I didn't do anything - they just worked. Are you running them in PTP mode, or PTMP?
On Fri, Sep 25, 2015 at 7:27 AM, Tim Reichhart < [email protected]> wrote: > Mathew > please tell me how you got it to work because me and justin wilson is > having hell of time getting my backhaul link to pass the ospf. > > Tim > > ------------------------------ > -----Original Message----- > From: "That One Guy /sarcasm" <[email protected]> > To: [email protected] > Date: 09/25/15 12:52 AM > Subject: Re: [AFMUG] ospf issues with pbe-5ac-500 not passing > > that makes sense > > On Thu, Sep 24, 2015 at 11:38 PM, Peter Kranz <[email protected]> > wrote: > >> Links by default now run under WDS.. So they removed the ability to >> disable it. >> >> >> >> -PK >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of* That One Guy >> /sarcasm >> *Sent:* Thursday, September 24, 2015 9:27 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] ospf issues with pbe-5ac-500 not passing >> >> >> >> I'm poking at eoip tunnels with ospf inside >> >> >> >> why did they remove wds? >> >> >> >> >> On Thu, Sep 24, 2015 at 10:11 PM, George Skorup <[email protected]> >> wrote: >> >> I don't have any of the ac radios, only M. Does it have Multicast Data - >> Allow All (check box)? If that's unchecked, then multicast will not be >> allowed over the RF interface, thus OSPF (which is multicast) will not work. >> >> Other than that, are you sure you have MT OSPF configured correctly? If >> not that, then I have no idea. Kick it in the pants? >> >> On 9/24/2015 9:58 PM, Tim Reichhart wrote: >> >> so if the multicast filtering can cause ospf not to work correctly? Even >> there is no option for wds on the newer firmware? >> >> Tim >> >> -----Original Message----- >> >> From: "George Skorup" <[email protected]> >> To: [email protected] >> Date: 09/24/15 10:53 PM >> Subject: Re: [AFMUG] ospf issues with pbe-5ac-500 not passing >> >> Does this new 11ac stuff have multicast filtering like the M series? I >> think it's on the advanced tab. I made that mistake once. >> >> On 9/24/2015 9:44 PM, Rhys Cuff (Latrobe I.T) wrote: >> >> I find you need WDS enabled >> >> >> -----Original Message----- >> From: Af [mailto:[email protected]] On Behalf Of Tim Reichhart >> Sent: Friday, 25 September 2015 12:32 PM >> To: [email protected] >> Subject: [AFMUG] ospf issues with pbe-5ac-500 not passing >> >> I am having an weird issues with my PowerBeam 5AC 500 with ospf traffic >> not passing through and I am using these PowerBeam 5AC 500 as backhauls and >> they are connected to mikrotik. I am running firmware 7.1.4xc and not doing >> nbma setup. >> >> Tim >> >> >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> If you only see yourself as part of the team but you don't see your team >> as part of yourself you have already failed as part of the team. >> >> >> > > > > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. > > >
