OK, I'll have to triple check the power on that sync injector. Also need a sync pipe. Anyone have a spare near Dayton Ohio?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 28, 2014 9:31 PM, "George Skorup (Cyber Broadcasting) via Af" < [email protected]> wrote: > From the Base unit's expansion bus. The SyncInjectors will provide their > own power to their exp. bus if the input block has (usable) voltage, > otherwise it will pull power from the Base. Expansion bus only, NOT power > for the radios, that's completely separate. > > On 11/28/2014 8:22 PM, Josh Luthman via Af wrote: > > Well how would the light turn on if it didn't have power? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Nov 28, 2014 at 9:17 PM, George Skorup (Cyber Broadcasting) via Af > <[email protected]> wrote: > >> Six flashes, I'm trying to remember. I thought that means no power on >> the input block. Could mean no sync. But I'm thinking power, which would >> explain why your APs on that second injector won't come up at all. >> >> Yes, you definitely need a SyncPipe connected to one of the >> SyncInjectors. The sync daisy chain just means you can propagate the sync >> pulse from a "master" SyncInjector to a number of other ones. >> >> On 11/28/2014 8:07 PM, Josh Luthman via Af wrote: >> >> Oh forgot to mention power - everything is 24vdc from the same circuit >> (fuses are tested good from multimeter, 24v at every terminal). Note two >> of the APs are working on one gig sync injector where the other sync >> injector has 0 working APs. >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Fri, Nov 28, 2014 at 9:05 PM, Josh Luthman < >> [email protected]> wrote: >> >>> SiteMonitor isn't showing any of the three expansion parts (poe injector >>> and 2x gig syncinjectors). >>> >>> Is a SyncPipe Basic required for the syncinjectors to work? Or do >>> they have an GPS radio? I'm not seeing any documentation saying it's >>> necessary, but it's mentioning it a lot... >>> >>> Will the gig syncinjectors still utilize 10 or 100 mbit? >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Fri, Nov 28, 2014 at 9:01 PM, Nate Burke via Af <[email protected]> >>> wrote: >>> >>>> Does your site monitor show anything out of the ordinary? What are >>>> you using to provide sync to the sync injector? The green lights on both >>>> should blink once per second when they have sync. >>>> >>>> >>>> On 11/28/2014 7:46 PM, Josh Luthman via Af wrote: >>>> >>>> Here's a video, not sure what the blinking means? >>>> >>>> https://www.youtube.com/watch?v=dME8A-H_590 >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Fri, Nov 28, 2014 at 8:39 PM, Josh Luthman via Af <[email protected]> >>>> wrote: >>>> >>>>> *rb2011 with ports 2/3/4/5 set to hardware switch (ether2 master, >>>>> 3/4/5 slave). Ports 6/7/8/9 are hardware switch (ether6 master, 7/8/9 >>>>> slave). >>>>> *From the rb2011 it goes to the Ethernet half of the SyncInjector. >>>>> *From the POE half of the SyncInjector it goes to WB gigeapc HV surge >>>>> suppressors and then to the ePMP radios. >>>>> >>>>> Two of the ePMP radios are powered up and running gige. Neither are >>>>> receiving CMM sync (top of the ePMP says "Not receiving GPS sync"). The >>>>> remaining 6 APs aren't even powering up/linking up. Any ideas before I >>>>> start swapping parts? Is it OK to have the surge between SyncInjectors >>>>> and >>>>> ePMP? >>>>> >>>>> On top of all of this the SiteMonitor isn't talking to the POE >>>>> injector or the two Gig SyncInjectors. I have them all daisy chained and >>>>> verified they're snapped in place. The POE injector is powering Ubnt >>>>> radios just fine. >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>> >>>> >>>> >>> >> >> > >
