step 3.6 Setting up the gazetteers I have some problems, and I've tried
to the semantic repository
and all the documents you have populated. When you start KIM again, it will
generate the indexes based on the rdf files described in the imports section in
KIM/config/owlim.ttl .
Hth
Philip Alexiev
Software Engineer, KIM platform
On 28 Feb 2011, at 3:46 AM, leen hashim
Hi Naaman,
Basically, KIM is strong in analyzing news and small documents. That is because
some analyzing resources can't handle big amounts of data. For example the
patterns in the Jape rules, may perform greedy matches, which are very heavy
over large content.
The maximum size is not an
Hi Leen
Could you provide the whole log. There is probably a problem somewhere
preventing KIM from starting. The log will point us to this problem.
Thank you,
Philip
On 25 Feb 2011, at 4:14 AM, leen hashim wrote:
hi
..i've a problem in starting KIM server
yesterday it works really
this helps.
Philip
On Jan 3, 2011, at 5:37 PM, Naaman Musawwir wrote:
Yes, that tool will be a lot helpful and is in fact, needed. Will wait for
the information on that.
Regards,
Naaman Musawwir.
From: Philip Alexiev @ Ontotext [mailto:philip.alex...@ontotext.com]
Sent: Monday, January 03
Hi Naaman,
We had such issues with abnormal termination of KIM before. This is in cases
when the machine stops or the process is killed with a KILL signal. Just for
information, by default, killall will send a TERM signal , which will cause KIM
to stop normally.
There is a tool to recover a
it to work for the second server. Please check why it is
happening.
Also, I sent a question about adding a custom feature into documents and also
sent properties file. Did you get time to have a look at that?
Regards,
Naaman Musawwir.
From: Philip Alexiev @ Ontotext [mailto:philip.alex
: Monday, November 29, 2010 7:32 AM
To: 'Philip Alexiev@'
Cc: WILSON, Greg; borislav popov; Matthew Petrillo; mailing-list mailing-list
Subject: RE: Issues with creating owl files
Philip,
Attached is a Word document showing what happens when Kim is run using the
attached LMI.owl file build
/KimDocs-3.0-EN/ExtendInformationExtraction.html
Hope this helps,
Philip Alexiev
Software Engineer, KIM Team
___
Kim-discussion mailing list
Kim-discussion@ontotext.com
http://ontotext.com/mailman/listinfo/kim-discussion
Hi Naaman,
We managed to reproduce the issue and are currently working on it. We will
provide you a link to download the fixed version. The fix will definitely go
into KIM 3.5, which is expected soon.
Greetings
Philip Alexiev
Software Engineer, KIM Team
On Nov 25, 2010, at 4:46 PM, Philip
guide about the first one.
Regards,
Naaman Musawwir.
From: Philip Alexiev @ Ontotext [mailto:philip.alex...@ontotext.com]
Sent: Friday, November 26, 2010 2:19 PM
To: Naaman Musawwir
Cc: mailing-list mailing-list
Subject: Re: [Kim-discussion] Help - Adding/Deleting Documents
Hi Naaman
-3.0-EN/Examples.html
hth
Philip
On Nov 26, 2010, at 2:58 PM, Philip Alexiev @ Ontotext wrote:
Hello Naaman,
My guess is that this and the previous are connected. So we will look into
this interesting behavior too. Thank you for the feedback.
Philip
On Nov 26, 2010, at 11:58 AM
/index.html)
About the semi-supervised learning - we haven't had such a use case, but we
have the infrastructure to support it.
Hope this helps
Philip Alexiev
Software Engineer, KIM team
Original Message
Subject: Help requested
Date: Thu, 11 Nov 2010 08:43:54 -0800 (PST
this available in the public repo or also mention in the
documentation that one has to deploy it manually.
Best regards,
Philip
Am 12.11.2010 15:54, schrieb Philip Alexiev @ Ontotext:
Hi Philip,
This is the case. platform-api is needed by kim-api, only for a part that
is still experimental
Hi Yvonne,
In order to use a new ontology it is good to map it to your top ontology
classes.
http://ontotext.com/kim/doc/KimDocs-3.0-EN/ExtendInformationExtraction.html
This is a good guide showing how you can do this.
tht
Philip Alexiev
Software Engineer, KIM team
On Nov 8, 2010, at 10
be to track the jars from lib/ in the public maven
repository (http://mvnrepository.com/) . The ones you can't find are most
probably developed by us . You can add them manually as artifacts to your
internal maven repository.
hth,
Philip Alexiev
Software Engineer, KIM team
On Nov 8, 2010
Hi Srecko
The class is part of channel_iface_impl_stub-1.0.jar. Make sure you have it in
the java classpath of your client.
All the best,
philip
Mr Borislav,
I saw your documentation, and I find it very helpful. Unfortunately, I
still have a problem. Maybe this is not a question for
Helo Fangkai
You can inspect your populater configuration file -
$KIM_HOME/config/populater.xml . The option INPUT_DOC_EXT holds a list
of extensions KIM supports. Add pdf there and PDFs will be annotated.
We have changed it to be the default in KIM 3.0 .
Greetings,
Philip
On 06/23/2010
On Tue, Jun 22, 2010 at 10:03 AM, Philip Alexiev
philip.alex...@sirma.bg wrote:
Hello Yang,
You will find the answers inline the document.
On 06/22/2010 04:27 PM, Yang Fangkai wrote:
Hello, Philip,
Please find the attached file. In this file, there are
three
Hello Juha,
I have looked at the logs, and everything seems to be OK. It looks to me
like a browser/tomcat issue.
Please try the actions below:
* try to open not localhost:8080 but http://localhost:8080/KIM/ (you
should have deployed KIM.war to $TOMCAT/webapps/ by now)
* if this does not
Hello Juha,
Please follow the actions in my previous mail. It is safe to delete all
the contents of both $TOMCAT/temp/ and $TOMCAT/work/ folders. You can
even delete $TOMCAT/webapps/KIM/ as well and tomcat will unpack it from
the web archive again.
Actually running tomcat from within KIM
, how can I do that?
If you know anything about this, I would really appreciate the help.
Thanks again.
Nikhil
2009/10/16 Philip Alexiev philip.alex...@ontotext.com
mailto:philip.alex...@ontotext.com
Hello Nik,
I will try to be as helpful as possible.
Our public documentation
Hello,
The reason for this behavior is the way Appelt mode works. This is a
quote from the GATE Jape documentation about appelt mode:
From all the rules that match a region of the document starting at some
point X, the one which matches the longest region is fired.
Maybe you should use
Hi Enzo,
Your english is perfect!
First of all, there is a big chance, that the name in the text is
recognized as a Person. Several different approaches are used for this
purpose. First, there may be an exact match of course with a known
person from the KB (Knowledge Base). Several other
Hi Valentina,
Thank you for your big interest in KIM.
You can find the information you need in this post -
http://www.mail-archive.com/kim-discussion@ontotext.com/msg00476.html .
Good luck,
Philip
Valentina De Vivo wrote:
Hi All,
in my recent studies I learned that KIM annotates in the
of URIImpl.RDFS_LABEL?
Thanks,
Anton
2009/3/31 Philip Alexiev philip.alex...@sirma.bg
mailto:philip.alex...@sirma.bg
Hi Anton,
The answers to these questions are very easy to find in the
documentation. I recommend you get familiar with KIM and Sesame
documentation. They can
Hi Anton,
The answers to these questions are very easy to find in the
documentation. I recommend you get familiar with KIM and Sesame
documentation. They can be found at these locations:
KIM documentation: http://www.ontotext.com/kim/doc/sys-doc
Sesame documentation:
want to create annotation for paradol but not for He and mg
(b/c he has a diffrenent meanign as this He ). Please guide me how can
I do this .
I am using Kimplatform-2.3-RC1
Thanks
Mehnaz
2009/3/25 Philip Alexiev philip.alex...@sirma.bg
mailto:philip.alex...@sirma.bg
Hi Mehnaz
Hi Mehnaz,
Please provide more context to help us understand the problem.
- what is the text you are running the extraction on
- what pipeline you are executing
- what version of KIM you are using
Any additional information will be useful.
Greetings,
Philip
Mehnaz Adnan wrote:
Hi
I want
Hi Ahmed,
The answers to your questions are inline your e-mail:
Ahmed Yousry wrote:
Hello Philip,
I have some questions, and I want your help please.
First, I use windows XP and KIM version 2.3-CR1
Mainly, my concern is in code and APIs, not in KIM web interface.
1- I want to
Hi Valentina,
I am very glad to hear you are happy :)
The answer to your question very much depends on what you mean by
semi-structured text. The easiest and most accurate way to achieve your
goal is to use well structured xml files. Upon load, GATE parses those
documents and creates
Hi Kaspar,
Thank you for the information.
It seems KIM does not catch whole names. The reason is most probably in
the jape rules. We will take a look and provide a more detailed answer.
Greetings,
Philip
Kaspar Fischer wrote:
Dear list,
I have just installed kim-platform-2.3-RC1 and
Hi Kaspar,
I have added a JAPE rule to catch this case. The two files attached
contain the main jape file main.jape which is only changed to include
the new jape, and the new jape itself called long_name.jape . You are
correct that the Fischer detected by the gazetteer is not the right
Hi Valentina,
The namespaces in your sesame.inmem.conf file are not the right number.
They should equal the number of imports. This may be the problem. I have
a attached a copy of the file which should work.
Greetings,
Philip
Valentina De Vivo wrote:
Hi all,
Now the output of startKIM.bat
Hi Valentina,
The file song2009.owl in the attachments of your mail is not a valid
XML. See if fixing it will solve the problem.
Greetings,
Philip
Valentina De Vivo wrote:
Hi,
I missing three steps to finish my studies about KIM, so please help me! ;-)
The following is the first.
I'm
Hi Valentina,
The error shows that Sesame fails to create the repository. My guess is
that the problem is in you sesame.inmem.conf file.
Try using a fresh working copy of KIM and apply your changes over it.
Greetings,
Philip
Valentina De Vivo wrote:
Sorry,
this is the error output.
Hi Valentina,
Thank you for your interest in KIM. We will be happy to help.
The easiest way to observe the semantic annotation results is through
the graphical interface of KIM. Just find the file and show all of its
annotations. If you really don't want to use it, then there are
Hi Mehnaz,
In order to be able to reproduce the issue, we should have some more
information.
1. What version of KIM you are using.
2. Your visibility.nt file
3. Your sesame.inmem.conf
This should be sufficient to resolve the problem.
Best Wishes,
Philip
Mehnaz Adnan wrote:
Hi
I tried
Layan wrote:
Hi
thanx alot
but still, i have the problem but with connection to server.
this message appear after I load the plug-in:
An error occurred during initial connection to server
the port number 80 (as default), and also to IP address.
Regards,
Layan
Hi Layan
We have identified the problem and we are working on resolving it.
You will receive a notification as a solution is ready.
Regards,
Philip and Ontotext Team
Layan *εїз wrote:
Hi
thanx alot
but still, i have the problem but with connection to server.
this message appear after I
is
the right place of the lucene's repository?
you can show me how I must do the right install of lucene?
2008/12/8 Philip Alexiev [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
___
NOTE: Please REPLY TO ALL to ensure that your reply reaches all members
. If is it Windows do you start KIM from C:/ or another folder
with space in the name like Program Files ?
3. Could you please also send us the versions version of Java you
use ?
Regards ,
Kaloian
Sante Barbuto wrote:
2008/12/2 Philip Alexiev [EMAIL PROTECTED
Silvia Karagova wrote:
Hi,
I am forwarding your question to the kim-discussion mailing list where
you can ask KIM developer team and users.
Best,
Silvia
- Original Message -
*From:* Layan *εїз mailto:[EMAIL PROTECTED]
*To:* [EMAIL PROTECTED] mailto:[EMAIL
Hi Sante,
Could you send the application configuration file you use. Its name is
specified in kim/config/nerc.properties:
com.ontotext.kim.KIMConstants.IE_APP=IE.gapp
Provide the gapp file so that we can look for the problem there.
Thanks,
Philip
. If you find a particular step of the process difficult,
please provide some more details and we will do our best to help you.
Greetings,
Philip Alexiev
___
NOTE: Please REPLY TO ALL to ensure that your reply reaches all members of this
mailing list
repository you use (either Lucene or
Oracle). They are not directly accessible in the file system as human
readable files. The corpus is used only for population, it is no longer
needed afterwards.
Hope this helps.
Best wishes,
Philip Alexiev
KIM Developer
steven shingler wrote:
Hi all,
Has anyone got a script to run KIM on startup out of /etc/init.d/ ?
Thanks in advance,
Steven
___
NOTE: Please REPLY TO ALL to ensure that your reply reaches all members of
this mailing list.
KIM-discussion
98 matches
Mail list logo