I'm poking at eoip tunnels with ospf inside why did they remove wds?
On Thu, Sep 24, 2015 at 10:11 PM, George Skorup <[email protected]> wrote: > I don't have any of the ac radios, only M. Does it have Multicast Data - > Allow All (check box)? If that's unchecked, then multicast will not be > allowed over the RF interface, thus OSPF (which is multicast) will not work. > > Other than that, are you sure you have MT OSPF configured correctly? If > not that, then I have no idea. Kick it in the pants? > > On 9/24/2015 9:58 PM, Tim Reichhart wrote: > >> so if the multicast filtering can cause ospf not to work correctly? Even >> there is no option for wds on the newer firmware? >> >> Tim >> >> -----Original Message----- >> >>> From: "George Skorup" <[email protected]> >>> To: [email protected] >>> Date: 09/24/15 10:53 PM >>> Subject: Re: [AFMUG] ospf issues with pbe-5ac-500 not passing >>> >>> Does this new 11ac stuff have multicast filtering like the M series? I >>> think it's on the advanced tab. I made that mistake once. >>> >>> On 9/24/2015 9:44 PM, Rhys Cuff (Latrobe I.T) wrote: >>> >>>> I find you need WDS enabled >>>> >>>> >>>> -----Original Message----- >>>> From: Af [mailto:[email protected]] On Behalf Of Tim Reichhart >>>> Sent: Friday, 25 September 2015 12:32 PM >>>> To: [email protected] >>>> Subject: [AFMUG] ospf issues with pbe-5ac-500 not passing >>>> >>>> I am having an weird issues with my PowerBeam 5AC 500 with ospf traffic >>>> not passing through and I am using these PowerBeam 5AC 500 as backhauls and >>>> they are connected to mikrotik. I am running firmware 7.1.4xc and not doing >>>> nbma setup. >>>> >>>> Tim >>>> >>>> >>>> >>>> >>>> >>>> >> >> >> > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
