What if you bought his network? What does that make you? 









(Yes, I'm aware I set myself up.) 




----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 



Midwest Internet Exchange 
http://www.midwest-ix.com 


----- Original Message -----

From: "George Skorup" <[email protected]> 
To: [email protected] 
Sent: Sunday, June 7, 2015 3:18:43 PM 
Subject: Re: [AFMUG] ePMP VoIP QoS 

This industry turns you into an old man. :) If you were on Michael's P15 lists, 
you're an old man around here. 


On 6/7/2015 2:44 PM, Mike Hammett wrote: 



Until I met you, I thought you were an old man. ;-) 




----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 



Midwest Internet Exchange 
http://www.midwest-ix.com 


----- Original Message -----

From: "George Skorup" <[email protected]> 
To: [email protected] 
Sent: Sunday, June 7, 2015 2:41:29 PM 
Subject: Re: [AFMUG] ePMP VoIP QoS 

I'm 30 and I listen to stuff like Zeppelin, Pink Floyd, Bad Company and newer 
stuff like Metallica and Alice in Chains. I did like some of the pop crap in 
the '90s, but I was a kid, and stupid. These kids today and the garbage they 
listen to. It's disgusting. 

Now I sound like an old fart. Get off my lawn! 


On 6/7/2015 2:05 PM, Ken Hohhof wrote: 

<blockquote>



I kind of tuned out from music in the 70’s. Too much ABBA, Bee Gees and Donna 
Summer. Still hear “Hot Stuff” on the radio though. 
https://www.youtube.com/watch?v=wPlV2dzXWCw 

My familiarity with the Allman Brothers Band comes mainly from their work with 
Eric Clapton. 




From: George Skorup 
Sent: Sunday, June 07, 2015 1:52 PM 
To: [email protected] 
Subject: Re: [AFMUG] ePMP VoIP QoS 

I thought you were an old fart and knew everything about the '70s? :) 


On 6/7/2015 1:22 PM, Ken Hohhof wrote: 

<blockquote>



Ahhhh, was not familiar with that song. Nice. But consulting the interwebs, 
this would be the definitive version: 
https://www.youtube.com/watch?v=FUvxRjYqjEQ 

I also like the Wikipedia entry on “whipping boy”, I didn’t realize princes had 
whipping boys who were punished when the prince misbehaved. 





From: George Skorup 
Sent: Sunday, June 07, 2015 1:04 PM 
To: [email protected] 
Subject: Re: [AFMUG] ePMP VoIP QoS 

https://www.youtube.com/watch?v=3pCytK3LgfM 


On 6/7/2015 7:33 AM, Ken Hohhof wrote: 

<blockquote>



> It's always our fault. 

scape·goat 
ˈskāpˌɡōt / 
noun 
noun: scapegoat ; plural noun: scapegoats 


1 . 


(in the Bible) a goat sent into the wilderness after the Jewish chief priest 
had symbolically laid the sins of the people upon it (Lev. 16). 


    * 


a person who is blamed for the wrongdoings, mistakes, or faults of others, 
especially for reasons of expediency. 

        synonyms:       whipping boy ; 
    * 





-----Original Message----- 
From: George Skorup 
Sent: Saturday, June 06, 2015 11:17 PM 
To: [email protected] 
Subject: Re: [AFMUG] ePMP VoIP QoS 

I disagree. This is exactly what Canopy does. DSCP12/AF is sent over the 
HP channel. Look at the default DiffServ table and see for yourself. 
Many managed switches are set up exactly the same way, except they have 
more queues, and Canopy only has MIR and HP. Well, there's LP CIR, but 
lets not get into that. ePMP just has "priority" which I assume means 
priority over everything else. 

I need a way to correct stupid manufacturer's mistakes (Grandstream 
being the worst offender). Lots of their devices ALWAYS send SIP packets 
as DSCP12 and this CANNOT be changed. Or the other one I mentioned, the 
GXP phones have one DSCP setting and this changes both SIP and RTP. I'm 
disgusted with their stupidity, but unfortunately it has to be supported 
because those devices aren't going away. 

It's totally doable and Cambium could add it by default, saving me time 
configuring every radio with it. Or just make DiffServ on ePMP 
work/configure like Canopy. 

I don't care what's wrong or right. I care about shit working right now 
and customers not being pissy. 

So the burden falls on the network as usual. It's always our fault. 
Sometimes I just don't know how I haven't murdered people. If I drank, 
it would probably happen. And I'm finding myself agreeing with that one 
guy Steve every other day now. Stupidity has no limit. 

On 6/6/2015 10:31 PM, Faisal Imtiaz wrote: 
>> Yo Cambium, you need to add DSCP 12 (Assured Forwarding) in addition to 
>> DSCP 46 (Expedited Forwarding) to the default VoIP priority 
>> configuration. 
> That would be a mistake and the wrong thing to do. 
> 
>> We're finding more devices sending SIP packets as AF and 
>> RTP as EF. 
> When a device is mis-configured, why should the burden of dealing with that 
> mis-configurtion as a default fall on another device 
> 
> There is plenty of flexibility to override the wrong setup of a device, if 
> that is they way you want to correct it in your radios... 
> (Which by all standards would be the wrong way to fix it...but more power to 
> you). 
> 
> Two wrongs don't make a right.. 
> 
> 
> Regards. 
> 
> 
> Faisal Imtiaz 
> Snappy Internet & Telecom 
> 7266 SW 48 Street 
> Miami, FL 33155 
> Tel: 305 663 5518 x 232 
> 
> Help-desk: (305)663-5518 Option 2 or Email: [email protected] 
> 
> ----- Original Message ----- 
>> From: "George Skorup" mailto:[email protected] 
>> To: [email protected] 
>> Sent: Saturday, June 6, 2015 10:27:05 PM 
>> Subject: [AFMUG] ePMP VoIP QoS 
>> 
>> Yo Cambium, you need to add DSCP 12 (Assured Forwarding) in addition to 
>> DSCP 46 (Expedited Forwarding) to the default VoIP priority 
>> configuration. We're finding more devices sending SIP packets as AF and 
>> RTP as EF. AF isn't prioritized and out-of-band signaling (prompts, etc) 
>> are sent as SIP messages so sometimes these are getting dropped, not to 
>> mention registrations, invites, etc. And more devices are stupid (mostly 
>> Grandstream), they only let you set ONE priority value for the entire 
>> device. These are coming default as DSCP12/AF. I've tried to get 
>> everyone to change this to 46, but they don't remember. 
>> 
>> Or just apply the whole Canopy DiffServ table. We've never had to change 
>> any of those code points. Turn HP on, it just works. 
>> 




</blockquote>


</blockquote>



</blockquote>


Reply via email to