Overlapping AD Subnet Boundarieshello, just to stop the troll... Do you understand my others post about your network ? Is you DC set up on its network interface with a 255.255.0.0 netmask ?
Your setup will work fine from an AD point of view (dssite.msc) , but not an IP routing point of view if you are really using a 255.255.0.0 Regards, Mathieu CHATEAU http://lordoftheping.blogspot.com ----- Original Message ----- From: Brian Cline To: ActiveDir@mail.activedir.org Sent: Friday, January 26, 2007 10:19 PM Subject: [ActiveDir] Overlapping AD Subnet Boundaries Say I create an AD subnet of 10.10.0.0/16 and assign it to our primary site, and another subnet as 10.10.41.0/24 and assign it to a secondary site. Will AD treat a client address of, say, 10.10.41.104 as a client on the secondary site, or will it default to the more general primary subnet? The reason I ask is we now have a need for a second AD site (I can see all the enterprise folks grinning now) and we have quite a number of other subnets that I'd have to manually enter if this is not the case. I don't mind doing it, but I was curious either way. Brian Cline, Applications Developer Department of Information Technology G&P Trucking Company, Inc. 803.936.8595 Direct Line 800.922.1147 Toll-Free (x8595) 803.739.1176 Fax