Well how would the light turn on if it didn't have power?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Nov 28, 2014 at 9:17 PM, George Skorup (Cyber Broadcasting) via Af < [email protected]> wrote: > Six flashes, I'm trying to remember. I thought that means no power on > the input block. Could mean no sync. But I'm thinking power, which would > explain why your APs on that second injector won't come up at all. > > Yes, you definitely need a SyncPipe connected to one of the SyncInjectors. > The sync daisy chain just means you can propagate the sync pulse from a > "master" SyncInjector to a number of other ones. > > On 11/28/2014 8:07 PM, Josh Luthman via Af wrote: > > Oh forgot to mention power - everything is 24vdc from the same circuit > (fuses are tested good from multimeter, 24v at every terminal). Note two > of the APs are working on one gig sync injector where the other sync > injector has 0 working APs. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Nov 28, 2014 at 9:05 PM, Josh Luthman <[email protected] > > wrote: > >> SiteMonitor isn't showing any of the three expansion parts (poe injector >> and 2x gig syncinjectors). >> >> Is a SyncPipe Basic required for the syncinjectors to work? Or do they >> have an GPS radio? I'm not seeing any documentation saying it's necessary, >> but it's mentioning it a lot... >> >> Will the gig syncinjectors still utilize 10 or 100 mbit? >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Fri, Nov 28, 2014 at 9:01 PM, Nate Burke via Af <[email protected]> >> wrote: >> >>> Does your site monitor show anything out of the ordinary? What are you >>> using to provide sync to the sync injector? The green lights on both >>> should blink once per second when they have sync. >>> >>> >>> On 11/28/2014 7:46 PM, Josh Luthman via Af wrote: >>> >>> Here's a video, not sure what the blinking means? >>> >>> https://www.youtube.com/watch?v=dME8A-H_590 >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Fri, Nov 28, 2014 at 8:39 PM, Josh Luthman via Af <[email protected]> >>> wrote: >>> >>>> *rb2011 with ports 2/3/4/5 set to hardware switch (ether2 master, 3/4/5 >>>> slave). Ports 6/7/8/9 are hardware switch (ether6 master, 7/8/9 slave). >>>> *From the rb2011 it goes to the Ethernet half of the SyncInjector. >>>> *From the POE half of the SyncInjector it goes to WB gigeapc HV surge >>>> suppressors and then to the ePMP radios. >>>> >>>> Two of the ePMP radios are powered up and running gige. Neither are >>>> receiving CMM sync (top of the ePMP says "Not receiving GPS sync"). The >>>> remaining 6 APs aren't even powering up/linking up. Any ideas before I >>>> start swapping parts? Is it OK to have the surge between SyncInjectors and >>>> ePMP? >>>> >>>> On top of all of this the SiteMonitor isn't talking to the POE >>>> injector or the two Gig SyncInjectors. I have them all daisy chained and >>>> verified they're snapped in place. The POE injector is powering Ubnt >>>> radios just fine. >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>> >>> >>> >> > >
