An OSPF PTP link between two routers is usually configured as a /30 , no? What are your MTU and other settings on the interfaces on both sides? Other things like CDP , LDP? On Sep 25, 2015 4:56 PM, "Tim Reichhart" <[email protected]> wrote:
> Mathew > I am running my links in PTP mode but I am splitting my backhauls in /29 > on each interface I dont know if that would cause any problems. > > Tim > > ------------------------------ > -----Original Message----- > From: "Mathew Howard" <[email protected]> > To: af <[email protected]> > Date: 09/25/15 11:03 AM > Subject: Re: [AFMUG] ospf issues with pbe-5ac-500 not passing > > I didn't do anything - they just worked. Are you running them in PTP mode, > or PTMP? > > > On Fri, Sep 25, 2015 at 7:27 AM, Tim Reichhart < > [email protected]> wrote: > >> Mathew >> please tell me how you got it to work because me and justin wilson is >> having hell of time getting my backhaul link to pass the ospf. >> >> Tim >> >> ------------------------------ >> -----Original Message----- >> From: "That One Guy /sarcasm" <[email protected]> >> To: [email protected] >> Date: 09/25/15 12:52 AM >> Subject: Re: [AFMUG] ospf issues with pbe-5ac-500 not passing >> >> that makes sense >> >> On Thu, Sep 24, 2015 at 11:38 PM, Peter Kranz <[email protected]> >> wrote: >> >>> Links by default now run under WDS.. So they removed the ability to >>> disable it. >>> >>> >>> >>> -PK >>> >>> >>> >>> *From:* Af [mailto:[email protected]] *On Behalf Of* That One Guy >>> /sarcasm >>> *Sent:* Thursday, September 24, 2015 9:27 PM >>> *To:* [email protected] >>> *Subject:* Re: [AFMUG] ospf issues with pbe-5ac-500 not passing >>> >>> >>> >>> I'm poking at eoip tunnels with ospf inside >>> >>> >>> >>> why did they remove wds? >>> >>> >>> >>> >>> On Thu, Sep 24, 2015 at 10:11 PM, George Skorup <[email protected]> >>> wrote: >>> >>> I don't have any of the ac radios, only M. Does it have Multicast Data - >>> Allow All (check box)? If that's unchecked, then multicast will not be >>> allowed over the RF interface, thus OSPF (which is multicast) will not work. >>> >>> Other than that, are you sure you have MT OSPF configured correctly? If >>> not that, then I have no idea. Kick it in the pants? >>> >>> On 9/24/2015 9:58 PM, Tim Reichhart wrote: >>> >>> so if the multicast filtering can cause ospf not to work correctly? Even >>> there is no option for wds on the newer firmware? >>> >>> Tim >>> >>> -----Original Message----- >>> >>> From: "George Skorup" <[email protected]> >>> To: [email protected] >>> Date: 09/24/15 10:53 PM >>> Subject: Re: [AFMUG] ospf issues with pbe-5ac-500 not passing >>> >>> Does this new 11ac stuff have multicast filtering like the M series? I >>> think it's on the advanced tab. I made that mistake once. >>> >>> On 9/24/2015 9:44 PM, Rhys Cuff (Latrobe I.T) wrote: >>> >>> I find you need WDS enabled >>> >>> >>> -----Original Message----- >>> From: Af [mailto:[email protected]] On Behalf Of Tim Reichhart >>> Sent: Friday, 25 September 2015 12:32 PM >>> To: [email protected] >>> Subject: [AFMUG] ospf issues with pbe-5ac-500 not passing >>> >>> I am having an weird issues with my PowerBeam 5AC 500 with ospf traffic >>> not passing through and I am using these PowerBeam 5AC 500 as backhauls and >>> they are connected to mikrotik. I am running firmware 7.1.4xc and not doing >>> nbma setup. >>> >>> Tim >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> -- >>> >>> If you only see yourself as part of the team but you don't see your team >>> as part of yourself you have already failed as part of the team. >>> >>> >>> >> >> >> >> >> -- >> If you only see yourself as part of the team but you don't see your team >> as part of yourself you have already failed as part of the team. >> >> >> >> >> > > > > >
