I don't have any of the ac radios, only M. Does it have Multicast Data -
Allow All (check box)? If that's unchecked, then multicast will not be
allowed over the RF interface, thus OSPF (which is multicast) will not work.
Other than that, are you sure you have MT OSPF configured correctly? If
not that, then I have no idea. Kick it in the pants?
On 9/24/2015 9:58 PM, Tim Reichhart wrote:
so if the multicast filtering can cause ospf not to work correctly? Even there
is no option for wds on the newer firmware?
Tim
-----Original Message-----
From: "George Skorup" <[email protected]>
To: [email protected]
Date: 09/24/15 10:53 PM
Subject: Re: [AFMUG] ospf issues with pbe-5ac-500 not passing
Does this new 11ac stuff have multicast filtering like the M series? I
think it's on the advanced tab. I made that mistake once.
On 9/24/2015 9:44 PM, Rhys Cuff (Latrobe I.T) wrote:
I find you need WDS enabled
-----Original Message-----
From: Af [mailto:[email protected]] On Behalf Of Tim Reichhart
Sent: Friday, 25 September 2015 12:32 PM
To: [email protected]
Subject: [AFMUG] ospf issues with pbe-5ac-500 not passing
I am having an weird issues with my PowerBeam 5AC 500 with ospf traffic not
passing through and I am using these PowerBeam 5AC 500 as backhauls and they
are connected to mikrotik. I am running firmware 7.1.4xc and not doing nbma
setup.
Tim
