Links by default now run under WDS.. So they removed the ability to disable it.

 

-PK

 

From: Af [mailto:[email protected]] On Behalf Of That One Guy /sarcasm
Sent: Thursday, September 24, 2015 9:27 PM
To: [email protected]
Subject: Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

 

I'm poking at eoip tunnels with ospf inside

 

why did they remove wds?

 

On Thu, Sep 24, 2015 at 10:11 PM, George Skorup <[email protected] 
<mailto:[email protected]> > wrote:

I don't have any of the ac radios, only M. Does it have Multicast Data - Allow 
All (check box)? If that's unchecked, then multicast will not be allowed over 
the RF interface, thus OSPF (which is multicast) will not work.

Other than that, are you sure you have MT OSPF configured correctly? If not 
that, then I have no idea. Kick it in the pants?

On 9/24/2015 9:58 PM, Tim Reichhart wrote:

so if the multicast filtering can cause ospf not to work correctly? Even there 
is no option for wds on the newer firmware?

Tim

-----Original Message-----

From: "George Skorup" <[email protected] <mailto:[email protected]> >
To: [email protected] <mailto:[email protected]> 
Date: 09/24/15 10:53 PM
Subject: Re: [AFMUG] ospf issues with pbe-5ac-500 not passing

Does this new 11ac stuff have multicast filtering like the M series? I
think it's on the advanced tab. I made that mistake once.

On 9/24/2015 9:44 PM, Rhys Cuff (Latrobe I.T) wrote:

I find you need WDS enabled


-----Original Message-----
From: Af [mailto:[email protected] <mailto:[email protected]> ] On Behalf 
Of Tim Reichhart
Sent: Friday, 25 September 2015 12:32 PM
To: [email protected] <mailto:[email protected]> 
Subject: [AFMUG] ospf issues with pbe-5ac-500 not passing

I am having an weird issues with my PowerBeam 5AC 500 with ospf traffic not 
passing through and I am using these PowerBeam 5AC 500 as backhauls and they 
are connected to mikrotik. I am running firmware 7.1.4xc and not doing nbma 
setup.

Tim










 




-- 

If you only see yourself as part of the team but you don't see your team as 
part of yourself you have already failed as part of the team.

Reply via email to