hello,
Michael Hunold wrote:
Hello Philipp,
I trimmed LKML from the CC list.
on 14.08.2006 11:37 Philipp Matthias Hahn said the following:
Starting kdetv by accident on my Siemens DVB-C 1.x produced the
following OOPS, because kdetv did open /dev/vbi0. The OOPS is
100% reproduceable.
this
Hallo,
is there a plan to port the DVB Driver to OpenSolaris?
Regards
Herbert
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi,
If I try to scan some transponders with the initial file [1] and the
scan utility from dvb-apps [2], the autosearch works for the configuration
2/3 NONE QAM64 8k 1/32 NONE but not for the configuration
3/4 NONE QAM64 8k 1/8 NONE.
It seems dib3000mc_autosearch_is_irq return 1 (failed),
matthieu castet wrote:
Hi,
If I try to scan some transponders with the initial file [1] and the
scan utility from dvb-apps [2], the autosearch works for the configuration
2/3 NONE QAM64 8k 1/32 NONE but not for the configuration
3/4 NONE QAM64 8k 1/8 NONE.
It seems
I'm noticing that the KWORLD DVB-T 220 with the
TDA10046H tuner is very slow to tune 2 to 5 seconds.
Cards like the AverMedia 771 tune in less then a second.
Is this a problem with the driver or the chip?
Barry
___
linux-dvb mailing list
Hi everybody !
I have a pinnacle PCTV usb stick, it just works.
The only problem is with the remote control, indeed all keys are not
recognized by xev, and number key such as 1, 2 etc are recognized as é
, because I use a french layout for my keyboard. So I just want to know
how to add IR
Hello.
# DVB-T Sevilla (Andalucia) by x2 15 Agosto 2006
# T freq bw fec_hi fec_lo mod transm-mode guard-interval hierarchy
T 76200 8MHz 2/3 NONE QAM64 8k 1/4 NONE # C57
T 79400 8MHz 2/3 NONE QAM64 8k 1/4 NONE # C61
T 83400 8MHz 2/3
Good bye to all I erase of the list.
El mar, 15-08-2006 a las 15:14 +0200, x2 escribió:
Hello.
# DVB-T Sevilla (Andalucia) by x2 15 Agosto 2006
# T freq bw fec_hi fec_lo mod transm-mode guard-interval hierarchy
T 76200 8MHz 2/3 NONE QAM64 8k 1/4 NONE
Hello!
Can anybody show me where I can read some RTFM about Twinhan 1025 DVB card?
My problem for this moment is than the /dev/dvb/adapter0/frontend0 didn't
created.
Sysinfo: Ububntu 6.06, kernel 2.6.15, can post additional info if required.
--
Best Regards,
Nick Fedchik
Nick Fedchik wrote:
Hello!
Can anybody show me where I can read some RTFM about Twinhan 1025 DVB card?
My problem for this moment is than the /dev/dvb/adapter0/frontend0 didn't
created.
Sysinfo: Ububntu 6.06, kernel 2.6.15, can post additional info if required.
2.6.15 is too old. Use
Dave Schile wrote:
Well, I tried different compiles and saw nothing different. I found
that this LNB uses an oscillator running at 11.25 GHz. So I put these
lines in the dvb_defaults.h file for dvbtune:
/* DVB-S */
// With a diseqc system you may need different values per LNB. I hope
Dave Schile wrote:
I just tried using the modules from the kernel source 2.6.17.8 (that is
the latest stable kernel as of this writing) the dst module couldn't
even find the device. Here is dmesg after 'modprobe dst verbose=4'
I think the latest changes is not yet in mainline kernel. Use
Dave Schile wrote:
I just used hg to download the latest v4l-dvb and dvb-apps from
Mercurial and everything compiled and installed fine. The drivers all
modprobe fine. I modpobe in this order:
dvb-core
bttv
dvb-bt8xx
dst
Is there anything I'm missing there?
dmesg says:
Zoilo Gomez wrote:
I decided to do some tests using kernel 2.6.13.3, with following results:
1) locking problems occur using dvbscan -v (nut also (vlc -v) in the
following situations:
= 2.6.13.3 kernel with downloaded snapshot 20051202: locks fine,
dvb-scan returns 0x1f and dumps PMT
My problem for this moment is than the /dev/dvb/adapter0/frontend0
didn't
created.
Sysinfo: Ububntu 6.06, kernel 2.6.15, can post additional info if
required.
2.6.15 is too old. Use the latest Hg tree.. http://www.linuxtv.org/repo/
Are You sure than that tree has a Twinhan 1025 support?
[EMAIL PROTECTED] wrote:
Hi All!
Trying for more than one year to get my Twinhan CAM module (IRDETO) to work
with without success I have now decided to give it a try myself...
However I have inspected the code parts around Twinhan-CI and DVB / DVB-APPS
CI code and I am now unsure
Nick Fedchik wrote:
My problem for this moment is than the /dev/dvb/adapter0/frontend0
didn't
created.
Sysinfo: Ububntu 6.06, kernel 2.6.15, can post additional info if
required.
2.6.15 is too old. Use the latest Hg tree.. http://www.linuxtv.org/repo/
Are You sure than that tree has a
On Tue, Aug 15, 2006 at 08:43:20AM +, Birgit Halegmaier wrote:
is there a plan to port the DVB Driver to OpenSolaris?
a) not that i know of
b) there afaik are massive licence issues since the linux dvb drivers
are gpl and opensolaris isn't (its CDDL).
also see
Are You sure than that tree has a Twinhan 1025 support?
( http://www.twinhan.com/product_satellite_3.asp )
Well I will try that one...
Yep, the VP-1025/VP-1032 are the only devices that come with a Fujitsu
MB86A15 Silicon tuner
I seen that MB86A15 on a card. But how can it help me to set up
Hello thomas,
please forgive me, this is a webmail client.
thomas schorpp writes:
Michael Hunold wrote:
this is a known issue with the analogtuner part of siemens dvb-c, ive
stated that in my mail with my patch, the tuner code is buggy and may oops
with tvtime or kdetv, cause of their
Are You sure than that tree has a Twinhan 1025 support?
( http://www.twinhan.com/product_satellite_3.asp )
Well I will try that one...
Yep, the VP-1025/VP-1032 are the only devices that come with a Fujitsu
MB86A15 Silicon tuner
I seen that MB86A15 on a card. But how can it help me to set
Dave Schile wrote:
Are You sure than that tree has a Twinhan 1025 support?
( http://www.twinhan.com/product_satellite_3.asp )
Well I will try that one...
Yep, the VP-1025/VP-1032 are the only devices that come with a Fujitsu
MB86A15 Silicon tuner
I seen that MB86A15 on a card. But how
Nick Fedchik wrote:
Are You sure than that tree has a Twinhan 1025 support?
( http://www.twinhan.com/product_satellite_3.asp )
Well I will try that one...
Yep, the VP-1025/VP-1032 are the only devices that come with a Fujitsu
MB86A15 Silicon tuner
I seen that MB86A15 on a card. But how can
I seen that MB86A15 on a card. But how can it help me to set up
/dev/dvb/adapter0/frontend0 ?
What the module should I insert?
PS: Sorry, I see than my questions looks dummy, but just I newby in
DVB/V4L
Nick: I have the same card and I'm stumbling through getting it to
work. With the
From: Manu Abraham [EMAIL PROTECTED]
To: Dave Schile [EMAIL PROTECTED]
CC: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Please see if you can help: Twinhan VP 1025 DVB-S
PCI Card
Date: Tue, 15 Aug 2006 17:48:00 +0400
MIME-Version: 1.0
Received: from py-out-1112.google.com
Dave Schile
From: Nick Fedchik [EMAIL PROTECTED]
To: Manu Abraham [EMAIL PROTECTED]
CC: Dave Schile [EMAIL PROTECTED], linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Twinhan 1025 (/dev/dvb/adapter0/frontend0)
Date: Tue, 15 Aug 2006 19:11:10 +0300 (EEST)
MIME-Version: 1.0
Received: from
On juli 20th there was some conversation going on about the Twinhan
Sat-CI 1034 v1.2 card.
The conversation was about that there is not yet support for this card
in linux dvb but Manu Abraham said it would take probably some weeks.
Is there any repository allready available with some work
Hi Manu,
Manu Abraham wrote:
Zoilo Gomez wrote:
I decided to do some tests using kernel 2.6.13.3, with following results:
1) locking problems occur using dvbscan -v (nut also (vlc -v) in the
following situations:
= 2.6.13.3 kernel with downloaded snapshot 20051202: locks fine,
dvb-scan
I suppose it could be a weak signal. I am using an inline signal meter to
aim the dish and it shows a signal. How about polarization? It turns out
this LNB is Circular only (thank you Steven Toth). How do I get dvbtune or
other szap to use circular (L or R) polarity? Is this
Dave Schile wrote:
I suppose it could be a weak signal. I am using an inline signal meter
to aim the dish and it shows a signal. How about polarization? It
turns out this LNB is Circular only (thank you Steven Toth). How do I
get dvbtune or other szap to use circular (L or R) polarity?
I don't fully understand the real electrical/RF implications of circular
left/right vs linear horizontal/vertical other than to say that it's
related to how the signal is sent (polarised) from the satellite (it's
polarisation) and that you have to have a matching LNB of the same
Michel Verbraak wrote:
On juli 20th there was some conversation going on about the Twinhan
Sat-CI 1034 v1.2 card.
The conversation was about that there is not yet support for this card
in linux dvb but Manu Abraham said it would take probably some weeks.
Is there any repository allready
Thanks for the answer. Looking forward for the first examples.
Regards,
Michel.
Manu Abraham schreef:
Michel Verbraak wrote:
On juli 20th there was some conversation going on about the Twinhan
Sat-CI 1034 v1.2 card.
The conversation was about that there is not yet support for
Since the most recent build of the v4l-dvb modules I have not been able to
rmmod dst without the -f (force) option. dst is removed with -f, but then I
am completely unable to rmmod dvb-bt8xx, even with -f. It returns:
ERROR: Removing 'dvb_bt8xx': Device or resource busy
but 'lsmod | grep
Zoilo Gomez wrote:
Hi Manu,
Manu Abraham wrote:
Zoilo Gomez wrote:
I decided to do some tests using kernel 2.6.13.3, with following
results:
1) locking problems occur using dvbscan -v (nut also (vlc -v) in the
following situations:
= 2.6.13.3 kernel with downloaded snapshot
Hi, Barry
Barry Scott wrote:
I'm noticing that the KWORLD DVB-T 220 with the
TDA10046H tuner is very slow to tune 2 to 5 seconds.
Cards like the AverMedia 771 tune in less then a second.
Is this a problem with the driver or the chip?
Barry
This is not normal, do you use a recent version of
I believe I have the same card, because the same TS204 stuff applies and
tuning is a real pain. Only some old modified drivers work. My card has
CI, but the link you gave doesn't seem to work.
What did you mean by:
In the latest v4l-dvb HEAD if you have the TS204 flag, it fixes your
problems?
Dave Schile wrote:
Since the most recent build of the v4l-dvb modules I have not been able
to rmmod dst without the -f (force) option. dst is removed with -f, but
then I am completely unable to rmmod dvb-bt8xx, even with -f. It returns:
ERROR: Removing 'dvb_bt8xx': Device or resource busy
I don't fully understand the real electrical/RF implications of circular
left/right vs linear horizontal/vertical other than to say that it's
related to how the signal is sent (polarised) from the satellite (it's
polarisation) and that you have to have a matching LNB of the same
Ok, attached my dmesg from scan -v myscanfile. scan didn't return
anything, only tuning status == 0x00. But get this, strangely scan -c
returns the channels that are on that frequency. Tried 2 frequencies. No
dmesg from scan -c though. So basically the card tunes but the driver
doesn't
Manu Abraham wrote:
Zoilo Gomez wrote:
Hi Manu,
Manu Abraham wrote:
Zoilo Gomez wrote:
I decided to do some tests using kernel 2.6.13.3, with following
results:
1) locking problems occur using dvbscan -v (nut also (vlc -v) in the
following situations:
= 2.6.13.3 kernel
Manu Abraham wrote:
Zoilo Gomez wrote:
Hi Manu,
Manu Abraham wrote:
Zoilo Gomez wrote:
I decided to do some tests using kernel 2.6.13.3, with following
results:
1) locking problems occur using dvbscan -v (nut also (vlc -v) in the
following situations:
= 2.6.13.3 kernel
Hurray, I am not the only one !
( just when I thought I was getting crazy ..)
Raido wrote:
Ok, attached my dmesg from scan -v myscanfile. scan didn't return
anything, only tuning status == 0x00. But get this, strangely
scan -c returns the channels that are on that frequency. Tried
Zoilo Gomez wrote:
Hurray, I am not the only one !
( just when I thought I was getting crazy ..)
Saw that as well.
Just try this out ..
in dst.c line 1360
!(state-dst_type == DST_TYPE_IS_CABLE)
comment out that line and see whether you are getting any further.
Manu
Got it!
Line 1360 in dst_get_tuna checks for !(state-dst_type ==
DST_TYPE_IS_CABLE); if I drop that condition the tuning problem seems fixed.
Zoilo Gomez wrote:
Manu Abraham wrote:
Zoilo Gomez wrote:
Hi Manu,
Manu Abraham wrote:
Zoilo Gomez wrote:
I decided to do some
Manu Abraham wrote:
Zoilo Gomez wrote:
Hurray, I am not the only one !
( just when I thought I was getting crazy ..)
Saw that as well.
Just try this out ..
in dst.c line 1360
!(state-dst_type == DST_TYPE_IS_CABLE)
comment out that line and see whether you are getting
Zoilo Gomez wrote:
Got it!
Line 1360 in dst_get_tuna checks for !(state-dst_type ==
DST_TYPE_IS_CABLE); if I drop that condition the tuning problem seems
fixed.
Cool.
Manu
___
linux-dvb mailing list
linux-dvb@linuxtv.org
[EMAIL PROTECTED] wrote:
Hello thomas,
please forgive me, this is a webmail client.
thomas schorpp writes:
Michael Hunold wrote:
this is a known issue with the analogtuner part of siemens dvb-c, ive
stated that in my mail with my patch, the tuner code is buggy and may
oops with tvtime or
Very cool, even my CAM works now. Took 6 months but its good now. Just
out of curiosity, any comments on this? Are our cards different from the
usual Cab-CI or are there just so few users of this card that this
didn't come up earlier? This fix going into the main tree?
Manu Abraham wrote:
Raido wrote:
Very cool, even my CAM works now. Took 6 months but its good now. Just
out of curiosity, any comments on this?
There are 2 versions of the DCT-CI. One is a FTA card and the other the
CI based card.
Somebody else wanted this change and hence it went in, but that went in
unnoticed.
With the locking problem fixed, it's time to move to the next problem
with the Twinhan Cab/CI 2031 card.
I have a Twinhan Cab/CI 2031 (well, actually I have 3 of them) and a KNC1.
Using vlc, on the KNC1, when I tell the card to start streaming a
program, it may take several seconds before it
Am Dienstag, den 15.08.2006, 21:11 +0200 schrieb Hartmut Hackmann:
Hi, Barry
Barry Scott wrote:
I'm noticing that the KWORLD DVB-T 220 with the
TDA10046H tuner is very slow to tune 2 to 5 seconds.
Cards like the AverMedia 771 tune in less then a second.
Is this a problem with the
Nico,
if you upload a sample to incoming I'll give it a look
I've uploaded a sample to
ftp.mplayerhq.hu/MPlayer/incoming/soyebhdsample.ts . The sample is
about 70MB. I'm sorry for the large file size, but the files are
enormous even for a few seconds of recording.
If I play the
53 matches
Mail list logo
