Kendall Bennett wrote:
Hi Guys,
I have been mass compiling and installing multiple versions of XFree86
onto a machine for compatibility testing (Red Hat 7.3 based, so I can use
the GDB hacked up debugger ;-). However whenever I do a 'make install'
from a freshly built 4.2.0, 4.2.1 or
Apparently the libexpat that is included with my OS doesn't
have the function XML_SetDoctypeDeclHandler and I've got
errors like:
../../../exports/lib/libfontconfig.so: undefined reference to
`XML_SetDoctypeDeclHandler'
Can I simply comment out the `XML_SetDoctypeDeclHandler' line in
An unnamed Administration source, Kendall Bennett, wrote:
% David Dawes [EMAIL PROTECTED] wrote:
%
% I guess you must have read something to even know about the existence
% of a host.def file. I presume that it was misleading, and so should
% be fixed.
%
% Yes, I have the file that I printed
On Sun, Mar 30, 2003 at 03:19:14PM -0800, Frank Liu wrote:
Apparently the libexpat that is included with my OS ...
That's your problem. XFree86 should use the bundled libexpat. Try to
find out why that doesn't work instead of patching XFree86 sources.
Kind regards
--
Matthias Scheler
I recently installed Red Hat Linux 7.3 on my system, but X fails to
start up properly. When X attempts to start up, it prints the
following message:
XIO: fatal error 104 (Connection reset by peer) on X server :0.0
after 0 requests (0 known processed) with 0 minutes remaining
[repeats 9 more
Hi,
I am unable to go to the GUI environment in linux. It
directly goes to the shell environment even though I
selected GUI mode during installation. Also, 'startx'
command gives an error stating 'fatal server error, no
screens found'. It also gives that
XIO: Fatal IO error 104(Connection
-
Hot Mobiil - helinad, logod ja piltsõnumid!
http://portal.hot.ee
XFree86.0.log.old
Description: XFree86.0.log.old
[This e-mail has been automatically generated.]
You have one or more bugs assigned to you in the Bugzilla
bugsystem (http://bugs.xfree86.org/) that require
attention.
All of these bugs are in the NEW state, and have not been touched
in 7 days or more. You need to take a look at them,
Anyone know if it's possible to adjust the brightness on the 23 HD
cinema display? I have been parsing through the docs, but nothing
stood out. I attempted to adjust DigitalVibrance, but that did not
work. Any thoughts?
Thanks,
Ryan
___
XFree86
Cannot run xwindows in Debian 3.0 Woody although my system works fine in
Redhat 8.0
Please help.
Thanks
_
XFree86.0.log
Description: Binary data
XF86Config
Description: Binary data
What does it say the version of ATI Menu cfg
does say vesa because if that was case you did not complie it with the
kernel source because this is were i got stuck.
From: Paul [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [XFree86] ATI 9000 Pro in Red Hat 8.0
On Son, 2003-03-30 at 09:52, Prateek Mohan Dayal wrote:
I was trying to make the above file
BTW, AFAIK the DRM that comes with the 2.4.20 kernel should work with
XFree86 4.2.0.
but the process terminates with the error ... please help me
the error is
make: *** [gamma_drv.o] Error 1
[This e-mail has been automatically generated.]
http://bugs.xfree86.org//cgi-bin/bugzilla/show_bug.cgi?id=74
Summary: Screen is corrupted after lcd backlight turns of
Product: Drivers
Version: 4.3
OS/Version: Linux
Status: NEW
It would help to help you if you would provide some information. The
GUI is provided by the program XFree86 which uses a configuration file
usually called something like XF86Config. If you could post that file
and the log file created by XFree86, it could provide a lot of
information about what
[This e-mail has been automatically generated.]
http://bugs.xfree86.org//cgi-bin/bugzilla/show_bug.cgi?id=75
Summary: S3Savage4 Problems in XFree86 4.3
Product: Drivers
Version: 4.3
OS/Version: Linux
Status: NEW
Severity:
I installed redhat 8.0 on my PC
IBM Netvista M42 8307-2g
graphic card :intel 82845g
monitor samsung SyncMaster 172b
Running startx I received the linked
output
Please can you help me?
Waiting for your answer
Vincenzo Lenti
X
Description: Binary data
[This e-mail has been automatically generated.]
http://bugs.xfree86.org//cgi-bin/bugzilla/show_bug.cgi?id=76
Summary: Missing pixel column on LCD with radeon7500
Product: Drivers
Version: 4.2
OS/Version: Linux
Status: NEW
I think I've figured this one out. If you list the screen resolutions
(in the Screen section) with a higher resolution AFTER a lower
resolution, then the first resolution in the list will be the default
with the highest resolution in the list being the resolution of the
virtual display that
Post your XF86Config file. Just a hunch, but if you have a spare
monitor around, try another monitor. If you don't, try entering the
Horiz and Vert frequencies yourself. You might be able to get that
information from www.monitorworld.com.
Paul
On Sun, 2003-03-30 at 08:42, [EMAIL PROTECTED]
(If you think you've seen a question like this before, you probably have
-- I've posted it in a number of places, including the
[EMAIL PROTECTED] list with the mistaken notion that it was the one
list that replaced all (or most) of the old XFree86.org lists (like
xpert). I've also posted this
[This e-mail has been automatically generated.]
http://bugs.xfree86.org//cgi-bin/bugzilla/show_bug.cgi?id=53
--- Additional Comments From [EMAIL PROTECTED] 2003-03-30 15:27 ---
In addition, the model in some of the examples does not exist in 4.3 (did in 4.2
though):
Hi Folks,
Please see the attached log file.
I had a small disk running Linux 5.2. I unsized the disk and installed 8.0
with everything other than the disk and the OS version the same. When
startx is executed a brief black screen appears then I get the command line
prompt again. If I
(EE) xf86OpenSerial: Cannot open device /dev/mouse
No such file or directory.
Either that's the incorrect device for your mouse or
your kernel is not supporting your mouse.
Mark.
On Sun, 30 Mar 2003, Kevin W Chen wrote:
I recently installed Red Hat Linux 7.3
On 30 Mar 2003, Matty wrote:
Anyone know if it's possible to adjust the brightness on the 23 HD
cinema display? I have been parsing through the docs, but nothing
stood out. I attempted to adjust DigitalVibrance, but that did not
work. Any thoughts?
If I recall correctly, brightness on
On Sun, 30 Mar 2003, Einari Lappo wrote:
Hi,
I just got Mandrake 9.1 installed, but I'm having some troubles with X. I
have set my resolution to be 1280x1024, but I only get a virtual 1280x1024
screen while my actual screen resolution is only 640x480. When answering
no to xf86config's
Hello,
I have an Ati Radeon 8500 All In Wonder
DV.
In the past i used 'Option "CrtScreen"' in the
monitor section in de XF86Config-4 file to make it work. But now i run Manadrake
9.1 with xfree86 4.3.0, and i have no result on startx. I have also a TV
connected wich does show nothing
I see a fair amount of discussion about transparency one place or the
other, and although it seems to be a nifty trick, what advantage does
it provide, in what kind(s) of applications?
I recently installed Knoppix on one of my machines and kde 3.0.4
apparently includes transparent
I'm learning Solaris as I go; and was hoping to stick it on my laptop, but can't seem
to get the video drivers just right with the intel 830m video card. anyone had any
luck as of yet?
Thanks
Travis Knabe
Systems Manager
Office: 503-838-8507
Cell: 503-551-4953
[This e-mail has been automatically generated.]
http://bugs.xfree86.org//cgi-bin/bugzilla/show_bug.cgi?id=78
Summary: DRI locks up XF86
Product: Drivers
Version: 4.3
OS/Version: Linux
Status: NEW
Severity: major
On Sun, Mar 30, 2003 at 04:26:29PM -0500, Mark Vojkovich scrawled:
On 30 Mar 2003, Matty wrote:
Anyone know if it's possible to adjust the brightness on the 23 HD
cinema display? I have been parsing through the docs, but nothing
stood out. I attempted to adjust DigitalVibrance, but that did
On Mon, 31 Mar 2003, Daniel Stone wrote:
On Sun, Mar 30, 2003 at 04:26:29PM -0500, Mark Vojkovich scrawled:
On 30 Mar 2003, Matty wrote:
Anyone know if it's possible to adjust the brightness on the 23 HD
cinema display? I have been parsing through the docs, but nothing
stood out. I
On Sun, Mar 30, 2003 at 06:27:38PM -0500, Mark Vojkovich scrawled:
On Mon, 31 Mar 2003, Daniel Stone wrote:
On Sun, Mar 30, 2003 at 04:26:29PM -0500, Mark Vojkovich scrawled:
On 30 Mar 2003, Matty wrote:
Anyone know if it's possible to adjust the brightness on the 23 HD
cinema
[This e-mail has been automatically generated.]
http://bugs.xfree86.org//cgi-bin/bugzilla/show_bug.cgi?id=74
--- Additional Comments From [EMAIL PROTECTED] 2003-03-30 18:41 ---
Yes, the blanking is probably caused by the BIOS, so the screen garbage may not
actually be a
An unnamed Administration source, Jesse Hutton, wrote:
% Does anyone know of a good modeline generator? I have a Viewsonic P95f
% monitor (video bandwidth of 285Mhz), and I would like to see how it looks
% with a refresh rate of about 100 (and my video card is a Matrox G550) at
% 1280x960
Could you explain in greater detail what do you mean by unsized the
disk? What is your hardware configuration and how was it different for
each installation? Did you select everything when the package manager
came up in the Red Hat 8.0 installation? If your hard drive was too
small, it might
While loading Linux in Graphical Mode generates the error attached.
Please have a look and let me know how to resolve this.
Regards,
Asim Ansari
Sr. Network Administrator
*
i2c Inc.
4 Old FCC Ferozepur Road,
Lahore 54660.
PAKISTAN.
[This e-mail has been automatically generated.]
http://bugs.xfree86.org//cgi-bin/bugzilla/show_bug.cgi?id=80
Summary: 4.3 freezes on SMP with xinerama
Product: XFree86 Server
Version: 4.3
OS/Version: Linux
Status: NEW
While loading Linux in Graphical Mode generates the error
attached. Please have a look and let me know how to resolve this.
Regards,
Asim Ansari
Sr. Network Administrator
*
i2c Inc.
4 Old FCC Ferozepur Road,
Lahore 54660.
PAKISTAN.
You need to start your font server.
Tom
ps
Message
On Monday 31 March 2003 8:24 am, Asim Ansari wrote:
While loading Linux in Graphical Mode generates the error attached.
Please have a look and let me know how to resolve this.
Regards,
Sig:
Asim Ansari
Sr. Network Administrator
39 matches
Mail list logo