I thought they were just always supposed to be transparent bridges, so wds isn't needed. I do have OSPF working over several PowerBeam AC links, and I didn't do anything special to make it work.
On Thu, Sep 24, 2015 at 11:27 PM, That One Guy /sarcasm < [email protected]> wrote: > I'm poking at eoip tunnels with ospf inside > > why did they remove wds? > > On Thu, Sep 24, 2015 at 10:11 PM, George Skorup <[email protected]> wrote: > >> I don't have any of the ac radios, only M. Does it have Multicast Data - >> Allow All (check box)? If that's unchecked, then multicast will not be >> allowed over the RF interface, thus OSPF (which is multicast) will not work. >> >> Other than that, are you sure you have MT OSPF configured correctly? If >> not that, then I have no idea. Kick it in the pants? >> >> On 9/24/2015 9:58 PM, Tim Reichhart wrote: >> >>> so if the multicast filtering can cause ospf not to work correctly? Even >>> there is no option for wds on the newer firmware? >>> >>> Tim >>> >>> -----Original Message----- >>> >>>> From: "George Skorup" <[email protected]> >>>> To: [email protected] >>>> Date: 09/24/15 10:53 PM >>>> Subject: Re: [AFMUG] ospf issues with pbe-5ac-500 not passing >>>> >>>> Does this new 11ac stuff have multicast filtering like the M series? I >>>> think it's on the advanced tab. I made that mistake once. >>>> >>>> On 9/24/2015 9:44 PM, Rhys Cuff (Latrobe I.T) wrote: >>>> >>>>> I find you need WDS enabled >>>>> >>>>> >>>>> -----Original Message----- >>>>> From: Af [mailto:[email protected]] On Behalf Of Tim Reichhart >>>>> Sent: Friday, 25 September 2015 12:32 PM >>>>> To: [email protected] >>>>> Subject: [AFMUG] ospf issues with pbe-5ac-500 not passing >>>>> >>>>> I am having an weird issues with my PowerBeam 5AC 500 with ospf >>>>> traffic not passing through and I am using these PowerBeam 5AC 500 as >>>>> backhauls and they are connected to mikrotik. I am running firmware >>>>> 7.1.4xc >>>>> and not doing nbma setup. >>>>> >>>>> Tim >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>> >>> >>> >> > > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. >
