HI!
Recorded DVB-C mpeg files seem to be somehow corrupted or illegal. I can
watch them perfectly with mplayer and MythTV, but skipping/jumping
through them causes problems.
MythTV (using ffmpeg) reports most of the time things like this, but the
picture is visually OK:
[mpeg2video @
On Monday 14 August 2006 09:30, Thomas Börkel wrote:
Using mplayer (libmpeg2) causes pixelization for a short moment after
the skip, but it does not report errors. When I switch MythTV from
ffmpeg to libmpeg2, it behaves the same (no error messages, but
pixelization).
Is this normal? As I
HI!
Thanks for your fast reply.
Jukka Tastula wrote:
Using mplayer (libmpeg2) causes pixelization for a short moment after
the skip, but it does not report errors. When I switch MythTV from
ffmpeg to libmpeg2, it behaves the same (no error messages, but
pixelization).
This is a libmpeg2
Dave Oxley [EMAIL PROTECTED] writes:
A few weeks ago Austar changed something and everything stopped
working. I started getting this from MythTV
The Nova CI is a card with a low level CA API. A lot of processing is
done by MythTV to handle the CAM.
May be you should try vdr, so you could have
Hello Philipp,
I trimmed LKML from the CC list.
on 14.08.2006 11:37 Philipp Matthias Hahn said the following:
Starting kdetv by accident on my Siemens DVB-C 1.x produced the
following OOPS, because kdetv did open /dev/vbi0. The OOPS is
100% reproduceable.
libzvbi:capture_v4l2k_new:
Unfortunately I dont know much about the LNB. I went and remove it from the
dish but the identification sticker has worn away. It came from a common 18
inch DirecTV dish. there are two LNB's in there, I think, because there are
two coax outs. I'm only using one at the moment because I
Hi Hartmut!
Am Sonntag 13 August 2006 21:32 schrieb Hartmut Hackmann:
HI. Jan
Jan Tönjes wrote:
[...]
The point is this message:
Aug 8 11:53:18 alitoh tuner 0-004b: type set to tda8290+75a
The driver expects another tuner. Looks like we have another case of
hardware changes without
I would REALLY apprecate any help or insght you might have on this.
thank you very much for your consideration.
What oscillator values does your LNB use?
The last time I tried to use dvbtune in the US I had to change the
hard coded defines from 9.750 / 10.6 GHz to match my US specific
Dave Schile wrote:
I just tried using the modules from the kernel source 2.6.17.8 (that
is the latest stable kernel as of this writing) the dst module
couldn't even find the device.
Yes; I sometimes experience that exact problem as well, which in my case
can be fixed by a reboot (sorry,
Well, I tried different compiles and saw nothing different. I found that
this LNB uses an oscillator running at 11.25 GHz. So I put these lines in
the dvb_defaults.h file for dvbtune:
/* DVB-S */
// With a diseqc system you may need different values per LNB. I hope
// no-one ever asks for
// With a diseqc system you may need different values per LNB. I hope
// no-one ever asks for that :-)
#define SLOF (11700*1000UL)
#define LOF1 (11250*1000UL)
#define LOF2 (11250*1000UL)
is that right?
Yes.
Still, the unit seems not to tune at all. I keep thinking I'm missing
Em Seg, 2006-08-14 às 14:03 -0700, Greg KH escreveu:
On Sun, Aug 13, 2006 at 05:50:34AM +, Mike Galbraith wrote:
On Sat, 2006-08-12 at 18:02 -0700, Andrew Morton wrote:
I'd assume that you have CONFIG_PCI_MULTITHREAD_PROBE set, and
Yes.
Mauro, this is odd. Anything in the dvb
On Mon, Aug 14, 2006 at 08:30:46AM +0200, Thomas Börkel wrote:
HI!
Recorded DVB-C mpeg files seem to be somehow corrupted or illegal. I can
watch them perfectly with mplayer and MythTV, but skipping/jumping
through them causes problems.
MythTV (using ffmpeg) reports most of the time
HI!
Joachim Steiger wrote:
if you are willing to track this down you can contact me directly.
Thanks, I'll contact you off-list.
Thomas
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi folks,
I have a weird problem with my remote control. It only works if I either play
a channel before (e.g. mplayer dvb://...) or if I remove all the cx88 modules
and install cx88-dvb again.
I had a look at this using the parameter ir_debug=1 with cx88xx, so I am
pretty sure that this is
15 matches
Mail list logo
