Also, how can I remove the files from the sda2 partition once I'm done? On Mon, Apr 9, 2018 at 2:26 PM, Mohamed Morsy <mmo...@redzone.com> wrote:
> I'm using 3 sensors. Sometimes only one shows up (it isn't always the same > port). > > On Mon, Apr 9, 2018 at 1:58 PM, Oleg <support-list@support.elphel.com> > wrote: > >> Mohamed, >> >> >>> I reformatted the drive so sda2 is raw. Now I'm trying to copy a >>> recording from there. I'm not sure what you meant by: >>> run https://git.elphel.com/Elphel/eyesis4pi-393-gui/blob/mas >>> ter/footage_downloader/split_mov.php from inside the directory with >>> image.bin >>> >> >> I meant - download the script and run it (provided php is installed), for >> example: >> * save the split_mov.php to directory with downloaded footage (<some_dir>) >> Then in terminal: >> $ cd <some_dir> >> $ php split_mov.php >> >> * The footage can be the one you downloaded from the raw partition or you >> can test with any .mov (just change the extension to .bin). >> * The script scans the working directory (<some_dir>) for *.bin files >> then opens them as binary, looks for images (by exif header marker) and >> extracts them. >> >> Also, when I use the 14MPx sensors with nand, the cameras don't always >>> show up. Sometimes only one shows up or none of them do. Any ideas what >>> might be wrong? >>> >> Don't know, need to test. >> Are there 2 sensors? >> When a single sensor shows up - is it always the same port? which one? >> >> Best regards, >> Oleg Dzhimiev >> Electronics Engineer >> phone: +1 801 783 5555 x124 >> Elphel, Inc. >> > >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
