Power down the omni and see if your results improve. FSK is far more robust in noisy environments. John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) 708-1937
-----Original Message----- From: "Craig House" <[email protected]> Sent: Friday, January 23, 2015 7:25am To: [email protected] Subject: Re: [AFMUG] Epmp newbee Ok so as an experiment I moved my 2.4 FSK omni to the same channel that this EPMP sector was on at the same height on the same tower. All 41 customers reconnected to the fsk omni and all link tests are in the upper 95% and better on all customers So why would this spectrum be so dirty for the 90 degree EPMP sector but usable and great link tests for the FSK omni at the same height.? From: "Craig House" <[email protected]> To: [email protected] Sent: Thursday, January 22, 2015 8:24:27 PM Subject: Re: [AFMUG] Epmp newbee Cant use 5Ghz All my BH links are in 5ghz and I cant get though trees with 5ghz. 90% of my customer base is behind trees. This is not the tower I plan on leaving it on. But I dont understand why the noise floor would be that high here. It is 3 miles from any town and sits in the middle of nothing. Cow pastures all around. Unless the cows are carrying wireless routers?? From: "John Woodfield" <[email protected]> To: [email protected] Sent: Thursday, January 22, 2015 8:12:39 PM Subject: Re: [AFMUG] Epmp newbee I would suggest 5ghz. Thats is stupid high for 2.4... John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) 708-1937 -----Original Message----- From: "Craig House" <[email protected]> Sent: Thursday, January 22, 2015 9:07pm To: "[email protected]" <[email protected]> Subject: Re: [AFMUG] Epmp newbee Yes I'm using a 90° sector and that AP is 180 feet up Sent from my iPhone On Jan 22, 2015, at 19:28, John Woodfield <[ [email protected] ]( mailto:[email protected] )> wrote: That noise floor is horrible. I usually don't see it that bad even at 200' in the air. Are you using a sector? John Woodfield Delmarva WiFi [ http://www.delmarvawifi.com ]( http://www.delmarvawifi.com ) cell (410) 708-1937 -----Original Message----- From: "Craig House" <[ [email protected] ]( mailto:[email protected] )> Sent: Thursday, January 22, 2015 7:59pm To: "[ [email protected] ]( mailto:[email protected] )" <[ [email protected] ]( mailto:[email protected] )> Subject: Re: [AFMUG] Epmp newbee Yes sorry. Capacity is bad. Quality is good Sent from my iPhone On Jan 22, 2015, at 18:57, Josh Luthman <[ [email protected] ]( mailto:[email protected] )> wrote: Quality? On Jan 22, 2015 7:39 PM, "Craig House" <[ [email protected] ]( mailto:[email protected] )> wrote: Ok done. I have a -56 signal at the SM attached is a screenshot of the analysis. -75 around the channel that I am on with the apj So that is not the problem. Why would I have only 15% to 40% uplink capacity when I have 95-100% capacity and a -56 signal From: "Mike Hammett" <[ [email protected] ]( mailto:[email protected] )> To: [ [email protected] ]( mailto:[email protected] ) Sent: Thursday, January 22, 2015 6:20:07 PM Subject: Re: [AFMUG] Epmp newbee Have Java installed, run that program. Connect to that radio. ----- Mike Hammett Intelligent Computing Solutions [ http://www.ics-il.com ]( http://www.ics-il.com ) [ ]( https://www.facebook.com/ICSIL )[ ]( https://plus.google.com/+IntelligentComputingSolutionsDeKalb )[ ]( https://www.linkedin.com/company/intelligent-computing-solutions )[ ]( https://twitter.com/ICSIL ) From: "Craig House" <[ [email protected] ]( mailto:[email protected] )> To: [ [email protected] ]( mailto:[email protected] ) Sent: Thursday, January 22, 2015 5:55:54 PM Subject: Re: [AFMUG] Epmp newbee So I switch the AP to Spectrum analyzer mode and reboot. Got to the spec analyzer tab and click download tool. How do I use it. It is a separate utility that my laptop doesn't know how to use the file? From: "Josh Luthman" <[ [email protected] ]( mailto:[email protected] )> To: [ [email protected] ]( mailto:[email protected] ) Sent: Thursday, January 22, 2015 5:39:34 PM Subject: Re: [AFMUG] Epmp newbee Monitor wireless might have a scan what you're after. I think that's only compatible (ie TDD OR wifi not both) networks seen. Uplink issue, noise and all that basic rf stuff? Josh Luthman Office: [ 937-552-2340 ]( tel:937-552-2340 ) Direct: [ 937-552-2343 ]( tel:937-552-2343 ) 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 22, 2015 6:07 PM, "Craig House" <[ [email protected] ]( mailto:[email protected] )> wrote: I've been using cambium/Motorola FSK products now for 10 years but the EPMP product has a few things that I can't quite get to work The main one that concerns me is that I'm using an integrated SM and at any distance from the tower I can make it connect as long as I know the SSID. But what is the trick to making it show available SS IDs to connect to sort of like the scan available access points feature in ubiquity? The second question is that even a very close distances and was very good signals like -53 I have difficulty getting good uplink capacity the quality seems to be reasonable 90% or above but the capacity varies from 15% to 45% most of the time and it's obvious in the speed test that the uplink is not doing what it should What am I doing wrong photo is attached of what I'm talking about in the second question Sent from my iPhone
