camera.
And it should be printing.
If it's not responsive - I would check the cable.
Regards,
Oleg
___________
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Elphel paper "See far with TPNET: a Tile Processor and a CNN Symbiosis" is
submitted to archive.org: https://arxiv.org/abs/1811.08032_______
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listin
simultaneously.
The lens we offer is Evetar, N125B04530WR1 with EFL=4.5mm, the focus is fixed
on infinity. http://www3.elphel.com/accessories
You can also choose your own lens (C or CS mount, or M12 mount).
Best Regards,
___
Support-list mailing list
Support
Omrani
elh.omr...@yahoo.com wrote
Dear Andrey
I'm PhD student and in my thesis is "Implementation of stereo vision system for
obstacle detection in solar boat"
this is my website:http://emorvarid.ut.ac.ir/Members.htm
Elham
On Monday, August 1, 2016 11:27 AM, support-list
su
...@yahoo.com wrote
Dear Andrey
I'm PhD student and in my thesis is "Implementation of stereo vision system for
obstacle detection in solar boat"
this is my website:http://emorvarid.ut.ac.ir/Members.htm
Elham
On Monday, August 1, 2016 11:27 AM, support-list
su
Opencv program.
Yes, this program can use color or monochrome images.
Sinserly
Elham
On Monday, August 1, 2016 9:50 AM, support-list
support-list@support.elphel.com wrote:
Dear Elpham,
There are many other issues that need to be considered when you select
configuration of the stereo
the depth of 50 meters(max).In your opinion is it
possible? And the parameters of focal length and angle of view in what range
should be?
Elham
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman
t possible for you to change some parameters such Baseline, interface or
focal length of lenses? in this case, is the price changes?
kind regards
Elham
_______
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.c
a available as a kit without the sensor?
Mitch Davister
_______
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
_______
software partner for photogrammetry
software? What software you are using with your array assemblies?
Regards,
Iakov(Yakov) Petrov.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support
Yakov,
yes - it is 323 camera, one of the latest revisions.
Andrey
On Wed, 20 Jul 2016 17:02:16 -0700 Yakovqueila...@gmail.com wrote
Here are photos of it.
___
Support-list mailing list
Support-list@support.elphel.com
http
global shutter sensors?
Regards,
Iakov(Yakov) Petrov.
On Sun, Jul 3, 2016 at 7:21 AM, support-list
support-list@support.elphel.com wrote:
Yakov,
Just one will definitely be enough, but there is no code to run these
sensor
boards. And as these sensors are rather old it may be easier
wrote
Hello Andrey. How many 10393 CPU boards I need to run 3 KAI11002 at
4.8 fps at 30mhz?
Regards,
Iakov(Yakov) Petrov.
On Mon, Aug 24, 2015 at 11:24 PM, support-list
support-list@support.elphel.com wrote:
Hello Yakov,
The 10393 boards (main boards of the NC393 cameras
cult. What do you mean by "controllers with sync"?
NC393 cameras will support the same inter-camera synchronization modes as NC353
has, we do not have any additional controllers but those implemented in the
camera.
Andrey
_______
Support-list
. Распишите пожалуйста
подробнее мои шаги, обязательно ли использование Wincamp?)
С уважением, Денис
Отправлено с iPhone
29 февр. 2016 г., в 10:26, support-list support-list@support.elphel.com
написал(а):
Hello Denis,
Camera does not have "factory reset", the button just allows to refla
images using just HTML5 canvas.
Andrey
___________
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
LAN) GPUs, etc.
What would be your recommendation for this particular project?
Kind regards,
Jennifer Valle
___________
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
s. Presentation time:
-760859674.779101 NPT: 0.00
Stream "rtsp://pa1"; video/JPEG: Received 97848 bytes. Presentation time:
-760859674.815178 NPT: 0.00
How could you get the correct timestamp the server gives each frame? Is it the
PresentationTime after RTCP is syncronized or is an anot
relation algorithms as the two images will be shifted not
along the expected disparity, but at some angle
Andrey
___________
Support-list-eyesis mailing list
Support-list-eyesis@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list-eyesis_support.elphel.com
direction, because the CMOS sensors scan each line of the image at different
time.
We will answer more to this question on the mailing list later today.
Best Regards,
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com
that Version 8.0+ is required for the MICRON NAND?
Will 8.0 also run on older boards?
Is it true that Version 7.X will run on Micron NAND only with kernel mods?
___
Support-list mailing list
Support-list@support.elphel.com
http
loss, or you can get for example exactly
each other frame) and this can be a more platform-independent solution and more
robust solution than streaming.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Harry,
With 10fps it should be 38 seconds.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Hello Sergio,
I'm very sorry you are having these problems.
Can you provide more details - what you are trying to achieve, what did you try
and what did not work?
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Hello Harry,
Can you try the same program with the CF attached to a regular PC running Linux
(to have the same code), not to the camera?
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman
.
Harry
On Wed, Mar 11, 2015 at 3:03 PM, support-list
lt;support-list@support.elphel.comgt; wrote:
Hello Harry,
Can you try the same program with the CF attached to a regular PC running Linux
(to have the same code), not to the camera?
Andrey
--
Best regards,
Harry Kim
Senior
on it. 10359 is
easier to use as you may just reset it and load a different bitstream without
rebooting the system. And the code is much simpler and easier to simulate and
Pamp;R.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
may use the
current lens to find the optimal focal length and then put a fixed-focus one
instead. There are many lenses 1/3 and 1/4 format we can try, including M12
ones with adapter.
Andrey
___
Support-list mailing list
Support-list
the things will start moving faster.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
to 20MHz
sensor power set low
will set to 0x41
will set to 0x30
will set to 0x28
will set to 0x24
will set to 0x22
.. full
trying MT9X001
can not program unknown/unexistent sensor
___
Support-list mailing list
Support-list@support.elphel.com
http
:
---
... Normal writing
IMU : 1403187956.383706
IMU : 1403187949.785603 1st re-writing
...
IMU : 1403187956.901786
IMU : 1403187950.303684 2nd re-writing
... Normal writing
---
where the same part is repeated three times.
Nils
Le 01. 12. 14 19:23, support-list-eyesis a écrit :
gt; Hi Nils
. There is nothing on your
website that allows me to unsubscribe.
From: Support-list [mailto:support-list-boun...@support.elphel.com] On
Behalf Of Luke McKay
Sent: Tuesday, November 18, 2014 2:15 PM
To: Support-list@support.elphel.com
Subject: [Elphel-support] Remove email
Can you please
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo
to
improper settings or factors I'm overlooking.
Andrey, can I send you the camera to take a look? Perhaps a refreshed
firmware and your experienced eyes can really help us out.
-Hamid
On 10/11/2014 03:44 PM, support-list wrote:
7da3289055.7045157628596740...@support.elphel.com
in front of the camera lens.
3) Yes, it is the main purpose of such cameras.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
://www.tc.umn.edu/~mokh0006
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
___
Support-list mailing
) of this particular
record.
Nils
--
Nils Hamel
Développeur mathématicien
E-mail : n.ha...@foxel.ch
http://www.foxel.ch
___
Support-list-eyesis mailing list
Support-list-eyesis@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list
with the new network chip.
Regards,
Hugo.
2014-07-21 23:35 GMT+02:00 Oleg support-list@support.elphel.com:
Hi Hugo,
Sorry, it took me to long to answer.
Yes, we received the camera.
The network chip on the system board doesn't work - burnt. It is possible to
replace it.
Best regards
cycle do it?
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
intergalactical headquarters
___
Support-list-eyesis mailing list
Support-list-eyesis@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list-eyesis_support.elphel.com
___
Support-list-eyesis
to generate the missing parts list with that old computer,
meanwhile you can just update the 10338A parts list using the 10338D circuit
diagram available on Elphel wiki - all parts are marked there.
Andrey
___
Support-list mailing list
Support-list
sincerely.
Stéphane
___
Support-list-eyesis mailing list
Support-list-eyesis@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list-eyesis_support.elphel.com
___
Support-list-eyesis mailing list
find the whole
shematics and documentation.
Your help is very appreciated :)
Thanks in advance!!
Somnus
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
v: +41 225 085 085 @ netvoip.ch
___
Support-list-eyesis mailing list
Support-list-eyesis@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list-eyesis_support.elphel.com
___
Support
366 v: +41 225 085 085 @ netvoip.ch
___
Support-list-eyesis mailing list
support-list-eye...@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list-eyesis_support.elphel.com
366 v: +41 225 085 085 @ netvoip.ch
___
Support-list-eyesis mailing list
Support-list-eyesis@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list-eyesis_support.elphel.com
synchronization in plain ERS mode with
the exposure set to full frame duration and than add two consecutive frames
that captured the flash.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo
We do not plan to add new sensors to the NC353 camera, but we will definitely
use more new sensors with the coming NC393 camera.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo
-0700 drouan lt;daniel.ro...@obspm.frgt;
wrote
Le 5 sept. 2013 à 23:44, support-list lt;support-list@support.elphel.comgt; a
écrit :
gt; Daniel
gt;
gt; For FPS control I meant using TRIG=4 as described in
http://wiki.elphel.com/index.php?title=Trigger
gt; TRIG_CONDITION=0 means
to latch the incoming data. and when the length of
the cable changes, so does the phase of the incoming data.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
of the parameter changes? Does the problem depend on the
frame rate or it can be reproduced on a single shot?
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support
The SATA
Port
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
the SATA port is disabled is there any possibility to enable
it.
Patrick
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
frame size of the image - that will force
camera to restore the correct frame.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
and compensate chromatic aberration of the lens.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
De : support-list
Envoyé : jeudi 6 juin 2013 01:14
À : Gergely Debreczeni; Elphel List
Objet : Re: [Elphel-support] camera image undistortion rectification
Gergely,
That camera is not calibrated - it is just hardware that allows to capture
by the FPGA timer.
In this mode all the sensors are guaranteed to work synchronously, so switching
from one to another will not cause any interruption.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman
camera that I'm working on
now.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Shane,
You can just remove the 10369 board - no reflashing is needed.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
it.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
match the images,
shift and rotation is the first thing to process.
What type of lenses did you get?
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
sending jpg or even if we have to sacrifice some fps.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
?
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo
://florestavermelha.org/tag/cinelerra/ Personally I do
not have much of experience with video editing.
Do yo send the elphel to another countries?
Yes, sure! - http://map.elphel.com/
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http
by motor start, without it
there are no significant start-up currents, and the required margin is lower.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
straight connection). And then verify
that your power source has + and - on the selected cable pins.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
, some of the publications linked/mirrored on our web site (for general
overview), and - ask specific questions on this Mailing List.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support
and running wget program. try something
different - javascript code loading XML from the camera (parsedit.php returns
XML request), or use some Python function.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Biel,
Maybe you can just post an example from your code that is can send/receive
telnet commands fast, but takes a whole 1-1.5 seconds to do it with http
request to the script running in the camera?
Andrey
___
Support-list mailing list
Support-list
Your mail to 'Support-list-eyesis' with the subject
Re: [Elphel-support] change camera parameters through Telnet
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post by non-member to a members-only list
Either the message will get posted
the change 1 second after I touch intro
2012/12/14 support-list lt;support-list@support.elphel.comgt;
Biel,
It will be quite a work to do a C program - as I said the easiest will be to
adapt the php extension code (written in C). But agan - I do not think you'll
get much of the performance gain
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
system (C64/C128), Atari ST, Apple Macintosh
(6502/68k/PPC only)
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
) - ring in the
picture . Yes, on the right on the image you can see both the 5mm adapter ring
(black anodized aluminum) and the black plastic cap that is screwed into it.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http
the index at the end of file,
but then you'll not be able to view it over the Internet simultaneously to
downloading.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support
Rvenkat.elp...@gmail.com wrote
Andrey,
On 10/19 I had sent a picture of the elphel camera to the support-list.
I wanted to see if you could tell whether it has the C to CS mount
adaptor ring. Looks like that email didn't make it to the list because
of the attachment. Could you
short explanation - what iis it - it appears as a tooltip
when you keep mouse pointer over it.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Venkat,
The current ImageJ version is newer - 1.46 while our wiki paged linked to 1.43
- I updated that page. Thank you for reporting this problem.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com
the range.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
) B(3,2) B (3,3) B(3,4)
B(4,1) B(4,2) B (4,3) B(4,4)
2) Now in this data which is the data correspondig to red , green and blue
Thanks,
Venkat
___
Support-list mailing list
Support-list
2) We are looking for a 20 degree viewing angle and guessing this may work.
Is that correct?
Venkat, yes - that should work. But we never used that lens so I can not rate
it.
Andrey
___
Support-list mailing list
Support-list@support.elphel.com
, rather than converting it to tiff file.
Would this data be be exactly similar to the data from the raw camera file?
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support
with a network shield) and
communicate via the network.
Input would be appreciated!
Shane
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Azad lt;khasha...@azad.ccgt; wrote:
Hi Andrey, thank you very much for your answer. It actually helps a lot.
Cheers.
Be Tireless
K
T: +61 2 8003 4787
F: +61 2 8103 2029
M: +61 400 419 626
On Wed, Sep 5, 2012 at 3:24 PM, support-list
lt;support-list@support.elphel.comgt; wrote:
Hello
-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support
.
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
, as it is
exposed.
When changing lenses, please remove the M12 lens together with it's adapter, as
a whole assembly.
Thank you for your order,
I will send you the confirmation number for tracking the shipment.
Best Regards,
___
Support-list mailing
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
.
Best Regards,
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
should have all the cables allowing you
to connect your PC's usb to that phone socket (as we usually ship them).The
n use minicom - 115200 8N1.
Best regards,
Oleg Dzhimiev
___
Support-list mailing list
Support-list@support.elphel.com
http
1 - 100 of 106 matches
Mail list logo