I'm using 3 sensors. Sometimes only one shows up (it isn't always the same port).
On Mon, Apr 9, 2018 at 1:58 PM, Oleg <support-list@support.elphel.com> wrote: > Mohamed, > > >> I reformatted the drive so sda2 is raw. Now I'm trying to copy a >> recording from there. I'm not sure what you meant by: >> run https://git.elphel.com/Elphel/eyesis4pi-393-gui/blob/mas >> ter/footage_downloader/split_mov.php from inside the directory with >> image.bin >> > > I meant - download the script and run it (provided php is installed), for > example: > * save the split_mov.php to directory with downloaded footage (<some_dir>) > Then in terminal: > $ cd <some_dir> > $ php split_mov.php > > * The footage can be the one you downloaded from the raw partition or you > can test with any .mov (just change the extension to .bin). > * The script scans the working directory (<some_dir>) for *.bin files then > opens them as binary, looks for images (by exif header marker) and extracts > them. > > Also, when I use the 14MPx sensors with nand, the cameras don't always >> show up. Sometimes only one shows up or none of them do. Any ideas what >> might be wrong? >> > Don't know, need to test. > Are there 2 sensors? > When a single sensor shows up - is it always the same port? which one? > > Best regards, > Oleg Dzhimiev > Electronics Engineer > phone: +1 801 783 5555 x124 > Elphel, Inc. >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com