Actually I believe I was able to resolve the issue using community.elphel.com/bootblock393/
-Mohamed On Fri, Apr 6, 2018 at 9:08 AM, Mohamed Morsy <mmo...@redzone.com> wrote: > Oleg, > > Thank you. That worked. > > I was also having another problem. I've been using 14 MPix sensors. I > followed the instructions on the new update and was able to get them to > work. However, when I use this SSD, the sensors don't seem to work anymore. > Is there a fix for this? > > Regards, > > Mohamed > > On Thu, Apr 5, 2018 at 4:41 PM, Oleg <support-list@support.elphel.com> > wrote: > >> Hi Mohamed, >> >> 1. http://camera-ip > Recorder >> docs: https://wiki.elphel.com/wiki/Camogmgui >> >> 2. There should be 2 partitions on SSD: >> sda1 ~6GB - formatted to EXT4 - sda1 is automounted to /mnt/sda1 (check >> with 'df -h' or ) >> sda2 ~122GB - not formatted - for 'raw' recording >> >> If it's not formatted, see 4b.. >> >> Other info: >> 3. To check if SSD is detected: >> >> 3a. >> >>> root@elphel393:~# cat /proc/partitions >> >> >> 3b. >> >>> root@elphel393:~# dmesg >> >> >> Example output: >> >>> [ 23.160946] ata1: SATA max UDMA/133 mmio [mem 0x80000000-0x80000fff] >>> port 0x100 irq 163 >>> [ 23.510004] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >>> [ 23.517599] ata1.00: ATA-9: TS128GMTS600, P1225CE, max UDMA/133 >>> [ 23.523846] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth >>> 0/32) >>> [ 23.532486] ata1.00: configured for UDMA/133 >>> [ 23.541610] scsi 0:0:0:0: Direct-Access ATA TS128GMTS600 >>> 5CE PQ: 0 ANSI: 5 >>> [ 23.555202] sd 0:0:0:0: Attached scsi generic sg0 type 0 >>> [ 23.555418] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 >>> GB/119 GiB) >>> [ 23.556425] sd 0:0:0:0: [sda] Write Protect is off >>> [ 23.556437] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>> [ 23.556545] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>> enabled, doesn't support DPO or FUA >>> [ 23.583494] sda: sda1 sda2 >>> [ 23.591877] sd 0:0:0:0: [sda] Attached SCSI disk >>> [ 24.171488] random: nonblocking pool is initialized >>> [ 24.950555] EXT4-fs (sda1): recovery complete >>> [ 24.956238] EXT4-fs (sda1): mounted filesystem with ordered data >>> mode. Opts: (null) >> >> >> 3c. >> >>> root@elphel393:~# hdparm -I /dev/sda >> >> >> >> >> 4. Some information if you would like to reformat it: >> 4a. https://wiki.elphel.com/wiki/Format_SSD_MMC#SSD_or_USB >> Mainly it's 2 programs: fdisk and mkfs >> >> 4b. http://192.168.0.9/format_disk.php >> >> Let me know if you have any further questions or need more details. >> >> Best regards, >> Oleg Dzhimiev >> Electronics Engineer >> phone: +1 801 783 5555 x124 >> Elphel, Inc. >> > >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
