It seems we are both having the same basic issue. I am assuming that you are able to connect out via the same OPT2 interface you are trying to connect in thru. I wish I had more answer for you than I am having this trouble too. No one has responded to my emails. If I find the source of my problem, I will let you know.
Robert On Thursday 29 March 2007 07:13, Vaughn L. Reid III wrote: > I am running the 3-27 snapshot of pfsense. > > I've been testing out adding a 2nd OPT interface that goes to remote > sites over a wireless link. A dedicated access point is doing all the > wireless stuff, so that is not a responsibility of the pfsense box. > Here's my problem though. > > I can ping remote hosts from the pfsense box and can ping the remote > hosts from the LAN interface. Remote hosts show up in my arp table on > the pfsense box and remote hosts can see the pfsense box in their arp > tables. I have a firewall rule configured to all all traffic going into > and coming out of the interface on the pfsense box (Once I get things > working, I'll lock this down some). > > Firewall Rule: > Proto * Source * Destination * Port * Gateway * > > The firewall log shows that the pfsense box is accepting inbound > requests, but nothing happens. The remote hosts can't ping the pfsense > machine, connect to it in any way, or access resources that lie behind it. > > I do not have a NAT rule set for this interface, and I'm using Advanced > NAT. I don't want to perform NAT on this interface, just routing. > > The IP of the OPT interface on the pfsense box is 172.16.125.1/24 with > no gateway defined for the interface. All of the remote hosts are in > the 172.16.125.0/24 subnet and they have the pfsense box set up as their > default gateway. The diagnostic => routes page shows the correct > interface as for the route to the 172.16.125.0/24 network and also shows > a route to each host. > > Am I missing something that I need to have configured that I don't? My > other OPT interface to a dsl connection is working correctly. > > Thanks, > > Vaughn > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]