Yeah I was afraid of that I hate it when I do things right and it still doesn't work
Sent from my iPhone > On Jan 23, 2015, at 07:04, John Woodfield <[email protected]> wrote: > > Sounds like you're stuck. > > > > John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) 708-1937 > > > -----Original Message----- > From: "Craig House" <[email protected]> > Sent: Friday, January 23, 2015 7:56am > To: "[email protected]" <[email protected]> > Subject: Re: [AFMUG] Epmp newbee > > I did that no improvement in the spectrum analyzer other than at the channel > where the FSK was located still pretty much an average of -66 or worse > > Sent from my iPhone > > On Jan 23, 2015, at 06:48, John Woodfield <[email protected]> wrote: > > Power down the omni and see if your results improve. FSK is far more robust > in noisy environments. > > > > John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) 708-1937 > > > -----Original Message----- > From: "Craig House" <[email protected]> > Sent: Friday, January 23, 2015 7:25am > To: [email protected] > Subject: Re: [AFMUG] Epmp newbee > > Ok so as an experiment I moved my 2.4 FSK omni to the same channel that this > EPMP sector was on at the same height on the same tower. All 41 customers > reconnected to the fsk omni and all link tests are in the upper 95% and > better on all customers > So why would this spectrum be so dirty for the 90 degree EPMP sector but > usable and great link tests for the FSK omni at the same height.? > From: "Craig House" <[email protected]> > To: [email protected] > Sent: Thursday, January 22, 2015 8:24:27 PM > Subject: Re: [AFMUG] Epmp newbee > Cant use 5Ghz All my BH links are in 5ghz and I cant get though trees with > 5ghz. 90% of my customer base is behind trees. This is not the tower I plan > on leaving it on. But I dont understand why the noise floor would be that > high here. It is 3 miles from any town and sits in the middle of nothing. > Cow pastures all around. Unless the cows are carrying wireless routers?? > From: "John Woodfield" <[email protected]> > To: [email protected] > Sent: Thursday, January 22, 2015 8:12:39 PM > Subject: Re: [AFMUG] Epmp newbee > I would suggest 5ghz. Thats is stupid high for 2.4... > John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) 708-1937 > > -----Original Message----- > From: "Craig House" <[email protected]> > Sent: Thursday, January 22, 2015 9:07pm > To: "[email protected]" <[email protected]> > Subject: Re: [AFMUG] Epmp newbee > Yes I'm using a 90° sector and that AP is 180 feet up > Sent from my iPhone > > On Jan 22, 2015, at 19:28, John Woodfield <[email protected]> wrote: > That noise floor is horrible. I usually don't see it that bad even at 200' in > the air. Are you using a sector? > > > > John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) 708-1937 > > -----Original Message----- > From: "Craig House" <[email protected]> > Sent: Thursday, January 22, 2015 7:59pm > To: "[email protected]" <[email protected]> > Subject: Re: [AFMUG] Epmp newbee > Yes sorry. Capacity is bad. Quality is good > Sent from my iPhone > > On Jan 22, 2015, at 18:57, Josh Luthman <[email protected]> wrote: > Quality? >> On Jan 22, 2015 7:39 PM, "Craig House" <[email protected]> wrote: >> Ok done. I have a -56 signal at the SM attached is a screenshot of the >> analysis. -75 around the channel that I am on with the apj >> So that is not the problem. Why would I have only 15% to 40% uplink >> capacity when I have 95-100% capacity and a -56 signal >> From: "Mike Hammett" <[email protected]> >> To: [email protected] >> Sent: Thursday, January 22, 2015 6:20:07 PM >> Subject: Re: [AFMUG] Epmp newbee >> Have Java installed, run that program. Connect to that radio. >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> From: "Craig House" <[email protected]> >> To: [email protected] >> Sent: Thursday, January 22, 2015 5:55:54 PM >> Subject: Re: [AFMUG] Epmp newbee >> So I switch the AP to Spectrum analyzer mode and reboot. Got to the spec >> analyzer tab and click download tool. How do I use it. It is a separate >> utility that my laptop doesn't know how to use the file? >> From: "Josh Luthman" <[email protected]> >> To: [email protected] >> Sent: Thursday, January 22, 2015 5:39:34 PM >> Subject: Re: [AFMUG] Epmp newbee >> Monitor wireless might have a scan what you're after. I think that's only >> compatible (ie TDD OR wifi not both) networks seen. >> Uplink issue, noise and all that basic rf stuff? >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >>> On Jan 22, 2015 6:07 PM, "Craig House" <[email protected]> wrote: >>> I've been using cambium/Motorola FSK products now for 10 years but the EPMP >>> product has a few things that I can't quite get to work >>> The main one that concerns me is that I'm using an integrated SM and at any >>> distance from the tower I can make it connect as long as I know the SSID. >>> But what is the trick to making it show available SS IDs to connect to sort >>> of like the scan available access points feature in ubiquity? >>> The second question is that even a very close distances and was very good >>> signals like -53 I have difficulty getting good uplink capacity the quality >>> seems to be reasonable 90% or above but the capacity varies from 15% to 45% >>> most of the time and it's obvious in the speed test that the uplink is not >>> doing what it should >>> What am I doing wrong photo is attached of what I'm talking about in the >>> second question >>> >>> Sent from my iPhone
