I’ve popped a couple SyncInjectors due to water in one of the jacks (mounted with jacks facing up, I’ll never do that again). I take it there’s a replaceable fuse inside? I’ll have to open them up and see if I can fix them.
From: Josh Luthman via Af Sent: Saturday, November 29, 2014 3:55 PM To: [email protected] Subject: Re: [AFMUG] ePMP and/or Gig SyncInjector problems So I just got back...fuse popped on that SyncInjector. Not sure why. There was a Ubnt Beam on it - the cable was moved to the POE injector and fuse replaced. SyncInjector is working as expected right now. Sure hoping Forrest can do next day shipping on Monday =) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sat, Nov 29, 2014 at 3:39 PM, Forrest Christian (List Account) via Af <[email protected]> wrote: See http://tickets.packetflux.com/kb/faq.php?id=2 6 blinks = power missing/too low. And yes, you need a syncpipe. -forrest On Fri, Nov 28, 2014 at 6:46 PM, Josh Luthman via Af <[email protected]> wrote: Here's a video, not sure what the blinking means? https://www.youtube.com/watch?v=dME8A-H_590 Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Nov 28, 2014 at 8:39 PM, Josh Luthman via Af <[email protected]> wrote: *rb2011 with ports 2/3/4/5 set to hardware switch (ether2 master, 3/4/5 slave). Ports 6/7/8/9 are hardware switch (ether6 master, 7/8/9 slave). *From the rb2011 it goes to the Ethernet half of the SyncInjector. *From the POE half of the SyncInjector it goes to WB gigeapc HV surge suppressors and then to the ePMP radios. Two of the ePMP radios are powered up and running gige. Neither are receiving CMM sync (top of the ePMP says "Not receiving GPS sync"). The remaining 6 APs aren't even powering up/linking up. Any ideas before I start swapping parts? Is it OK to have the surge between SyncInjectors and ePMP? On top of all of this the SiteMonitor isn't talking to the POE injector or the two Gig SyncInjectors. I have them all daisy chained and verified they're snapped in place. The POE injector is powering Ubnt radios just fine. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
